Hi, folks

my config file is:

# Note that this is RELATIVE TO WHERE YOU ARE WHEN YOU RUN THE
# CONFIG TOOL. Make it absolute if you like
target l440bx

mainboard intel/l440bx

# Enable Serial Console for debugging
# It will come up at 115200,8n1
#option SERIAL_CONSOLE=1

# Enable MicroCode update and L2 Cache init for PII and PIII
option UPDATE_MICROCODE
option CONFIGURE_L2_CACHE

# Use the internal VGA frame buffer device
#option HAVE_FRAMEBUFFER
#option USE_CACHE_RAM=0
#option USE_GENERIC_ROM=0
#option USE_ELF_BOOT=0

#makedefine  PHLASH_BASE_NAME=p13-0125
#makedefine BOOT_IMAGE=/tftpboot/netboot.ebi
#makedefine BOOT_IMAGE=vmlinux.bin.gz.block

# Path to your kernel (vmlinux)
# NOTE; you need a path to your test12 kernel here.
#linux /manpreet/freebios/linux
linux  /home/tesi/src

# Kernel command line parameters
#commandline ro panic=5 root=/dev/hda5 console=ttyS0,115200 debug 3


NLBConfig.py( ver. 1.37) runs correctly while compiling I got this message:

gcc -nostdlib -r -o linuxbios_c.o c_start.o  linuxbios.a /usr/lib/gcc-lib/i386-r
edhat-linux/2.96/libgcc.a
perl -e 'foreach $var (split(" ", $ENV{VARIABLES})) { if ($ENV{$var} =~ m/^(0x[0
-9a-fA-F]+|0[0-7]+|[0-9]+)$/) { print "$var = $ENV{$var};\n"; }}' > ldoptions
gcc -nostdlib -nostartfiles -static -o linuxbios_c -T /home/tesi/src/freebios/sr
c/config/linuxbios_c.ld linuxbios_c.o
linuxbios_c.o: In function `displayinit':
linuxbios_c.o(.text+0x3605): undefined reference to `ttys0_init'
linuxbios_c.o: In function `__display_tx_byte':
linuxbios_c.o(.text+0x361a): undefined reference to `ttys0_tx_byte'
collect2: ld returned 1 exit status
make: *** [linuxbios_c] Error 1


Anithing that I am missing ?

Regards.