coreboot-2.0.0_RM4100 Mon Jan 28 10:54:10 EST 2008 starting... Setting initial registers.... Initial registers have been set. No DIMM found in slot 00 DRB 0x60 has been set to 0x00 DRB1 0x61 has been set to 0x00 Found DIMM in slot 01 DIMM is 0x0080 on side 1 DIMM is 0x0000 on side 2 DRB2 0x62 has been set to 0x04 DRB3 0x63 has been set to 0x04 No DIMM found in slot 00, setting DRA to 0xFF DRA 0x70 has been set to 0xff Found DIMM in slot 01, setting DRA... DRA 0x71 has been set to 0xf1 RAM Enable 1: Apply NOP Sending RAM command 0x00000010 to 0x00000000 RAM Enable 2: Precharge all Sending RAM command 0x00000020 to 0x00000000 RAM Enable 3: CBR Sending RAM command 0x00000060 to 0x00000000 Sending RAM command 0x00000060 to 0x00000000 Sending RAM command 0x00000060 to 0x00000000 Sending RAM command 0x00000060 to 0x00000000 Sending RAM command 0x00000060 to 0x00000000 Sending RAM command 0x00000060 to 0x00000000 Sending RAM command 0x00000060 to 0x00000000 Sending RAM command 0x00000060 to 0x00000000 RAM Enable 4: Mode register set Sending RAM command 0x00000030 to 0x000001d0 RAM Enable 5: Normal operation Sending RAM command 0x20000270 to 0x00000000 Northbridge following SDRAM init: PCI: 00:00.00 00: 86 80 75 35 06 00 10 00 04 00 00 06 00 00 00 00 10: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 40: 09 00 05 01 00 00 00 00 00 00 00 00 02 28 00 0e 50: 72 a0 02 00 00 00 00 00 00 30 33 33 33 33 33 33 60: 00 00 04 04 04 04 00 00 00 00 00 00 00 00 00 00 70: ff f1 ff ff 00 00 00 00 10 00 00 00 70 02 00 20 80: 00 00 00 00 00 00 00 00 20 60 d6 6f 00 00 00 00 90: 02 38 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 02 00 20 00 17 02 00 1f 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 54 0e 41 a2 99 01 00 c0 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 1b 49 9b fc f0: 11 11 01 00 00 00 0c 05 3f d2 30 d1 1f cf 24 cd Copying coreboot to RAM. Jumping to coreboot. coreboot-2.0.0_RM4100 Mon Jan 28 11:45:45 EST 2008 booting... end 6a51cf7d, start 0 32-bit delta 1502 calibrate_tsc 32-bit result is 1502 clocks_per_usec: 1502 Enumerating buses... scan_static_bus for Root Device Finding PCI configuration type. PCI: Using configuration type 1 PCI_DOMAIN: 0000 enabled APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 scanning... PCI: pci_scan_bus for bus 00 PCI: 00:00.0 [8086/3575] ops PCI: 00:00.0 [8086/3575] enabled PCI: devfn 0x8, bad id 0xffffffff PCI: 00:02.0 [8086/3577] enabled PCI: devfn 0x18, bad id 0xffffffff PCI: devfn 0x20, bad id 0xffffffff PCI: devfn 0x28, bad id 0xffffffff PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: devfn 0x48, bad id 0xffffffff PCI: devfn 0x50, bad id 0xffffffff PCI: devfn 0x58, bad id 0xffffffff PCI: devfn 0x60, bad id 0xffffffff PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff PCI: devfn 0x78, bad id 0xffffffff PCI: devfn 0x80, bad id 0xffffffff PCI: devfn 0x88, bad id 0xffffffff PCI: devfn 0x90, bad id 0xffffffff PCI: devfn 0x98, bad id 0xffffffff PCI: devfn 0xa0, bad id 0xffffffff PCI: devfn 0xa8, bad id 0xffffffff PCI: devfn 0xb0, bad id 0xffffffff PCI: devfn 0xb8, bad id 0xffffffff PCI: devfn 0xc0, bad id 0xffffffff PCI: devfn 0xc8, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: 00:1d.0 [8086/24c2] ops PCI: 00:1d.0 [8086/24c2] enabled PCI: 00:1d.1 [8086/24c4] ops PCI: 00:1d.1 [8086/24c4] enabled PCI: 00:1d.2 [8086/24c7] ops PCI: 00:1d.2 [8086/24c7] enabled PCI: devfn 0xeb, bad id 0xffffffff PCI: devfn 0xec, bad id 0xffffffff PCI: devfn 0xed, bad id 0xffffffff PCI: devfn 0xee, bad id 0xffffffff PCI: 00:1d.7 [8086/24cd] ops PCI: 00:1d.7 [8086/24cd] enabled PCI: 00:1e.0 [8086/244e] bus