Hi Ron/All members of the LinuxBIOS group,

I am new to the linuxBIOS technology.And wanetd to use the linuxBIOS stuff.But after creating the rom image and burning the chip,

i was not able to see anything on either on display or on serial console.Can any one help me getting out of the problem.

I am giving all the details so that you people can make out where am missing?

Board Details:

The contain chips from Via

Northbridge: VT 8606(with AGP VGA Controller S3 Savage- twister)

South Bridge: VIA VT82C686A

BIOS Chip: 1MB

ocessor

Processor: PentiumIII or Celeron300MHz, 100 MHz Bus

One SO-DIMM socket, 512 MByte max. PC100/ PC133

Two enhanced IDE ports

SoundBlaster™ compatible AC97

I used the configuration available for VIA/EPIA and Image was successfully created.Initially i tried to use the support avialble for VT8601.But i think, iam not getting the northbridge chip intialised.

If anyone have the support avialble for VT8606, then let me know.

Just help me out so that i can get something on the serial console.After that debugging will become a little bit easier.

Thanks & regards

Sanjay