I've compiled support for the Siemens 'sitemp' Mainboard. The board is similar to the AMD dbm690t.
I adapt the code from dbm690t according to customer requirement specification.
Linux is booting with seabios/filo.
Windows XP is booting with seabios.

This board comes with two hardware variants so I have to set up subvendor/device ids accordingly.
Also I've found an issue:
The default 'pci_set_subsystem' sets the subvendor/device id register# 0x2c. However, for a few devices in the RS690 the register is 0x4c respectively 0x50.

Moved 'pci_set_subsystem' to a weak function in 'pci_device.c'. So boards can add an override for the default function in mainboard/../override_df.c (or mainboard.c) and set it up too.

Hoping to receive a 'ack'.

Thanks


Signed-off-by: Josef Kellermann joseph.kellermann@heitec.de



IMPORTANT NOTICE / WICHTIGER HINWEIS
This communication contains information which is confidential and may also be privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) please note that any distribution, copying or use of this communication or the information in it is strictly prohibited. If you have received this communication in error please notify us immediately by email or by telephone and then delete this email and any copies of it.
Diese E-Mail koennte vertrauliche und/oder rechtlich geschuetzte Informationen enthalten. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail sind nicht gestattet.

HEITEC AG, Werner-von-Siemens-Str. 61, 91052 Erlangen, HRB 7754, RG Fuerth, Vorstandsvorsitzender: Richard Heindl, Vorstand: Harald Preiml, Finanzvorstand: Rene-Oliver Rosner, Aufsichtsratsvorsitzender: Dr. Lorenz M. Raith, WWW: http://www.heitec.de