ops PCI: 00:1e.0 [8086/244e] enabled PCI: 00:1f.0 [8086/24c0] bus ops PCI: 00:1f.0 [8086/24c0] enabled PCI: 00:1f.1 [8086/24cb] ops PCI: 00:1f.1 [8086/24cb] enabled PCI: devfn 0xfa, bad id 0xffffffff PCI: 00:1f.3 [8086/24c3] enabled PCI: devfn 0xfc, bad id 0xffffffff PCI: 00:1f.5 [8086/24c5] ops PCI: 00:1f.5 [8086/24c5] enabled PCI: 00:1f.6 [8086/24c6] ops PCI: 00:1f.6 [8086/24c6] enabled PCI: devfn 0xff, bad id 0xffffffff do_pci_scan_bridge for PCI: 00:1e.0 PCI: pci_scan_bus for bus 01 PCI: devfn 0x0, bad id 0xffffffff PCI: devfn 0x8, bad id 0xffffffff PCI: devfn 0x10, bad id 0xffffffff PCI: devfn 0x18, bad id 0xffffffff PCI: devfn 0x20, bad id 0xffffffff PCI: devfn 0x28, bad id 0xffffffff PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: devfn 0x48, bad id 0xffffffff PCI: devfn 0x50, bad id 0xffffffff PCI: devfn 0x58, bad id 0xffffffff PCI: devfn 0x60, bad id 0xffffffff PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff PCI: devfn 0x78, bad id 0xffffffff PCI: devfn 0x80, bad id 0xffffffff PCI: devfn 0x88, bad id 0xffffffff PCI: devfn 0x90, bad id 0xffffffff PCI: devfn 0x98, bad id 0xffffffff PCI: devfn 0xa0, bad id 0xffffffff PCI: devfn 0xa8, bad id 0xffffffff PCI: devfn 0xb0, bad id 0xffffffff PCI: devfn 0xb8, bad id 0xffffffff PCI: devfn 0xc0, bad id 0xffffffff PCI: devfn 0xc8, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: devfn 0xe8, bad id 0xffffffff PCI: devfn 0xf0, bad id 0xffffffff PCI: devfn 0xf8, bad id 0xffffffff PCI: pci_scan_bus returning with max=001 do_pci_scan_bridge returns max 1 scan_static_bus for PCI: 00:1f.0 Found SMSC Super I/O (ID=0x60, rev=0x01) PNP: 002e.0 disabled PNP: 002e.3 disabled PNP: 002e.4 enabled PNP: 002e.5 disabled PNP: 002e.7 enabled PNP: 002e.9 disabled PNP: 002e.a enabled PNP: 002e.b disabled scan_static_bus for PCI: 00:1f.0 done PCI: pci_scan_bus returning with max=001 scan_static_bus for Root Device done done Allocating resources... Reading resources... Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0 Root Device read_resources bus 0 link: 0 PCI_DOMAIN: 0000 read_resources bus 0 link: 0 PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:1e.0 compute_allocate_io: base: 00000000 size: 00000000 align: 12 gran: 12 PCI: 00:1e.0 read_resources bus 1 link: 0 PCI: 00:1e.0 read_resources bus 1 link: 0 done PCI: 00:1e.0 compute_allocate_io: base: 00000000 size: 00000000 align: 12 gran: 12 done PCI: 00:1e.0 compute_allocate_io: base: 0000f000 size: 00000000 align: 12 gran: 12 PCI: 00:1e.0 read_resources bus 1 link: 0 PCI: 00:1e.0 read_resources bus 1 link: 0 done PCI: 00:1e.0 compute_allocate_io: base: 0000f000 size: 00000000 align: 12 gran: 12 done PCI: 00:1e.0 1c <- [0x000000f000 - 0x000000efff] size 0x00000000 gran 0x0c bus 01 io PCI: 00:1e.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:1e.0 read_resources bus 1 link: 0 PCI: 00:1e.0 read_resources bus 1 link: 0 done PCI: 00:1e.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20 gran: 20 done PCI: 00:1e.0 compute_allocate_prefmem: base: fff00000 size: 00000000 align: 20 gran: 20 PCI: 00:1e.0 read_resources bus 1 link: 0 PCI: 00:1e.0 read_resources bus 1 link: 0 done PCI: 00:1e.0 compute_allocate_prefmem: base: fff00000 size: 00000000 align: 20 gran: 20 done PCI: 00:1e.0 24 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 01 prefmem PCI: 00:1e.0 compute_allocate_mem: base: 00000000 size: 00000000 align: 20 gran: 20 PCI: 00:1e.0 read_resources bus 1 link: 0 PCI: 00:1e.0 read_resources bus 1 link: 0 done PCI: 00:1e.0 compute_allocate_mem: base: 00000000 size: 00000000 align: 20 gran: 20 done PCI: 00:1e.0 compute_allocate_mem: base: fff00000 