LinuxBIOS-1.1.8_s2881_Fallback Tue Jan 3 17:36:16 EST 2006 starting... (0,1) link=00 (1,0) link=00 02 nodes initialized. core0: --- { APICID = 02 NODEID = 01 COREID = 00} --- SBLink=02 NC node|link=02 ht reset - LinuxBIOS-1.1.8_s2881_Fallback Tue Jan 3 17:36:16 EST 2006 starting... (0,1) link=00 (1,0) link=00 02 nodes initialized. core0: --- { APICID = 02 NODEID = 01 COREID = 00} --- SBLink=02 NC node|link=02 Ram1.00 Ram1.01 Ram2.00 Ram2.01 Ram3 Initializing memory: done Initializing memory: done Ram4 v_esp=000cfd40 cpu_reset = 00000000 Clearing initial memory region: No cache as ram now - Use Ram as Stack now - done new_cpu_reset = 00000000 Copying LinuxBIOS to ram. src=fffe0004 dst=00004000 linxbios_ram.bin length = 0001928c Jumping to LinuxBIOS. LinuxBIOS-1.1.8_s2881_Fallback Tue Jan 3 17:36:16 EST 2006 booting... Enumerating buses... APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled PCI: 00:18.3 siblings=1 CPU: APIC: 00 enabled CPU: APIC: 01 enabled PCI: 00:19.0 [1022/1100] enabled PCI: 00:19.1 [1022/1101] enabled PCI: 00:19.2 [1022/1102] enabled PCI: 00:19.3 [1022/1103] enabled PCI: 00:19.3 siblings=1 CPU: APIC: 02 enabled CPU: APIC: 03 enabled PCI: pci_scan_bus for bus 0 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] enabled PCI: 00:19.0 [1022/1100] enabled PCI: 00:19.1 [1022/1101] enabled PCI: 00:19.2 [1022/1102] enabled PCI: 00:19.3 [1022/1103] enabled PCI: 01:00.0 [1022/7450] enabled PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003 PCI: 01:00.0 [1022/7460] enabled PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007 PCI: pci_scan_bus for bus 1 PCI: 01:01.0 [1022/7450] enabled PCI: 01:01.1 [1022/7451] enabled PCI: 01:02.0 [1022/7450] enabled PCI: 01:02.1 [1022/7451] enabled PCI: 01:03.0 [1022/7460] enabled PCI: 01:04.0 [1022/7468] enabled PCI: 01:04.1 [1022/7469] enabled PCI: 01:04.2 [1022/746a] enabled PCI: 01:04.3 [1022/746b] enabled PCI: pci_scan_bus for bus 2 PCI: 02:09.0 [14e4/1648] enabled PCI: 02:09.1 [14e4/1648] enabled Disabling static device: PCI: 02:0a.0 Disabling static device: PCI: 02:0a.1 PCI: pci_scan_bus returning with max=02 PCI: 02: 100MHz PCI-X PCI: pci_scan_bus for bus 3 PCI: pci_scan_bus returning with max=03 PCI: 03: 133MHz PCI-X PCI: pci_scan_bus for bus 4 PCI: 04:00.0 [1022/7464] enabled PCI: 04:00.1 [1022/7464] enabled PCI: 04:05.0 [1095/3114] enabled PCI: 04:06.0 [1002/4752] enabled PCI: pci_scan_bus returning with max=04 PNP: 002e.0 enabled PNP: 002e.1 disabled PNP: 002e.2 enabled PNP: 002e.3 disabled PNP: 002e.5 enabled PNP: 002e.6 disabled PNP: 002e.7 disabled PNP: 002e.8 disabled PNP: 002e.9 disabled PNP: 002e.a disabled PNP: 002e.b enabled smbus: PCI: 01:04.3[0]->I2C: 01:50 enabled smbus: PCI: 01:04.3[0]->I2C: 01:51 enabled smbus: PCI: 01:04.3[0]->I2C: 01:52 enabled smbus: PCI: 01:04.3[0]->I2C: 01:53 enabled smbus: PCI: 01:04.3[0]->I2C: 01:54 enabled smbus: PCI: 01:04.3[0]->I2C: 01:55 enabled smbus: PCI: 01:04.3[0]->I2C: 01:56 enabled smbus: PCI: 01:04.3[0]->I2C: 01:57 enabled smbus: PCI: 01:04.3[0]->I2C: 01:2d enabled smbus: PCI: 01:04.3[0]->I2C: 01:2a enabled smbus: PCI: 01:04.3[0]->I2C: 01:49 enabled smbus: PCI: 01:04.3[0]->I2C: 01:4a enabled PCI: pci_scan_bus returning with max=04 PCI: pci_scan_bus returning with max=04 done Allocating resources... Reading resources... PCI: 01:01.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 2 io PCI: 01:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 2 prefmem PCI: 01:03.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 4 prefmem Done reading resources. Setting resources... PCI: 00:18.0 1ba <- [0x00fd300000 - 0x00fd2fffff] prefmem PCI: 00:18.0 1c2 <- [0x0000001000 - 0x0000002fff] io PCI: 00:18.0 1b2 <- [0x00fc000000 - 0x00fd2fffff] mem PCI: 01:01.0 20 <- [0x00fd100000 - 0x00fd1fffff] bus 2 mem PCI: 02:09.0 10 <- [0x00fd100000 - 0x00fd10ffff] mem64 PCI: 02:09.0 18 <- [0x00fd110000 - 0x00fd11ffff] mem64 PCI: 02:09.1 10 <- [0x00fd120000 - 0x00fd12ffff] mem64 PCI: 02:09.1 18 <- [0x00fd130000 - 0x00fd13ffff] mem64 PCI: 01:01.1 10 <- [0x00fd200000 - 0x00fd200fff] mem64 PCI: 01:02.1 10 <- [0x00fd201000 - 0x00fd201fff] mem64 PCI: 01:03.0 1c <- [0x0000001000 - 0x0000001fff] bus 4 io PCI: 01:03.0 20 <- [0x00fc000000 - 0x00fd0fffff] bus 4 mem PCI: 04:00.0 10 <- [0x00fd000000 - 0x00fd000fff] mem PCI: 04:00.1 10 <- [0x00fd001000 - 0x00fd001fff] mem PCI: 04:05.0 10 <- [0x0000001410 - 0x0000001417] io PCI: 04:05.0 14 <- [0x0000001430 - 0x0000001433] io PCI: 04:05.0 18 <- [0x0000001420 - 0x0000001427] io PCI: 04:05.0 1c <- [0x0000001440 - 0x0000001443] io PCI: 04:05.0 20 <- [0x0000001400 - 0x000000140f] io PCI: 04:05.0 24 <- [0x00fd003000 - 0x00fd0033ff] mem PCI: 04:06.0 10 <- [0x00fc000000 - 0x00fcffffff] mem PCI: 04:06.0 14 <- [0x0000001000 - 0x00000010ff] io PCI: 04:06.0 18 <- [0x00fd002000 - 0x00fd002fff] mem PCI: 04:06.0 30 <- [0x00fff80000 - 0x00fff9ffff] romem PNP: 002e.0 60 <- [0x00000003f0 - 0x00000003f7] io PNP: 002e.0 70 <- [0x0000000006 - 0x0000000006] irq PNP: 002e.0 74 <- [0x0000000002 - 0x0000000002] drq PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] io PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] irq PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq PNP: 002e.5 72 <- [0x000000000c - 0x000000000c] irq PNP: 002e.b 60 <- [0x0000000290 - 0x0000000297] io PNP: 002e.b 70 <- [0x0000000005 - 0x0000000005] irq PCI: 01:04.1 20 <- [0x0000002420 - 0x000000242f] io PCI: 01:04.2 10 <- [0x0000002400 - 0x000000241f] io PCI: 01:04.3 58 <- [0x0000002000 - 0x00000020ff] io PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] mem PCI: 00:19.3 94 <- [0x00f8000000 - 0x00fbffffff] mem Done setting resources. Done allocating resources. Enabling resourcess... PCI: 00:18.0 cmd <- 140 PCI: 01:01.0 bridge ctrl <- 0003 PCI: 01:01.0 cmd <- 146 PCI: 02:09.0 subsystem <- 10f1/2881 PCI: 02:09.0 cmd <- 142 PCI: 02:09.1 subsystem <- 10f1/2881 PCI: 02:09.1 cmd <- 142 PCI: 01:01.1 subsystem <- 10f1/2881 PCI: 01:01.1 cmd <- 146 PCI: 01:02.1 subsystem <- 10f1/2881 PCI: 01:02.1 cmd <- 146 PCI: 01:03.0 bridge ctrl <- 0003 PCI: 01:03.0 cmd <- 147 PCI: 04:00.0 subsystem <- 10f1/2881 PCI: 04:00.0 cmd <- 142 PCI: 04:00.1 subsystem <- 10f1/2881 PCI: 04:00.1 cmd <- 142 PCI: 04:05.0 subsystem <- 10f1/2881 PCI: 04:05.0 cmd <- 143 PCI: 04:06.0 subsystem <- 