Re: [coreboot] Getting started with Coreboot on Intel Core

[Stefan Reinauer]

On 3/8/10 6:36 PM, Karl-Heinz Nirschl wrote:
> Hi,
>
> i should append:
>
> this is using a spi flash with 2 Megs and todays svn version.
> i also tried with a 1 meg fhw with a somewhat earlier version of
> coreboot. same problem.
>
> regards,
>
> karl
>
> 2010/3/8 Karl-Heinz Nirschl :
> > Hi there,
> >
> > i'm new to coreboot and trying to port coreboot to a intel core based
> > board. it's a u2500 with a ich7m and 945gm.
> > i started with kontron 986lcd-m which should be quite similar but
> > didn't have much success so far.

Did you adapt the code for your SuperIO chip? Do you get any messages on
the serial port?
> > the board hangs with post code 0x23 (pci post card) which is bevor
> > "call   stage1_main" in model_6ex/cache_as_ram.inc.
> >
> > as this is very early and the cpu never seem to come to stage1_main
> > (in cache_as_ram_disable.c) i assume i have a problem with my
> > toolchain.

Try this one:

Index: src/northbridge/intel/i945/early_init.c
===================================================================
--- src/northbridge/intel/i945/early_init.c (revision 5196)
+++ src/northbridge/intel/i945/early_init.c (working copy)
@@ -867,7 +867,7 @@
i945_setup_bars();

/* Change port80 to LPC */
- RCBA32(GCS) &= (~0x04);
+ //RCBA32(GCS) &= (~0x04);

/* Just do it that way */
RCBA32(0x2010) |= (1 << 10);

Then post codes keep going to PCI instead of LPC and you should see
where it's going.
> > I build on ubuntu 8.04 (Hardy Heron) with nothing special.
> >
> > Any hints for a coreboot newbie? Which additional information could i
> > provide to find the problem?

You should use the reference toolchain in util/crossgcc