I have this definition in targets/tyan/s2850/Config.lb:
option
CONFIG_CONSOLE_BTEXT=1
Not default as you wrote.
Is it ok?
Should I had
the same thing in src/mainboard/tyan/s2850/Config.lb?
Sagiv.
-----Original Message-----
From: Yinghai Lu
[mailto:yhlu@tyan.com]
Sent:
To: Sagiv Yefet;
linuxbios@clustermatic.org
Subject: RE: Running with VGA
You need to add
uses CONFIG_CONSOLE_BTEXT
default CONFIG_CONSOLE_BTEXT=1
dir /drivers/ati/ragexl
after that you can get ouput in
Linuxbios after vga init.
You also need to enable the btext
in Etherboot. You should use Etherboot
About kernel, you need to use
kernel patch to enable ragexl frame buffer support.
YH
From: linuxbios-admin@clustermatic.org
[mailto:linuxbios-admin@clustermatic.org] On
Behalf Of Sagiv Yefet
Sent:
To: linuxbios@clustermatic.org
Subject: Running with VGA
Hello,
I
am using Linux Bios on Tyan 2850. The machine is running with console.
I
add to the command line: "console=ttyS0,115200" and I have linux
which runs with console.
How can I
run with VGA? Should I add some code to the bios?
The
VGA driver is: ATI Rage XL.
Sagiv