I have got two cpus and four dimms for every CPU.
YH
From:David Aubin [mailto:daubin@actuality-systems.com]
Sent: Friday, July 09, 2004 12:07 PM
To: YhLu
Cc: Hendricks David W.; ron minnich; LinuxBIOS
Subject: RE: Filo Error Help
Hi,
Yes, I did, but I don't have a DHCP environment so it kept searching at the DHCP phase.
This problem is odd. I can boot my elf fine with etherboot, but not with filo. I can boot
my kernel fine with filo, but not the initrd. I can even boot your kernel of the ram.elf you
sent me, but when it hits the initrd it fails with the same error as mine.
I suspect either my filo is not configured like yours or that there is a problem loading a
mulitpart elf (kernel & initrd in filo). I'm confused as to why filo didn't just use the etherboot
portion of elf_load. It could be you were on the, "bleeding" edge?
Can you tell me how much memory you have in your working system? I have just
one cpu and 512meg memory. Curious if loading it high & it runs out of memory or
something like that.
Thanks,
Dave
On Fri, 2004-07-09 at 13:05, YhLu wrote:
Did you try the tg3--filo.zelf I sent to you?
YH