dmesg -s131072 
Bootdata ok (command line is rw root=/dev/ram0 apic=yes isolcpus=1 console=tty0
console=ttyS0,38400n8r loglevel=7 acpi=force craschkernel=64M@16M bb=1M@15M ramd
isk_size=40960 sm=2500 cm iommu=merge )
Linux version 2.6.16.27-0.6_apz_R1A-smp (geeko@buildhost) (gcc version 4.1.0 (SU
SE Linux)) #1 SMP Fri Jan 26 10:34:35 UTC 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 0000000000001000 (reserved)
 BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
parse_exempt, static: 775946240, dynamic 0
end_pfn: 524288, end_pfn_map: 524288, end_user_pfn: 17179869183
Clean up persistent memory: Signatures removed
Available RAM: 2130169856
nonexempt_total: 775946240
Bitbucket found, initializing exempt area...
Exempt RAM map:
 Exempt: 0000000000000000 - 0000000000001000 (reserved)
 Exempt: 0000000000001000 - 00000000000a0000 (usable)
 Exempt: 00000000000f0000 - 0000000000100000 (reserved)
 Exempt: 0000000000100000 - 000000002f600000 (usable)
 Exempt: 000000002f600000 - 0000000080000000 (exempt)
end_pfn: 194048, end_pfn_map: 524288, end_user_pfn: 17179869183
ACPI: Unable to locate RSDP
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000002f600000
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-000000002f600000
On node 0 totalpages: 189991
  DMA zone: 2636 pages, LIFO batch:0
  DMA32 zone: 187355 pages, LIFO batch:31
  Normal zone: 0 pages, LIFO batch:0
  HighMem zone: 0 pages, LIFO batch:0
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: BROADCOM Product ID: BLAST        APIC at: 0xFEE00000
Processor #0 15:1 APIC version 16
Processor #1 15:1 APIC version 16
I/O APIC #2 Version 17 at 0xFC321000.
I/O APIC #3 Version 17 at 0xFC322000.
I/O APIC #4 Version 17 at 0xFC323000.
Setting APIC routing to physical flat
Processors: 2
Allocating PCI resources starting at 88000000 (gap: 80000000:80000000)
Checking aperture...
CPU 0: aperture @ f8000000 size 64 MB
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Built 1 zonelists
Kernel command line: rw root=/dev/ram0 apic=yes isolcpus=1 console=tty0 console=
ttyS0,38400n8r loglevel=7 acpi=force craschkernel=64M@16M bb=1M@15M ramdisk_size
=40960 sm=2500 cm iommu=merge
APIC Verbosity level yes not recognised use apic=verbose or apic=debugInitializi
ng CPU#0
perfmon: installed CPU0 gate
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
time.c: Detected 1800.127 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 742648k/776192k available (2265k kernel code, 33156k reserved, 929k data
, 212k init)
Calibrating delay using timer specific routine.. 3604.02 BogoMIPS (lpj=1802014)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(2) -> Node 0 -> Core 0
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 16517k freed
ExtINT not setup in hardware but reported by MP table
Using IO-APIC 2
Using IO-APIC 3
Using IO-APIC 4
GSI 16 sharing vector 0xA1 and IRQ 16
GSI 17 sharing vector 0xA9 and IRQ 17
GSI 18 sharing vector 0xB1 and IRQ 18
GSI 19 sharing vector 0xB9 and IRQ 19
GSI 20 sharing vector 0xC1 and IRQ 20
GSI 21 sharing vector 0xC9 and IRQ 21
GSI 22 sharing vector 0xD1 and IRQ 22
GSI 23 sharing vector 0xD9 and IRQ 23
GSI 24 sharing vector 0xE1 and IRQ 24
GSI 25 sharing vector 0xE9 and IRQ 25
GSI 26 sharing vector 0x32 and IRQ 26
GSI 27 sharing vector 0x3A and IRQ 27
GSI 28 sharing vector 0x42 and IRQ 28
GSI 29 sharing vector 0x4A and IRQ 29
GSI 30 sharing vector 0x52 and IRQ 30
Using local APIC timer interrupts.
result 12500888
Detected 12.500 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3601.32 BogoMIPS (lpj=1800664)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(2) -> Node 0 -> Core 1
AMD Processor model unknown stepping 02
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff 1 cycles, maxerr 494 cycles)
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=0
eri_sle_init: OK
pipdriver: ipmiuser_bootcode()
l3send: [hex] 04 06 00 0a 01 00 00 ff ff ff 00 02 00 00
l2send: [hex] 90 02 01 40 00 50 04 00 00 7f 7f 7f 70 00 08 00 00 74
l2send: received ACK
l2recv: [hex] 8c 42 01 40 00 30 04 00 00 00 00 00 00 49
l2recv: sending ACK
l3recv: [hex] 84 06 00 06 01 00 00 00 00 00
pipdriver: status=0x0
DMI not present or invalid.