10f1/2881 PCI: 04:06.0 cmd <- 1c3 PCI: 01:04.0 subsystem <- 10f1/2881 PCI: 01:04.0 cmd <- 14f w83627hf hwm smbus enabled PCI: 01:04.1 subsystem <- 10f1/2881 PCI: 01:04.1 cmd <- 141 PCI: 01:04.2 subsystem <- 10f1/2881 PCI: 01:04.2 cmd <- 141 PCI: 01:04.3 subsystem <- 10f1/2881 PCI: 01:04.3 cmd <- 141 PCI: 00:18.1 subsystem <- 10f1/2881 PCI: 00:18.1 cmd <- 140 PCI: 00:18.2 subsystem <- 10f1/2881 PCI: 00:18.2 cmd <- 140 PCI: 00:18.3 cmd <- 140 PCI: 00:19.0 cmd <- 140 PCI: 00:19.1 cmd <- 140 PCI: 00:19.2 cmd <- 140 PCI: 00:19.3 cmd <- 140 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init Initializing CPU #0 CPU: vendor AMD device 20f12 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 microcode: patch id that want to apply= 0x0000004d microcode: updated to patch id = 0x0000004d success Setting up local apic... apic_id: 0 done. Clearing memory 1024K - 2097152K: ------------------------------- done CPU #0 Initialized start_eip=0x00010000 Initializing CPU #1 CPU: vendor AMD device 20f12 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 microcode: patch id that want to apply= 0x0000004d microcode: updated to patch id = 0x0000004d success Setting up local apic... apic_id: 1 done. CPU #1 Initialized start_eip=0x00010000 Initializing CPU #2 CPU: vendor AMD device 20f12 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 microcode: patch id that want to apply= 0x0000004d microcode: updated to patch id = 0x0000004d success Setting up local apic... apic_id: 2 done. Clearing memory 2097152K - 5242880K: ----------------++++++++++++++++ done CPU #2 Initialized start_eip=0x00010000 Initializing CPU #3 Waiting for 1 CPUS to stop CPU: vendor AMD device 20f12 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 microcode: patch id that want to apply= 0x0000004d microcode: updated to patch id = 0x0000004d success Setting up local apic... apic_id: 3 done. CPU #3 Initialized All AP CPUs stopped PCI: 00:18.0 init PCI: 01:01.0 init PCI: 02:09.0 init PCI: 02:09.1 init PCI: 01:03.0 init PCI: 04:05.0 init PCI: 04:06.0 init PCI: 01:04.0 init RTC Init Invalid CMOS LB checksum enabling HPET @0xfed00000 PNP: 002e.0 init PNP: 002e.2 init PNP: 002e.5 init PNP: 002e.b init PCI: 01:04.1 init IDE1 IDE0 PCI: 01:04.3 init set power on after power fail smbus: PCI: 01:04.3[0]->I2C: 01:2d init PCI: 00:18.1 init PCI: 00:18.2 init PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 00:19.0 init PCI: 00:19.1 init PCI: 00:19.2 init PCI: 00:19.3 init NB: Function 3 Misc Control.. done. Devices initialized Writing IRQ routing tables to 0xf0000...done. Wrote the mp table end at: 00000020 - 000001f4 Moving GDT to 0x500...ok Wrote linuxbios table at: 00000530 - 00000e10 checksum 54d5 Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 33:stream_init() - rom_stream: 0xfffc0000 - 0xfffdffff Found ELF candiate at offset 0 Loading Etherboot version: 5.4.1 Dropping non PT_LOAD segment New segment addr 0x10000 size 0x49180 offset 0x0 filesize 0x9c90 (cleaned up) New segment addr 0x10000 size 0x49180 offset 0x0 filesize 0x9c90 Loading Segment: addr: 0x00000000bff8c000 memsz: 0x0000000000034000 filesz: 0x0000000000009c90 