Hi, I'm trying to make live again an old thin client based on ASI_MB-5BLMP motherboard. The original BIOS is blocked and I can't use it as is, so I thought to use coreboot and FILO, following the instructions found in "How to build". I retrived an old pc, installed Lubuntu and all packets listed in coreboot instructions: gcc / g++, make, ncurses-dev (when installed, a note from apt-get said that was selected libncurses5-dev), doxygen, iasl, gdb, flex and bison, used git for coreboot and FILO and, following instructions, tried to build libpayload. When I run "make menuconfig", I can set options and write them to . config, obtaining the following output: (‘comando non trovato’ means ‘command not found’)
michele@pcscratch01:~/coreboot/payloads/libpayload$ sudo make menuconfig [sudo] password for michele: /bin/sh: -print-libgcc-file-name: comando non trovato /bin/sh: -print-libgcc-file-name: comando non trovato # # configuration written to .config #
*** End of libpayload configuration. *** Execute 'make' to build or try 'make help'.
When I try to run "make install" (or "make"), the output is:
michele@pcscratch01:~/coreboot/payloads/libpayload$ sudo make install /bin/sh: -print-libgcc-file-name: comando non trovato /bin/sh: -print-libgcc-file-name: comando non trovato build/libpayload-config.h build/config.h differenza: byte 92, riga 4 CC libpci/libpci.libpci.o make: MMD: comando non trovato AR build/libpci.a make: rc: comando non trovato make: *** [build/libpci.a] Errore 127
And here I stopped.
I googled to find some indication, and all I could find is to delete sh link and recreate it pointing to /bin/bash.
I'm not expert in Linux world, nor in programming, and I discovered coreboot just because I'm looking for a new BIOS for my motherboard, so I really need for a little help.
Thanks in advice for every suggestion you could give to me.
Regards
Michele Montani