size: 00000000 align: 20 gran: 20 PCI: 00:1e.0 read_resources bus 1 link: 0 PCI: 00:1e.0 read_resources bus 1 link: 0 done PCI: 00:1e.0 compute_allocate_mem: base: fff00000 size: 00000000 align: 20 gran: 20 done PCI: 00:1e.0 20 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 01 mem PCI: 00:1f.0 read_resources bus 0 link: 0 PCI: 00:1f.0 read_resources bus 0 link: 0 done PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done Root Device read_resources bus 0 link: 0 done PCI: 00:1f.5 10 * [0x00000400 - 0x000004ff] io PCI: 00:1f.6 10 * [0x00000800 - 0x000008ff] io PCI: 00:1f.6 14 * [0x00000c00 - 0x00000c7f] io PCI: 00:1f.5 14 * [0x00000c80 - 0x00000cbf] io PCI: 00:1d.0 20 * [0x00000cc0 - 0x00000cdf] io PCI: 00:1d.1 20 * [0x00000ce0 - 0x00000cff] io PCI: 00:1d.2 20 * [0x00001000 - 0x0000101f] io PCI: 00:1f.3 20 * [0x00001020 - 0x0000103f] io PCI: 00:1f.1 20 * [0x00001040 - 0x0000104f] io PCI: 00:1f.1 10 * [0x00001050 - 0x00001057] io PCI: 00:1f.1 18 * [0x00001060 - 0x00001067] io PCI: 00:1f.1 14 * [0x00001070 - 0x00001073] io PCI: 00:1f.1 1c * [0x00001080 - 0x00001083] io Root Device compute_allocate_io: base: 00001084 size: 00000c84 align: 8 gran: 0 done Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:02.0 10 * [0x00000000 - 0x07ffffff] prefmem PCI: 00:02.0 14 * [0x08000000 - 0x0807ffff] mem PCI: 00:1d.7 10 * [0x08080000 - 0x080803ff] mem PCI: 00:1f.1 24 * [0x08081000 - 0x080813ff] mem PCI: 00:1f.5 18 * [0x08082000 - 0x080821ff] mem PCI: 00:1f.5 1c * [0x08083000 - 0x080830ff] mem Root Device compute_allocate_mem: base: 08083100 size: 08083100 align: 27 gran: 0 done Done reading resources. Setting resources... Root Device compute_allocate_io: base: 00001000 size: 00000c84 align: 8 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:1f.5 10 * [0x00001000 - 0x000010ff] io PCI: 00:1f.6 10 * [0x00001400 - 0x000014ff] io PCI: 00:1f.6 14 * [0x00001800 - 0x0000187f] io PCI: 00:1f.5 14 * [0x00001880 - 0x000018bf] io PCI: 00:1d.0 20 * [0x000018c0 - 0x000018df] io PCI: 00:1d.1 20 * [0x000018e0 - 0x000018ff] io PCI: 00:1d.2 20 * [0x00001c00 - 0x00001c1f] io PCI: 00:1f.3 20 * [0x00001c20 - 0x00001c3f] io PCI: 00:1f.1 20 * [0x00001c40 - 0x00001c4f] io PCI: 00:1f.1 10 * [0x00001c50 - 0x00001c57] io PCI: 00:1f.1 18 * [0x00001c60 - 0x00001c67] io PCI: 00:1f.1 14 * [0x00001c70 - 0x00001c73] io PCI: 00:1f.1 1c * [0x00001c80 - 0x00001c83] io Root Device compute_allocate_io: base: 00001c84 size: 00000c84 align: 8 gran: 0 done Root Device compute_allocate_mem: base: f0000000 size: 08083100 align: 27 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:02.0 10 * [0xf0000000 - 0xf7ffffff] prefmem PCI: 00:02.0 14 * [0xf8000000 - 0xf807ffff] mem PCI: 00:1d.7 10 * [0xf8080000 - 0xf80803ff] mem PCI: 00:1f.1 24 * [0xf8081000 - 0xf80813ff] mem PCI: 00:1f.5 18 * [0xf8082000 - 0xf80821ff] mem PCI: 00:1f.5 1c * [0xf8083000 - 0xf80830ff] mem Root Device compute_allocate_mem: base: f8083100 size: 08083100 align: 27 gran: 0 done Root Device assign_resources, bus 0 link: 0 Setting RAM size to 131072 PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 PCI: 00:02.0 10 <- [0x00f0000000 - 0x00f7ffffff] size 0x08000000 gran 0x1b prefmem PCI: 00:02.0 14 <- [0x00f8000000 - 0x00f807ffff] size 0x00080000 gran 0x13 mem PCI: 00:1d.0 20 <- [0x00000018c0 - 0x00000018df] size 0x00000020 gran 0x05 io PCI: 00:1d.1 20 <- [0x00000018e0 - 0x00000018ff] size 0x00000020 gran 0x05 io PCI: 00:1d.2 20 <- [0x0000001c00 - 0x0000001c1f] size 0x00000020 gran 0x05 io PCI: 00:1d.7 10 <- [0x00f8080000 - 0x00f80803ff] size 0x00000400 gran 0x0a mem PCI: 00:1f.0 assign_resources, bus 0 link: 0 PNP: 002e.4 