Hello,

I've set up a computer with Asus KGPE-D16 recently. I use an Winbond W25Q64.V 8M flash chip and tested with this config with only ROM size changed:
https://review.coreboot.org/gitweb/cgit/board-status.git/tree/asus/kgpe-d16/4.5-759-gab8f7d3/2017-01-04T21_18_55Z/config.short.txt

And it can boot to my OS on disk. However, after I enabled the serial console, I can only see:

"FCH SPI: Too much to write. Does your SPI chip driver use spi_crop_chunk()?"

And the machine cannot boot.

Has anyone seen this issue before?

Thanks,

Iru

Please do not send me Microsoft Office/Apple iWork documents. Send OpenDocument instead! http://fsf.org/campaigns/opendocument/