Hi everyone,<div><br></div><div>I just finished porting Coreboot v4 to the PC Engines Alix.2d3 board (<a href="http://www.pcengines.ch/alix2d3.htm">http://www.pcengines.ch/alix2d3.htm</a>), using the sources for alix.2c3 from coreboot-v3 and alix.1c from coreboot-v4.</div>

<div>It boots Linux correctly using the FILO payload.</div><div>So far everything&#39;s okay.</div><div><br></div><div>For reviews, I attached a patch which should be applied against the current coreboot [r5738] trunk. Please tell me what you think.</div>

<div><br></div><div>Known issue with Voyage Linux 0.6 (<a href="http://linux.voyage.hk/">http://linux.voyage.hk/</a>): The front LEDs won&#39;t work out of the box. That&#39;s because the Voyage Linux kernel (2.6.26) uses a hard-coded GPIO address, instead of looking at the right one on the PCI bus. Please update this particular driver to a more recent (and correct) version and you should be ok.</div>

<div><br></div><div>Board support information for the wiki:</div><div><br></div><div>Vendor: PC Engines</div><div>Mainboard: ALIX.2D3</div><div>Northbridge: AMD Geode LX</div><div>Southbridge: AMD Geode CS5536</div><div>
Super I/O: -</div>
<div>CPU: AMD Geode LX</div><div>Socket: -</div><div>Status: OK</div><div>ROM Chip Package: TSOP</div><div>ROM Chip Protocol: LPC</div><div>ROM Chip Socketed: N</div><div>Supported by flashrom: Y</div><div>VCS: 4</div><div>

<br></div><div>Best regards,</div><div><div>-- <br>Aurélien Guillaume<br><br>
</div></div>