Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.2.12-gentoo (root@coreboot) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.5, pie-0.4.7) ) #3 SMP PREEMPT Thu Jun 14 05:44:56 CEST 2012 Command line: root=/dev/sda2 console=tty0 console=ttyS0,115200,n8 pci=nocrs BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable) BIOS-e820: 00000000bffe0000 - 00000000e0000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 0000000100000000 - 0000000418000000 (usable) NX (Execute Disable) protection: active DMI present. No AGP bridge found last_pfn = 0x418000 max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xbffe0 max_arch_pfn = 0x400000000 found SMP MP-table at [ffff8800000fda00] fda00 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000bffe0000 init_memory_mapping: 0000000100000000-0000000418000000 ACPI: RSDP 00000000000fd9e0 00014 (v00 CORE ) ACPI: RSDT 00000000bffe2424 0003C (v01 CORE COREBOOT 00000000 CORE 00000000) ACPI: FACP 00000000bffe53f8 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) ACPI: DSDT 00000000bffe24c8 02EF0 (v02 ASUS COREBOOT 00010001 INTL 20090123) ACPI: FACS 00000000bffe53b8 00040 ACPI: HPET 00000000bffe54f0 00038 (v01 CORE COREBOOT 00000000 CORE 00000000) ACPI: APIC 00000000bffe5528 0008C (v01 CORE COREBOOT 00000000 CORE 00000000) ACPI: HEST 00000000bffe55b8 001D0 (v01 CORE COREBOOT 00000000 CORE 00000000) ACPI: SSDT 00000000bffe5790 01714 (v01 AMD POWERNOW 00000001 AMD 00000001) ACPI: SSDT 00000000bffe6eb0 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A) No NUMA configuration found Faking a node at 0000000000000000-0000000418000000 Initmem setup node 0 0000000000000000-0000000418000000 NODE_DATA [0000000417ffb000 - 0000000417ffffff] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00418000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000bffe0 0: 0x00100000 -> 0x00418000 ACPI: PM-Timer IO Port: 0x808 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x15] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x43538210 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000bffe0000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 PM: Registered nosave memory: 00000000fc000000 - 0000000100000000 Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff880417c00000 s76416 r8192 d21888 u262144 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3963242 Policy zone: Normal Kernel command line: root=/dev/sda2 console=tty0 console=ttyS0,115200,n8 pci=nocrs PID hash table entries: 4096 (order: 3, 32768 bytes) xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 Checking aperture... No AGP bridge found Node 0: aperture @ b292000000 size 32 MB Aperture beyond 4GB. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ b4000000 PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000 Memory: 15722144k/17170432k available (7836k kernel code, 1049156k absent, 399132k reserved, 5094k data, 652k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:744 16 Console: colour dummy device 80x25 console [tty0] enabled console [ttyS0] enabled Fast TSC calibration using PIT Detected 3099.920 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6199.84 BogoMIPS (lpj=3099920) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 7 MCE banks ACPI: Core revision 20110623 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: AMD FX(tm)-8120 Eight-Core Processor stepping 02 Performance Events: AMD Family 15h PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 6 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000003f MCE: In-kernel MCE decoding enabled. Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. Brought up 8 CPUs Total of 8 processors activated (49596.67 BogoMIPS). RTC time: 21:31:58, date: 01/03/13 NET: Registered protocol family 16 kworker/u:0 used greatest stack depth: 5424 bytes left Extended Config Space enabled on 1 nodes ACPI: bus type pci registered PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Executed 2 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: BIOS offers _BFS ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi@vger.kernel.org ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [PFN0] (on) ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:09.0: PCI bridge to [bus 02-02] pci 0000:00:0a.0: PCI bridge to [bus 03-03] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) pci 0000:00:15.0: PCI bridge to [bus 05-05] pci 0000:00:15.1: PCI bridge to [bus 06-06] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC control (0x1d) granted ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:05.0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. PCI: Using ACPI for IRQ routing cfg80211: Calling CRDA to update world regulatory domain NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] pci 0000:00:01.0: bridge window [mem 0xe0100000-0xe02fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] pci 0000:00:09.0: PCI bridge to [bus 02-02] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff] pci 0000:00:09.0: bridge window [mem 0xe0300000-0xe03fffff] pci 0000:00:0a.0: PCI bridge to [bus 03-03] pci 0000:00:0a.0: bridge window [mem 0xe0400000-0xe04fffff] pci 0000:00:14.4: PCI bridge to [bus 04-04] pci 0000:00:15.0: PCI bridge to [bus 05-05] pci 0000:00:15.1: PCI bridge to [bus 06-06] pci 0000:00:15.1: bridge window [io 0x3000-0x3fff] pci 0000:00:15.1: bridge window [mem 0xe0000000-0xe00fffff 64bit pref] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 8192 (order: 6, 262144 bytes) UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:12.0: PCI INT A disabled pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:12.2: PCI INT B disabled pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:13.0: PCI INT A disabled pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:13.2: PCI INT B disabled pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:14.5: PCI INT C disabled pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:16.0: PCI INT A