Yu-Cheng, looking through the log and just have two suggestions here.1. It mentions the payload size is 0xc5a5, is it too small for a payload? My understanding is that something wrong in payload compressing, please set CONFIG_COMPRESSED_PAYLOAD_LZMA to N and try again, I remember I saw similar issue few years ago, but never look into the details.CBFS: Found @ offset 102c0 size c5a52. I noticed you've reported 0xC000 - 0xFFFFF as the normal RAM, QEMU should have shadow RAM switches for this special address RAM, I would suggest you reporting the RAM starting from 0x10000.0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000c0000-0000000007fb0fff: RAM 3. 0000000007fb1000-0000000007ffffff: CONFIGURATION TABLESOn Thu, Jun 18, 2015 at 10:58 AM, Yu-Cheng Liu <peter90609@gmail.com> wrote:--hello,Below are my error message when using SeaBIOS as coreboot payload,Please help me figure out what’s wrong with my steps.Thank you in advance.coreboot table: 316 bytes.IMD ROOT 0. 07fff000 00001000IMD SMALL 1. 07ffe000 00001000CONSOLE 2. 07fde000 00020000ACPI 3. 07fba000 00024000SMBIOS 4. 07fb9000 00000800COREBOOT 5. 07fb1000 00008000IMD small region:IMD ROOT 0. 07ffec00 00000400CAR GLOBALS 1. 07ffebe0 0000000cROMSTAGE 2. 07ffebc0 00000004GDT 3. 07ffe9c0 00000200CBFS provider active.CBFS @ 100000 size ffc80CBFS: Locating 'fallback/payload'CBFS: Found @ offset 102c0 size c5a5'fallback/payload' located at offset: 1102f8 size: c5a5Loading segment from rom address 0xfff102f8code (compression=1)New segment dstaddr 0xe7c04 memsize 0x183fc srcaddr 0xfff10330 filesize 0xc56dLoading segment from rom address 0xfff10314Entry Point 0x000fcfffBounce Buffer at 07f5e000, 338264 bytesLoading Segment: addr: 0x00000000000e7c04 memsz: 0x00000000000183fc filesz: 0x000000000000c56dlb: [0x0000000000100000, 0x00000000001294ac)Post relocation: addr: 0x00000000000e7c04 memsz: 0x00000000000183fc filesz: 0x000000000000c56dusing LZMAlzma: Decoding error = 1Payload not loaded.PS.:if you want see more about my option setting,stepSetpup step:SeaBIOS config:Coreboot config:Erro Message:
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot