Boot log and your MB Config.lb?
YH
From:
linuxbios-bounces@linuxbios.org [mailto:linuxbios-bounces@linuxbios.org] On Behalf Of Joe Pub
Sent: Wednesday, February 28, 2007
9:07 AM
To: linuxbios@linuxbios.org
Subject: [LinuxBIOS] LinuxBIOS and
VMWare
Hi There,
Has anyone had any success with VMWare. I have partially implemented the
PC87360 SIO chip which has give me serial and I can boot LinuxBIOS up to the
elf payload stage. I'm trying to get the VMWare VGA to work at no
avail. Has anyone else has success with this.
I have added
default CONFIG_CONSOLE_VGA=1
default CONFIG_PCI_ROM_RUN=1
to the Optionslb file and adjusted the size of the ROM image by -32KB (sizeof
VGA BIOS for VMWare)
and also added
device pci f.0 on
# VGA controller
chip
drivers/pci/onboard
device pci f.0 on end
register "rom_address" =
"0xfff80000"
end
end
to the Config.lb.
When I start VMWare with this image though it does nothing but sit there with
no VGA. I have even enabled serial logging back on using
CONFIG_CONSOLE_SERIAL8250 but still continue to use CONFIG_PCI_ROM_RUN but
nothing then even gets written to the serial port.
When does the VGA BIOS rom get called, at what stage?
Regards,
Joe