You
may need to copy 82801ER to 82801CA, and change device id to meet that with CA.
Regards
YH
From: Jay Nelson
[mailto:jay.nelson@copansys.com]
Sent: Monday, July 19, 2004 2:57
PM
To: linuxbios@clustermatic.org
Subject: Pentium-M with E7501
Chipset Implementation
Hello,
I am so pleased to find a freebios for
Linux I’m beside myself.
I have been researching freebios2 with the hope that
I can use it for the following configuration:
Intel Pentium-M (
Intel E7501 chipset: MCH
P64H (82870P2)
ICH3 (82801CA)
Headless with RS232 mapped to a custom FPGA connected
to the ICH3 PCI32 bus.
It appears that the Tyan platform S2735 is the
closest match to my configuration.
The 82801CA is probably close enough to the 82801ER
to work.
Any hints/thoughts on this project would be
appreciated.
Thanks.
Jay Nelson
Principal Development Engineer