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter disabled.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.1
PCI: Using IRQ router default [1166/0205] at 0000:00:02.0
PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:03.1[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:03.2[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 161
PCI->APIC IRQ transform: 0000:01:0e.0[A] -> IRQ 15
PCI->APIC IRQ transform: 0000:01:0e.1[A] -> IRQ 15
PCI->APIC IRQ transform: 0000:04:04.0[A] -> IRQ 50
PCI->APIC IRQ transform: 0000:04:04.1[B] -> IRQ 58
PCI->APIC IRQ transform: 0000:07:00.0[A] -> IRQ 82
PCI->APIC IRQ transform: 0000:07:00.1[B] -> IRQ 82
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ f8000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
PCI: Bridge: 0000:01:0d.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:01.0
  IO window: 1000-1fff
  MEM window: fc000000-fc0fffff
  PREFETCH window: 88000000-880fffff
PCI: Bridge: 0000:00:06.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
  IO window: disabled.
  MEM window: fc100000-fc1fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:08.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:09.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
  IO window: 2000-2fff
  MEM window: fc200000-fc2fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
Exempt memory @ 0x0000002f600000 (size 0x00000050a00000) @ virtual 0xffff81002f6
00000
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(943922521.547:1): initialized
eri_sle: init_module
Bitbucket: address 15728640 end 16777215
Bitbucket: address f00000 end ffffff
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
perfmon: version 2.2
perfmon: added sampling format default
PCI: Setting latency timer of device 0000:00:08.0 to 64
pcie_portdrv_probe->Dev[0132:1166] has invalid IRQ. Check vendor BIOS
PCI: Setting latency timer of device 0000:00:09.0 to 64
pcie_portdrv_probe->Dev[0132:1166] has invalid IRQ. Check vendor BIOS
PCI: Setting latency timer of device 0000:00:0a.0 to 64
pcie_portdrv_probe->Dev[0132:1166] has invalid IRQ. Check vendor BIOS
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[0132:1166] has invalid IRQ. Check vendor BIOS
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 40960K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: SanDisk SDCFH-4096, CFA DISK drive
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 8005536 sectors (4098 MB) w/1KiB Cache, CHS=7942/16/63
 hda: hda1 hda2
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
EDAC MC: Ver: 2.0.1 Jan 26 2007
EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
pipdriver: init_module
Bitbucket 1.0 loaded
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
crc error
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 212k freed
NET: Registered protocol family 17
tg3.c:v3.49 (Feb 2, 2006)
eth0: Tigon3 [partno(BCM95780) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1
000BaseT Ethernet 00:01:ec:f0:00:ff
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76144000] dma_mask[40-bit]
eth1: Tigon3 [partno(BCM95780) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1
000BaseT Ethernet 00:01:ec:f0:01:00
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76144000] dma_mask[40-bit]
Intel(R) PRO/1000 Network Driver - version 7.0.33-NAPI
Copyright (c) 1999-2005 Intel Corporation.
PCI: Setting latency timer of device 0000:07:00.0 to 64
e1000: 0000:07:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:01:ec:f0:01:
02
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
PCI: Setting latency timer of device 0000:07:00.1 to 64
e1000: 0000:07:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:01:ec:f0:01:
03
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
e100: eth4: e100_probe: addr 0xfc327000, irq 161, MAC addr 00:01:EC:F0:01:01
perfmon: family=15 x86_model=33
perfmon: AMD X86-64 PMU detected, 4 PMCs, 4 PMDs, 4 counters (47 bits)
perfmon: AMD X86-64 PMU installed
tg3: eth0: No interrupt was generated using MSI, switching to INTx mode. Please
report this failure to the PCI maintainer and include system chipset information
.
tg3: eth1: No interrupt was generated using MSI, switching to INTx mode. Please
report this failure to the PCI maintainer and include system chipset information
.
e100: eth4: e100_watchdog: link up, 100Mbps, full-duplex
bruf: module license 'Proprietary' taints kernel.
bruf_init: module version 0.14
bruf_init: registered bruf with Major Number = 0x7f
SCSI subsystem initialized
Fusion MPT base driver 3.03.17.04
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT LAN driver 3.03.17.04
Fusion MPT SPI Host driver 3.03.17.04
Fusion MPT FC Host driver 3.03.17.04
Fusion MPT SAS Host driver 3.03.17.04
Fusion MPT misc device (ioctl) driver 3.03.17.04
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.2: irq 10, io mem 0xfc326000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.27-0.6_apz_R1A-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:03.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
libata version 1.20 loaded.
sata_svw 0000:01:0e.0: version 1.07
ata1: SATA max UDMA/133 cmd 0xFFFFC20000034000 ctl 0xFFFFC20000034020 bmdma 0xFF
FFC20000034030 irq 15
ata2: SATA max UDMA/133 cmd 0xFFFFC20000034100 ctl 0xFFFFC20000034120 bmdma 0xFF
FFC20000034130 irq 15
ata3: SATA max UDMA/133 cmd 0xFFFFC20000034200 ctl 0xFFFFC20000034220 bmdma 0xFF
FFC20000034230 irq 15
ata4: SATA max UDMA/133 cmd 0xFFFFC20000034300 ctl 0xFFFFC20000034320 bmdma 0xFF
FFC20000034330 irq 15
ata1: SATA link down (SStatus 4)
scsi0 : sata_svw
ata2: SATA link down (SStatus 4)
scsi1 : sata_svw
ata3: SATA link down (SStatus 4)
scsi2 : sata_svw
ata4: SATA link down (SStatus 4)
scsi3 : sata_svw