Clearing Segment: addr: 0x00000000bff95c90 memsz: 0x000000000002a370 Loading Segment: addr: 0x0000000000044000 memsz: 0x0000000000015180 filesz: 0x0000000000000000 Clearing Segment: addr: 0x0000000000044000 memsz: 0x0000000000015180 Jumping to boot code at 0x100b0 CPU 2064 Mhz Etherboot 5.4.1 (GPL) http://etherboot.org Drivers: TG3 FILO Images: NBI ELF Protocols: DHCP TFTP Relocating _text from: [000101b0,00059180) to [bfeb7030,bff00000) Boot from (N)etwork (D)isk or (Q)uit? D Probing pci disk... [FILO]FILO version 0.4.1 (root@countzero.vandewege.net) Tue Jan 3 17:32:29 EST 2006 Press for default boot, or for boot prompt... 2 1 timed out boot: hde1:/vmlinuz-2.6.12-9-amd64-generic initrd=/initrd.img-2.6.12-9-amd64-generic ro root=/dev/md3 console=tty0 console=ttyS0,115200n8 hde: LBA48: WDC WD740GD-00FLC0 hdf: LBA48: WDC WD740GD-00FLC0 Mounted ext2fs Found Linux version 2.6.12-9-amd64-generic (buildd@king) #1 Mon Oct 10 13:27:39 BST 2005 bzImage. Loading kernel... ok Loading initrd... ok Jumping to entry point... [ 0.000000] Bootdata ok (command line is ro root=/dev/md3 console=tty0 console=ttyS0,115200n8) [ 0.000000] Linux version 2.6.12-9-amd64-generic (buildd@king) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Mon Oct 10 13:27:39 BST 2005 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000000e7c type 16 [ 0.000000] BIOS-e820: 0000000000000e7c - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 00000000000f0400 type 16 [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c0000000 (usable) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] ACPI: Unable to locate RSDP [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] OEM ID: TYAN <6>Product ID: S2881 <6>APIC at: 0xFEE00000 [ 0.000000] Processor #0 15:1 APIC version 16 [ 0.000000] Processor #1 15:1 APIC version 16 [ 0.000000] WARNING: NR_CPUS limit of 1 reached. Processor ignored. [ 0.000000] Processor #2 15:1 APIC version 16 [ 0.000000] WARNING: NR_CPUS limit of 1 reached. Processor ignored. [ 0.000000] Processor #3 15:1 APIC version 16 [ 0.000000] WARNING: NR_CPUS limit of 1 reached. Processor ignored. [ 0.000000] I/O APIC #4 Version 17 at 0xFEC00000. [ 0.000000] I/O APIC #5 Version 17 at 0xFD200000. [ 0.000000] I/O APIC #6 Version 17 at 0xFD201000. [ 0.000000] Setting APIC routing to flat [ 0.000000] Processors: 1 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:40000000) [ 0.000000] Checking aperture... [ 0.000000] CPU 0: aperture @ f8000000 size 64 MB [ 0.000000] CPU 1: aperture @ f8000000 size 64 MB [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: ro root=/dev/md3 console=tty0 console=ttyS0,115200n8 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 1.193182 MHz PIT timer. [ 0.000000] time.c: Detected 1991.567 MHz processor. [ 13.382487] time.c: Using PIT/TSC based timekeeping. [ 13.382927] Console: colour dummy device 80x25 [ 13.602936] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 13.618545] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 13.695497] Memory: 4101416k/5242880k available (1620k kernel code, 92332k reserved, 997k data, 136k init) [ 13.725327] Security Framework