Hi....Good Afternoon
i bought usb mass storage card from one company .
the interface of my usb mass storage card with motheboard is PCI.
the Design is smthing like this......
pci-Pci Bridge --------------->pci/USB2 bridge
----------> usb2/NAND
controller----------------->NAND CHIPS.
the hardware manual of this card tells PCI
Interrupt (INTB) is passed to PCI Slot.
Now i wrote the pci Device Driver to know
the vendor id, device id ,int line, int pin etc... i got the vendor id ,device
id but on INT LINE i am getting 0XFF; i am not able to undestand tht why i am
not getting the exact IRQ for this card...
is this is correct way what i am doing if not please
suggest me how to get the correct IRQ no....
thanks in advance
Regards
sandeep
Gulati | HAL-Edgewood
sandeep.gulati@haledgewood.com
+919620291990