disabled pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:16.2: PCI INT B disabled pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:03:00.0: PCI INT A disabled PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ b4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture perf: AMD IBS detected (0x000000ff) microcode: CPU0: patch_level=0x06000624 microcode: CPU1: patch_level=0x06000624 microcode: CPU2: patch_level=0x06000624 microcode: CPU3: patch_level=0x06000624 microcode: CPU4: patch_level=0x06000624 microcode: CPU5: patch_level=0x06000624 microcode: CPU6: patch_level=0x06000624 microcode: CPU7: patch_level=0x06000624 microcode: Microcode Update Driver: v2.00 , Peter Oruba audit: initializing netlink socket (disabled) type=2000 audit(1357248717.119:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) NTFS driver 2.1.30 [Flags: R/W]. msgmni has been set to 30836 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Non-volatile memory driver v1.3 Linux agpgart interface v0.103 input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: Fan [FAN0] (on) thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (40 C) [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1002:0x0000). [drm] register mmio base: 0xE0200000 [drm] register mmio size: 65536 radeon 0000:01:05.0: Invalid ROM contents [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM radeon 0000:01:05.0: Fatal error during GPU init [drm] radeon: finishing device. [TTM] Memory type 2 has not been initialized. radeon 0000:01:05.0: PCI INT A disabled radeon: probe of 0000:01:05.0 failed with error -22 brd: module loaded loop: module loaded ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m1024@0xe0508000 port 0xe0508100 irq 19 ata2: SATA max UDMA/133 abar m1024@0xe0508000 port 0xe0508180 irq 19 ata3: SATA max UDMA/133 abar m1024@0xe0508000 port 0xe0508200 irq 19 ata4: SATA max UDMA/133 abar m1024@0xe0508000 port 0xe0508280 irq 19 ata5: SATA max UDMA/133 abar m1024@0xe0508000 port 0xe0508300 irq 19 ata6: SATA max UDMA/133 abar m1024@0xe0508000 port 0xe0508380 irq 19 Refined TSC clocksource calibration: 3100.111 MHz. Switching to clocksource tsc e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. sky2: driver version 1.30 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:06:00.0: eth0: RTL8168evl/8111evl at 0xffffc900025d0000, 00:00:00:00:00:03, XID 0c900800 IRQ 44 r8169 0000:06:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xe0508400 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.2.12-gentoo ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 17, io mem 0xe0508500 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 3.2.12-gentoo ehci_hcd usb usb2: SerialNumber: 0000:00:13.2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:16.2: EHCI Host Controller ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci_hcd 0000:00:16.2: debug port 1 ehci_hcd 0000:00:16.2: irq 17, io mem 0xe0508600 ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 3.2.12-gentoo ehci_hcd usb usb3: SerialNumber: 0000:00:16.2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.0: irq 18, io mem 0xe0504000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 3.2.12-gentoo ohci_hcd usb usb4: SerialNumber: 0000:00:12.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xe0505000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 3.2.12-gentoo ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:14.5: irq 18, io mem 0xe0506000 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 3.2.12-gentoo ohci_hcd usb usb6: SerialNumber: 0000:00:14.5 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:16.0: OHCI Host Controller ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:16.0: irq 18, io mem 0xe0507000 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: OHCI Host Controller usb usb7: Manufacturer: Linux 3.2.12-gentoo ohci_hcd usb usb7: SerialNumber: 0000:00:16.0 hub 7-0:1.0: USB hub found hub 7-0:1.0: 4 ports detected uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:01: RTC can wake from S4 rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram, hpet irqs device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver usbhid usbhid: USB HID core driver snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda-intel: no codecs initialized snd_hda_intel 0000:00:14.2: PCI INT A disabled snd_hda_intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 hda-intel: Codec #0 probe error; disabling it... hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503 ALSA device list: #0: HDA ATI HDMI at 0xe0210000 irq 19 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Registering the dns_resolver key type registered taskstats version 1 Magic number: 13:897:549 pci_link PNP0C0F:00: hash matches console [netcon0] enabled netconsole: network logging started ata2: softreset failed (1st FIS failed) ata1: softreset failed (1st FIS failed) ata2: softreset failed (1st FIS failed) ata1: softreset failed (1st FIS failed) ata2: softreset failed (1st FIS failed) ata2: limiting SATA link speed to 3.0 Gbps ata1: softreset failed (1st FIS failed) ata1: limiting SATA link speed to 3.0 Gbps ata2: softreset failed (1st FIS failed) ata2: reset failed, giving up ata1: softreset failed (1st FIS failed) ata1: reset failed, giving up md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. Root-NFS: no NFS server address VFS: Unable to mount root fs via NFS, trying floppy. VFS: Cannot open root device "sda2" or unknown-block(2,0) Please append a correct "root=" boot option; here are the available partitions: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) Pid: 1, comm: swapper/0 Not tainted 3.2.12-gentoo #3 Call Trace: [] panic+0x96/0x1a4 [] ? printk+0x3c/0x3e [] mount_block_root+0x14a/0x1ea [] mount_root+0xe0/0xeb [] ? sys_unlink+0x11/0x20 [] prepare_namespace+0x170/0x19d [] kernel_init+0x140/0x150 [] kernel_thread_helper+0x4/0x10 [] ? start_kernel+0x342/0x342 [] ? gs_change+0xb/0xb