v1.0.0 initialized [ 13.730503] SELinux: Disabled at boot. [ 13.734726] Mount-cache hash table entries: 256 [ 13.739776] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 13.748068] CPU: L2 Cache: 1024K (64 bytes/line) [ 13.753397] CPU: stepping 02 [ 13.756953] checking if image is initramfs... it is [ 14.094094] Using IO-APIC 4 [ 14.097350] Using IO-APIC 5 [ 14.100593] Using IO-APIC 6 [ 14.113926] Using local APIC timer interrupts. [ 14.169306] Detected 12.447 MHz APIC timer. [ 14.174168] testing NMI watchdog ... OK. [ 14.188739] NET: Registered protocol family 16 [ 14.194273] PCI: Using configuration type 1 [ 14.199124] mtrr: v2.0 (20020519) [ 14.203233] ACPI: Subsystem revision 20050729 [ 14.208291] ACPI: Interpreter disabled. [ 14.212726] Linux Plug and Play Support v0.97 (c) Adam Belay [ 14.219295] pnp: PnP ACPI: disabled [ 14.223386] usbcore: registered new driver usbfs [ 14.228755] usbcore: registered new driver hub [ 14.233943] PCI: Probing PCI hardware [ 14.238176] PCI: Probing PCI hardware (bus 00) [ 14.244682] PCI: Discovered primary peer bus 01 [IRQ] [ 14.250557] PCI: Using IRQ router default [1022/7468] at 0000:01:04.0 [ 14.258038] PCI->APIC IRQ transform: 0000:01:04.2[D] -> IRQ 19 [ 14.264805] PCI->APIC IRQ transform: 0000:02:09.0[A] -> IRQ 24 [ 14.271568] PCI->APIC IRQ transform: 0000:02:09.1[B] -> IRQ 25 [ 14.278315] PCI->APIC IRQ transform: 0000:04:00.0[D] -> IRQ 19 [ 14.285099] PCI->APIC IRQ transform: 0000:04:00.1[D] -> IRQ 19 [ 14.291873] PCI->APIC IRQ transform: 0000:04:05.0[A] -> IRQ 17 [ 14.298639] PCI->APIC IRQ transform: 0000:04:06.0[A] -> IRQ 18 [ 14.305469] PCI-DMA: Disabling AGP. [ 14.309565] PCI-DMA: aperture base @ f8000000 size 65536 KB [ 14.316026] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 14.323800] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 14.332310] audit: initializing netlink socket (disabled) [ 14.338571] audit: initialized [ 14.342183] VFS: Disk quotas dquot_6.5.1 [ 14.346741] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 14.354242] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) [ 14.361388] devfs: boot_options: 0x0 [ 14.365554] Initializing Cryptographic API [ 14.370320] PCI: MSI quirk detected. pci_msi_quirk set. [ 14.376390] PCI: MSI quirk detected. pci_msi_quirk set. [ 14.396511] Linux agpgart interface v0.101 (c) Dave Jones [ 14.402839] PNP: No PS/2 controller found. Probing ports directly. [ 14.411607] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 14.417510] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 14.423273] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 14.432480] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 14.439569] io scheduler noop registered [ 14.444130] io scheduler anticipatory registered [ 14.449492] io scheduler deadline registered [ 14.454450] io scheduler cfq registered [ 14.459156] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 14.467995] NET: Registered protocol family 2 [ 14.482953] IP: routing cache hash table of 65536 buckets, 512Kbytes [ 14.490780] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [ 14.502485] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 