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io PNP: 002e.4 70 <- [0x0000000003 - 0x0000000003] size 0x00000001 gran 0x00 irq PNP: 002e.7 60 <- [0x0000000060 - 0x0000000060] size 0x00000001 gran 0x00 io PNP: 002e.7 62 <- [0x0000000064 - 0x0000000064] size 0x00000001 gran 0x00 io PNP: 002e.7 70 <- [0x0000000001 - 0x0000000001] size 0x00000001 gran 0x00 irq PNP: 002e.7 72 <- [0x000000000c - 0x000000000c] size 0x00000001 gran 0x00 irq PNP: 002e.a 60 <- [0x0000000a00 - 0x00000009ff] size 0x00000000 gran 0x00 io PCI: 00:1f.0 assign_resources, bus 0 link: 0 PCI: 00:1f.1 10 <- [0x0000001c50 - 0x0000001c57] size 0x00000008 gran 0x03 io PCI: 00:1f.1 14 <- [0x0000001c70 - 0x0000001c73] size 0x00000004 gran 0x02 io PCI: 00:1f.1 18 <- [0x0000001c60 - 0x0000001c67] size 0x00000008 gran 0x03 io PCI: 00:1f.1 1c <- [0x0000001c80 - 0x0000001c83] size 0x00000004 gran 0x02 io PCI: 00:1f.1 20 <- [0x0000001c40 - 0x0000001c4f] size 0x00000010 gran 0x04 io PCI: 00:1f.1 24 <- [0x00f8081000 - 0x00f80813ff] size 0x00000400 gran 0x0a mem PCI: 00:1f.3 20 <- [0x0000001c20 - 0x0000001c3f] size 0x00000020 gran 0x05 io PCI: 00:1f.5 10 <- [0x0000001000 - 0x00000010ff] size 0x00000100 gran 0x08 io PCI: 00:1f.5 14 <- [0x0000001880 - 0x00000018bf] size 0x00000040 gran 0x06 io PCI: 00:1f.5 18 <- [0x00f8082000 - 0x00f80821ff] size 0x00000200 gran 0x09 mem PCI: 00:1f.5 1c <- [0x00f8083000 - 0x00f80830ff] size 0x00000100 gran 0x08 mem PCI: 00:1f.6 10 <- [0x0000001400 - 0x00000014ff] size 0x00000100 gran 0x08 io PCI: 00:1f.6 14 <- [0x0000001800 - 0x000000187f] size 0x00000080 gran 0x07 io PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 Root Device assign_resources, bus 0 link: 0 Done setting resources. Done allocating resources. Enabling resources... PCI: 00:00.0 cmd <- 06 PCI: 00:02.0 subsystem <- 00/00 PCI: 00:02.0 cmd <- 02 PCI: 00:1d.0 cmd <- 01 PCI: 00:1d.1 cmd <- 01 PCI: 00:1d.2 cmd <- 01 PCI: 00:1d.7 subsystem <- 00/00 PCI: 00:1d.7 cmd <- 02 PCI: 00:1e.0 bridge ctrl <- 0003 PCI: 00:1e.0 cmd <- 01 PCI: 00:1f.0 cmd <- 0f PCI: 00:1f.1 cmd <- 03 PCI: 00:1f.3 subsystem <- 00/00 PCI: 00:1f.3 cmd <- 01 PCI: 00:1f.5 cmd <- 03 PCI: 00:1f.6 cmd <- 01 done. Initializing devices... Root Device init PCI: 00:00.0 init Northbridge init PCI: 00:02.0 init PCI: 00:1d.0 init PCI: 00:1d.1 init PCI: 00:1d.2 init PCI: 00:1d.7 init EHCI: Setting up controller.. done. PCI: 00:1e.0 init PCI: 00:1f.0 init IOAPIC Southbridge enabled 2186 Southbridge APIC ID = 2000000 Set power on if power fails RTC Init PNP: 002e.4 init PNP: 002e.7 init Keyboard init... PNP: 002e.a init PCI: 00:1f.1 init IDE0 IDE1 PCI: 00:1f.3 init APIC_CLUSTER: 0 init malloc Enter, size 668, free_mem_ptr 0001a000 malloc 0x0001a000 Initializing CPU #0 CPU: vendor Intel device 6b4 CPU: family 06, model 0b, stepping 04 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB DONE fixed MTRRs call enable_fixed_mtrr() Setting variable MTRR 0, base: 0MB, range: 128MB, type WB ADDRESS_MASK_HIGH=0xf DONE variable MTRRs Clear out the extra MTRR's call enable_var_mtrr() Leave x86_setup_var_mtrrs MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode_info: sig = 0x000006b4 pf=0x00000020 rev = 0x00000000 Disabling local apic...done. CPU #0 Initialized Devices initialized Copying IRQ routing tables to 0xf0000...done. Verifing copy of IRQ routing tables at 0xf0000...done Checking IRQ routing table consistency... check_pirq_routing_table() - irq_routing_table located at: 0x000f0000 done. Moving GDT to 0x500...ok Adjust low_table_end from 0x00000530 to 0x00001000 Adjust rom_table_end from 0x000f0400 to 0x00100000 Wrote coreboot table at: 00000530 - 000006e4 