If you have smbus hub,
You may need to use
smbus_send_byte(hub_address, hub_channel);
or
smbus_write_byte(hub_address, hub_channel);
the code is same as CK804’s, and the
code is verified with Tyan S4881 and 4885.
For PCA9556/PCA9516
static inline void activate_spd_rom(const
struct mem_controller *ctrl)
{
#define SMBUS_HUB 0x18
unsigned device=(ctrl->channel0[0])>>8;
smbus_write_byte(SMBUS_HUB,
0x01, device);
smbus_write_byte(SMBUS_HUB,0x03,
0);
}
YH
From:
linuxbios-bounces@linuxbios.org [mailto:linuxbios-bounces@linuxbios.org] On Behalf Of bxshi
Sent: Monday, January 22, 2007
11:04 PM
To: yinghailu@gmail.com
Cc: linuxbios@linuxbios.org
Subject: Re: [LinuxBIOS] MCP55
LinuxBIOS with USB debug
Dr. Lu,
In mcp55_smbus.h
static int do_smbus_send_byte(unsigned smbus_io_base, unsigned device,
unsigned char val)
{
.....
outb(0, smbus_io_base +
SMBHSTCMD);
.....
}
I wonder why you write 0 to SMBHSTCMD ? if we are using a
smbus_hub , I think we should write the channel number we want to enable
to this register. for example , if my memory controller is on channel 2 , we
should write outb(2,smbus_io_base+SMBHSTCMD).
So could that be changed to outb(val,smbus_io_base +
SMBHSTCMD) ?
Thanks
bxshi