14.510542] TCP: Hash tables configured (established 524288 bind 65536) [ 14.518280] NET: Registered protocol family 8 [ 14.523312] NET: Registered protocol family 20 [ 14.528620] Freeing unused kernel memory: 136k freed Loading, please wait... Begin: Loading modules ... [ 14.552088] input: AT Translated Set 2 keyboard on isa0060/serio0 [ 14.563428] Capability LSM initialized [ 14.576238] NET: Registered protocol family 1 [ 14.592822] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 14.600210] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 14.614405] AMD8111: IDE controller at PCI slot 0000:01:04.1 [ 14.620961] AMD8111: chipset revision 3 [ 14.625398] AMD8111: not 100% native mode: will probe irqs later [ 14.632349] AMD8111: 0000:01:04.1 (rev 03) UDMA133 controller [ 14.639007] ide0: BM-DMA at 0x2420-0x2427, BIOS settings: hda:pio, hdb:pio [ 14.647392] ide1: BM-DMA at 0x2428-0x242f, BIOS settings: hdc:pio, hdd:pio [ 15.787445] hdd: CD-224E, ATAPI CD/DVD-ROM drive [ 15.843814] ide1 at 0x170-0x177,0x376 on irq 15 [ 18.418214] hdd: ATAPI 24X CD-ROM drive, 128kB Cache [ 18.424029] Uniform CD-ROM driver Revision: 3.20 [ 18.679200] tg3.c:v3.31 (June 8, 2005) [ 18.687669] eth0: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:30:a5:24 [ 18.701222] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0] [ 18.710911] eth0: dma_rwctrl[769f4000] [ 18.725706] eth1: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:30:a5:25 [ 18.739240] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] [ 18.748945] eth1: dma_rwctrl[769f4000] [ 18.761726] ohci_hcd 0000:04:00.0: Advanced Micro Devices [AMD] AMD-8111 USB [ 18.770030] ohci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1 [ 18.778603] ohci_hcd 0000:04:00.0: irq 19, io mem 0xfd000000 [ 18.837669] hub 1-0:1.0: USB hub found [ 18.842018] hub 1-0:1.0: 3 ports detected [ 18.849623] ohci_hcd 0000:04:00.1: Advanced Micro Devices [AMD] AMD-8111 USB (#2) [ 18.858342] ohci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 2 [ 18.866917] ohci_hcd 0000:04:00.1: irq 19, io mem 0xfd001000 [ 18.925606] hub 2-0:1.0: USB hub found [ 18.929958] hub 2-0:1.0: 3 ports detected [ 18.947609] SCSI subsystem initialized [ 18.954053] ata1: SATA max UDMA/100 cmd 0xFFFFC20000014080 ctl 0xFFFFC2000001408A bmdma 0xFFFFC20000014000 irq 17 [ 18.965952] ata2: SATA max UDMA/100 cmd 0xFFFFC200000140C0 ctl 0xFFFFC200000140CA bmdma 0xFFFFC20000014008 irq 17 [ 18.977888] ata3: SATA max UDMA/100 cmd 0xFFFFC20000014280 ctl 0xFFFFC2000001428A bmdma 0xFFFFC20000014200 irq 17 [ 18.989796] ata4: SATA max UDMA/100 cmd 0xFFFFC200000142C0 ctl 0xFFFFC200000142CA bmdma 0xFFFFC20000014208 irq 17 [ 19.356748] ata1: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48 [ 19.365079] ata1: dev 0 configured for UDMA/100 [ 19.370326] scsi0 : sata_sil [ 19.728542] ata2: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48 [ 19.736868] ata2: dev 0 configured for UDMA/100 [ 19.742125] scsi1 : sata_sil [ 20.100343] ata3: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48 [ 20.108673] ata3: dev 0 configured for UDMA/100 [ 20.113919] scsi2 : sata_sil [ 