Hi everyone,
I just finished porting Coreboot v4 to the PC Engines Alix.2d3 board ( http://www.pcengines.ch/alix2d3.htm), using the sources for alix.2c3 from coreboot-v3 and alix.1c from coreboot-v4. It boots Linux correctly using the FILO payload. So far everything's okay.
For reviews, I attached a patch which should be applied against the current coreboot [r5738] trunk. Please tell me what you think.
Known issue with Voyage Linux 0.6 (http://linux.voyage.hk/): The front LEDs won't work out of the box. That's because the Voyage Linux kernel (2.6.26) uses a hard-coded GPIO address, instead of looking at the right one on the PCI bus. Please update this particular driver to a more recent (and correct) version and you should be ok.
Board support information for the wiki:
Vendor: PC Engines Mainboard: ALIX.2D3 Northbridge: AMD Geode LX Southbridge: AMD Geode CS5536 Super I/O: - CPU: AMD Geode LX Socket: - Status: OK ROM Chip Package: TSOP ROM Chip Protocol: LPC ROM Chip Socketed: N Supported by flashrom: Y VCS: 4
Best regards,