Even I tried flashing with IFWI .bin file released by Intel, the board
still doesn't boot.
Hi,
On 03/29/2017 06:48 PM, Toan Le manh wrote:
@Andrey: The flashing is OK, but the board doesn't boot anything. The
POST CODE is always "0".
Even I tried flashing with IFWI .bin file released by Intel, the board
still doesn't boot.
Where can I select "Use IFWI stitching"?
make nconfig, select board, there will be option to "use IFWI stitching". Then you will need to provide path to the ifwi file.
Best
Andrey