20.472138] ata4: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48 [ 20.480443] ata4: dev 0 configured for UDMA/100 [ 20.485690] scsi3 : sata_sil [ 20.489092] Vendor: ATA Model: WDC WD740GD-00FL Rev: 33.0 [ 20.496427] Type: Direct-Access ANSI SCSI revision: 05 [ 20.505313] Vendor: ATA Model: WDC WD740GD-00FL Rev: 33.0 [ 20.512607] Type: Direct-Access ANSI SCSI revision: 05 [ 20.521467] Vendor: ATA Model: WDC WD740GD-00FL Rev: 33.0 [ 20.528815] Type: Direct-Access ANSI SCSI revision: 05 [ 20.537688] Vendor: ATA Model: WDC WD740GD-00FL Rev: 33.0 [ 20.544977] Type: Direct-Access ANSI SCSI revision: 05 [ 22.570354] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) [ 22.578060] SCSI device sda: drive cache: write back [ 22.583874] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB) [ 22.591514] SCSI device sda: drive cache: write back [ 22.597270] /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 [ 22.614922] Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 [ 22.622193] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) [ 22.629880] SCSI device sdb: drive cache: write back [ 22.635684] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB) [ 22.643346] SCSI device sdb: drive cache: write back [ 22.649102] /dev/scsi/host1/bus0/target0/lun0: p1 p2 p3 p4 [ 22.665362] Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 [ 22.672632] SCSI device sdc: 145226112 512-byte hdwr sectors (74356 MB) [ 22.680274] SCSI device sdc: drive cache: write back [ 22.686053] SCSI device sdc: 145226112 512-byte hdwr sectors (74356 MB) [ 22.693715] SCSI device sdc: drive cache: write back [ 22.699471] /dev/scsi/host2/bus0/target0/lun0: p1 p2 p3 p4 [ 22.717266] Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 [ 22.724550] SCSI device sdd: 145226112 512-byte hdwr sectors (74356 MB) [ 22.732228] SCSI device sdd: drive cache: write back [ 22.738015] SCSI device sdd: 145226112 512-byte hdwr sectors (74356 MB) [ 22.745679] SCSI device sdd: drive cache: write back [ 22.751417] /dev/scsi/host3/bus0/target0/lun0: p1 p2 p3 p4 [ 22.769228] Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0 Done. Begin: Initializing /dev ... Done. Begin: Running /scripts/init-premount ... FATAL: Error inserting fan (/lib/modules/2.6.12-9-amd64-generic/kernel/drivers/acpi/fan.ko): No such device FATAL: Error inserting thermal (/lib/modules/2.6.12-9-amd64-generic/kernel/drivers/acpi/thermal.ko): No such device Done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... [ 23.126611] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 23.136234] md: raid1 personality registered as nr 3 [ 23.152012] raid5: automatically using best checksumming function: generic_sse [ 23.165265] generic_sse: 6040.000 MB/sec [ 23.170211] raid5: using function: generic_sse (6040.000 MB/sec) [ 23.177911] md: raid5 personality registered as nr 4 [ 23.503175] devfs_mk_dev: could not append to parent for md/0 [ 23.511685] md: md0 stopped. [ 23.515982] md: bind [ 23.519240] md: bind [ 23.522491] md: bind [ 23.525746] md: bind [ 23.528967] raid1: raid set md0 active with 4 out of 4 mirrors mdadm: /dev/md0 has been started with 4 drives. [ 