checksum 36df Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 rom_stream: 0xfff80000 - 0xfffdffff Found ELF candidate at offset 0 header_offset is 0 Try to load at offset 0x0 malloc Enter, size 32, free_mem_ptr 0001a29c malloc 0x0001a29c New segment addr 0x100000 size 0x3ce80 offset 0xc0 filesize 0x12e68 (cleaned up) New segment addr 0x100000 size 0x3ce80 offset 0xc0 filesize 0x12e68 lb: [0x0000000000004000, 0x000000000001e000) malloc Enter, size 32, free_mem_ptr 0001a2bc malloc 0x0001a2bc New segment addr 0x13ce80 size 0x48 offset 0x12f40 filesize 0x48 (cleaned up) New segment addr 0x13ce80 size 0x48 offset 0x12f40 filesize 0x48 lb: [0x0000000000004000, 0x000000000001e000) Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x0000000000100000 memsz: 0x000000000003ce80 filesz: 0x0000000000012e68 [ 0x0000000000100000, 0000000000112e68, 0x000000000013ce80) <- 00000000000000c0 Clearing Segment: addr: 0x0000000000112e68 memsz: 0x000000000002a018 Loading Segment: addr: 0x000000000013ce80 memsz: 0x0000000000000048 filesz: 0x0000000000000048 [ 0x000000000013ce80, 000000000013cec8, 0x000000000013cec8) <- 0000000000012f40 Loaded segments verified segments closed down stream Jumping to boot code at 0x10e61c entry = 0x0010e61c lb_start = 0x00004000 lb_size = 0x0001a000 adjust = 0x07fe2000 buffer = 0x07fcc000 elf_boot_notes = 0x000140c0 adjusted_boot_notes = 0x07ff60c0 FILO version 0.5 (joe@localhost.localdomain) Mon Jan 28 11:44:57 EST 2008 menu: hdc1:/grub/grub.conf hdc: LBA 41GB: Maxtor 2F040J0 Mounted ext2fs Press any key to continue. Press any key to continue. Press any key to continue.  FILO 0.5 +-------------------------------------------------------------------------+||||||||||||||||||||||||+-------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, 'a' to modify the kernel arguments before booting, or 'c' for a command-line.  Fedora (2.6.23.12-52.fc7)  Fedora Console (2.6.23.12-52.fc7)            The highlighted entry will be booted automatically in 20 seconds. The highlighted entry will be booted automatically in 19 seconds.   Fedora (2.6.23.12-52.fc7)  Fedora Console (2.6.23.12-52.fc7)  Booting 'Fedora Console (2.6.23.12-52.fc7)' root (hd2,0) kernel /vmlinuz-2.6.23.12-52.fc7 ro root=LABEL=/ console=tty0 console=ttyS0,115 200n8 initrd /initrd-2.6.23.12-52.fc7.img  Booting 'hdc1:/vmlinuz-2.6.23.12-52.fc7 ro root=LABEL=/ console=tty0 console=tt yS0,115200n8 initrd=/initrd-2.6.23.12-52.fc7.img' Found Linux version 2.6.23.12-52.fc7 (mockbuild@xenbuilder4.fedora.phx.redhat.com) #1 SMP Tue Dec 18 21:18:02 EST 2007 bzImage. Loading kernel... ok Loading initrd... ok Jumping to entry point... Linux version 2.6.23.12-52.fc7 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Tue Dec 18 21:18:02 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 0000000008000000 (usable) 0MB HIGHMEM available. 128MB LOWMEM available. Using x86 segment limits to approximate NX protection Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 32768 HighMem 32768 -> 32768 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 32768 DMI not present or invalid. Using APIC driver default ACPI: no DMI BIOS year, acpi=force is required to enable ACPI ACPI: Disabling ACPI support Allocating PCI resources starting at 10000000 (gap: 08000000:f8000000) swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 32512 Kernel command line: ro root=LABEL=/ console=tty0 console=ttyS0,115200n8 Local APIC disabled by BIOS -- you can enable it with "lapic" Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07a5000 soft=c0785000 PID hash table entries: 512 (order: 9, 2048 bytes) Detected 733.160 