23.543059] devfs_mk_dev: could not append to parent for md/1 [ 23.551594] md: md1 stopped. [ 23.555871] md: bind [ 23.559153] md: bind [ 23.562397] md: bind [ 23.565675] md: bind [ 23.568817] raid5: device sda2 operational as raid disk 0 [ 23.575076] raid5: device sdd2 operational as raid disk 3 [ 23.581314] raid5: device sdc2 operational as raid disk 2 [ 23.587560] raid5: device sdb2 operational as raid disk 1 [ 23.594243] raid5: allocated 4270kB for md1 [ 23.599081] raid5: raid level 5 set md1 active with 4 out of 4 devices, algorithm 2 [ 23.607952] RAID5 conf printout: [ 23.611689] --- rd:4 wd:4 fd:0 [ 23.615320] disk 0, o:1, dev:sda2 [ 23.619244] disk 1, o:1, dev:sdb2 [ 23.623168] disk 2, o:1, dev:sdc2 [ 23.627127] disk 3, o:1, dev:sdd2 mdadm: /dev/md1 has been started with 4 drives. [ 23.642617] devfs_mk_dev: could not append to parent for md/2 [ 23.651168] md: md2 stopped. [ 23.655459] md: bind [ 23.658725] md: bind [ 23.661974] md: bind [ 23.665248] md: bind [ 23.668406] raid5: device sda3 operational as raid disk 0 [ 23.674639] raid5: device sdd3 operational as raid disk 3 [ 23.680917] raid5: device sdc3 operational as raid disk 2 [ 23.687201] raid5: device sdb3 operational as raid disk 1 [ 23.693862] raid5: allocated 4270kB for md2 [ 23.698703] raid5: raid level 5 set md2 active with 4 out of 4 devices, algorithm 2 [ 23.707572] RAID5 conf printout: [ 23.711314] --- rd:4 wd:4 fd:0 [ 23.714961] disk 0, o:1, dev:sda3 [ 23.718893] disk 1, o:1, dev:sdb3 [ 23.722817] disk 2, o:1, dev:sdc3 [ 23.726741] disk 3, o:1, dev:sdd3 mdadm: /dev/md2 has been started with 4 drives. [ 23.746129] devfs_mk_dev: could not append to parent for md/3 [ 23.754702] md: md3 stopped. [ 23.758992] md: bind [ 23.762253] md: bind [ 23.765497] md: bind [ 23.768768] md: bind [ 23.771904] md: md3: raid array is not clean -- starting background reconstruction [ 23.780703] raid5: device sda4 operational as raid disk 0 [ 23.786935] raid5: device sdd4 operational as raid disk 3 [ 23.793198] raid5: device sdc4 operational as raid disk 2 [ 23.799451] raid5: device sdb4 operational as raid disk 1 [ 23.806115] raid5: allocated 4270kB for md3 [ 23.810973] raid5: raid level 5 set md3 active with 4 out of 4 devices, algorithm 2 [ 23.819860] RAID5 conf printout: [ 23.823599] --- rd:4 wd:4 fd:0 [ 23.827238] disk 0, o:1, dev:sda4 [ 23.831179] disk 1, o:1, dev:sdb4 [ 23.835121] disk 2, o:1, dev:sdc4 [ 23.839074] disk 3, o:1, dev:sdd4 [ 23.843036] ....<6>md: syncing RAID array md3 [ 23.848123] md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc. [ 23.856300] md: using maximum available idle IO bandwith (but not more than 200000 KB/sec) for reconstruction. [ 23.867911] md: using 128k window, over a total of 67657664 blocks. mdadm: /dev/md3 has been started with 4 drives. Done. Begin: Running /scripts/local-premount ..[ 23.902163] Attempting manual resume . [ 23.910134] swsusp: Suspend partition has wrong signature? Done. LinuxBIOS-1.1.8_s2881_Fallback Tue Jan 3 17:36:16 EST 2006 starting... (0,1) link=00 (1,0) link=00 02 nodes initialized. core0: --- { APICID = 02 NODEID = 01 COREID = 00} --- SBLink=02 NC node|link=02