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled console [ttyS0] enabled Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 122192k/131072k available (2175k kernel code, 8336k reserved, 1113k data, 280k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xc8800000 - 0xff7fe000 ( 879 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) .init : 0xc073c000 - 0xc0782000 ( 280 kB) .data : 0xc061ff85 - 0xc0736544 (1113 kB) .text : 0xc0400000 - 0xc061ff85 (2175 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 1467.20 BogoMIPS (lpj=733603) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed CPU0: Intel Mobile Intel(R) Celeron(TM) CPU 733MHz stepping 04 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs Booting paravirtualized kernel on bare hardware Time: 32:00:08 Date: 80/00/10 NET: Registered protocol family 16 ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread C1126000 could not acquire Mutex [1] [20070126] No dock devices found. PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware * The chipset may have PM-Timer Bug. Due to workarounds for a bug, * this clock source is slow. If you are sure your timer does not have * this bug, please use "acpi_pm_good" to disable the workaround PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/24c0] at 0000:00:1f.0 PCI: Found IRQ 3 for device 0000:00:02.0 PCI: Sharing IRQ 3 with 0000:00:1d.0 PCI: Sharing IRQ 3 with 0000:00:1f.1 PCI: Found IRQ 5 for device 0000:00:1d.1 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.5 PCI: Sharing IRQ 5 with 0000:00:1f.6 PCI: Found IRQ 6 for device 0000:00:1d.2 PCI: Found IRQ 7 for device 0000:00:1d.7 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 49152 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2807k freed apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1470902407.954:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) ksign: Installing public key data Loading keyring - Added public key 35DAFEBDB3A62F88 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 agpgart: Detected an Intel 830M Chipset. agpgart: No pre-allocated video memory detected. agpgart: AGP aperture is 128M @ 0xf0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled �serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A PCI: Found IRQ 5 for device 0000:00:1f.6 PCI: Sharing IRQ 5 with 0000:00:1d.1 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.5 RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 6:820:67 Freeing unused kernel memory: 280k freed Write protecting the kernel read-only data: 844k Red Hat nash version 6.0.9 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Loading uhci-hcd.kUSB Universal Host Controller Interface driver v3.0 PCI: Found IRQ 3 for device 0000:00:1d.0 PCI: Sharing IRQ 3 with 0000:00:02.0 PCI: Sharing IRQ 3 with 0000:00:1f.1 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 3, io base 0x000018c0 o module usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Found IRQ 5 for device 0000:00:1d.1 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.5 PCI: Sharing IRQ 5 with 0000:00:1f.6 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 5, io base 0x000018e0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Found IRQ 6 for device 0000:00:1d.2 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001c00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-2: new low speed USB device using uhci_hcd and address 2 Loading ohci-hcd.ko module Loading ehci-hcd.ko module PCI: Found IRQ 7 for device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 7, io mem 0xf8080000 Clocksource tsc unstable (delta = 92866910 ns) Time: pit clocksource has been installed. ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected Loading mbcache.ko module Loading jbd.ko module Loading ext3.ko module Loading scsi_mod.ko module SCSI subsystem initialized Loading sd_mod.ko module Loading libata.ko module Loading ata_piix.ko module PCI: Found IRQ 3 for device 0000:00:1f.1 PCI: Sharing IRQ 3 with 0000:00:02.0 PCI: Sharing IRQ 3 with 0000:00:1d.0 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011c40 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011c48 irq 15 usb 1-2: device not accepting address 2, error -71 ata2.00: ATA-7: Maxtor 2F040J0, VAM51JJ0, max UDMA/133 ata2.00: 80293248 sectors, multi 0: LBA ata2.00: limited to UDMA/33 due to 40-wire cable ata2.00: configured for UDMA/33 scsi 1:0:0:0: Direct-Access ATA Maxtor 2F040J0 VAM5 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 80293248 512-byte hardware sectors (41110 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] 80293248 512-byte hardware sectors (41110 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 1:0:0:0: [sda] Attached SCSI disk Waiting for driver initialization. usb 1-2: new low speed USB device using uhci_hcd and address 4 usb 1-2: configuration #1 chosen from 1 choice input: USB Keyboard as /class/input/input2 input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-2 input: USB Keyboard as /class/input/input3 input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-2 Loading ata_generic.ko module Trying to resume from LABEL=SWAP-sda3 No suspend signature on swap, not resuming. Creating root device. Mounting root filesystem. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys SELinux: Disabled at runtime. audit(1470902413.989:2): selinux=0 auid=4294967295 INIT: version 2.86 booting Welcome to Fedora Press 'I' to enter interactive startup. Setting clock (utc): Mon Aug 1 04:00:18 EDT 2016 [ OK ] Starting udev: [ OK ] Loading default keymap (us): [ OK ] Setting hostname localhost.localdomain: [ OK ] No devices found Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda2 /: clean, 142680/9755328 files, 1091999/9747438 blocks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 /boot1: clean, 37/26104 files, 20498/104388 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Applying Intel CPU microcode update: [ OK ] Checking for hardware changes [ OK ] Bringing up loopback interface: [ OK ] Starting auditd: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting irqbalance: [ OK ] Starting rpcbind: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: [ OK ] Starting system message bus: [ OK ] Starting Bluetooth services:[ OK ] [ OK ] Mounting other filesystems: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting hidd: [ OK ] Starting autofs: Loading autofs4: [ OK ] Starting automount: [ OK ] [ OK ] Starting hpiod: [ OK ] Starting hpssd: [ OK ] Starting cups: [ OK ] Starting sshd: [ OK ] Starting ntpd: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: [ OK ] Starting ConsoleKit: [ OK ] Starting crond: [ OK ] [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] Starting dhcdbd:[ OK ] Starting yum-updatesd: [ OK ] Starting Avahi daemon... [ OK ] Starting HAL daemon: [ OK ] Starting smartd: [ OK ] Fedora release 7 (Moonshine) Kernel 2.6.23.12-52.fc7 on an i686 localhost.localdomain login: root Password: Last login: Mon Dec 31 19:03:59 from smitty2m.smittys.pointclark.net [root@localhost ~]# lspci -vvv 00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- (32-bit, prefetchable) Capabilities: [40] Vendor Specific Information 00:02.0 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-