superiotool r4375
Detected VIA VT1211 SuperIO (rev. 02).

VT1211 Configuration Space:
    0x07: 0x0D    (0x00)    "Logical Device Number"
    0x20: 0x3C    (0x3C)    "Device ID"
    0x21: 0x02    (0x01)    "Device Revision"
    0x22: 0x00    (0x00)    "Power Down Control"
    0x23: 0x11    (0x11)    "LPC Wait State Select"
    0x24: 0x00    (0x00)    "GPIO Port 1 Pin Select"
    0x25: 0x00    (0x00)    "GPIO Port 2 Pin Select"
    0x26: 0x00    (0x00)    "GPIO Port 7 Pin Select"
    0x27: 0x00    (0x00)    "UART2 Multi Function Pin Select"
    0x28: 0x00    (0x00)    "MIDI Multi Function Pin Select"
    0x29: 0x01    (0x00)    "HWM Multi Function Pin Select"
    0x2E: 0x00    (0x00)    "Test Mode A (Do Not Program)"
    0x2E: 0x00    (0x00)    "Test Mode B (Do Not Program)"

VT1211 LDN 0: "Floppy Disk Controller"
    0x30: 0x01    (0x00)    "Activate"
    0x60: 0xFC    (0xFC)    "I/O Base Address"
    0x70: 0x06    (0x06)    "IRQ Select"
    0x74: 0x02    (0x01)    "DRQ Select"
    0xF0: 0x00    (0x00)    "Configuration"
    0xF1: 0x00    (0x00)    "Drive Select"

VT1211 LDN 1: "Parallel Port"
    0x30: 0x00    (0x03)    "Activate"
    0x60: 0xDE    (0xDE)    "I/O Base Address"
    0x70: 0x07    (0x05)    "IRQ Select"
    0x74: 0x00    (0x00)    "DRQ Select"
    0xF0: 0x80    (0x00)    "Control"

VT1211 LDN 2: "Serial Port 1"
    0x30: 0x01    (0x00)    "Activate"
    0x60: 0xFE    (0xFE)    "I/O Base Address"
    0x70: 0x04    (0x04)    "IRQ Select"
    0xF0: 0x00    (0x00)    "Control"

VT1211 LDN 3: "Serial Port 2"
    0x30: 0x01    (0x00)    "Activate"
    0x60: 0xBE    (0xBE)    "I/O Base Address"
    0x70: 0x03    (0x03)    "IRQ Select"
    0xF0: 0x00    (0x00)    "Control"

VT1211 LDN 6: "MIDI"
    0x30: 0x00    (0x00)    "Activate"
    0x60: 0x03    (0x03)    "I/O Base Address (High)"
    0x61: 0x30    (0x30)    "I/O Base Address (Low)"
    0x70: 0x00    (0x00)    "IRQ Select"

VT1211 LDN 7: "Game Port"
    0x30: 0x01    (0x00)    "Activate"
    0x60: 0x00    (0x02)    "I/O Base Address (High)"
    0x61: 0x00    (0x00)    "I/O Base Address (Low)"

VT1211 LDN 8: "GPIO"
    0x30: 0x00    (0x00)    "Activate"
    0x60: 0xE9    (0xE9)    "I/O Base Address (High)"
    0x61: 0x00    (0x00)    "I/O Base Address (Low)"
    0x70: 0x00    (0x00)    "Event IRQ Select"
    0xF0: 0x00    (0x00)    "Port Select"
    0xF1: 0x00    (0x00)    "Pin Configuration"
    0xF2: 0x00    (0x00)    "Pin Polarity Define"

VT1211 LDN 9: "Watchdog Timer"
    0x30: 0x00    (0x00)    "Activate"
    0x60: 0xEA    (0xEA)    "I/O Base Address (High)"
    0x61: 0x00    (0x00)    "I/O Base Address (Low)"
    0x70: 0x00    (0x00)    "IRQ Select"
    0xF0: 0x02    (0x00)    "Configuration"

VT1211 LDN A: "Wake-Up Controller"
    0x30: 0x00    (0x00)    "Activate"
    0x60: 0xEB    (0xEB)    "I/O Base Address (High)"
    0x61: 0x00    (0x00)    "I/O Base Address (Low)"
    0x70: 0x00    (0x00)    "IRQ Select"

VT1211 LDN B: "Hardware Monitor"
    0x30: 0x01    (0x00)    "Activate"
    0x60: 0x60    (0xEC)    "I/O Base Address (High)"
    0x61: 0x00    (0x00)    "I/O Base Address (Low)"
    0x70: 0x02    (0x00)    "IRQ Select"

VT1211 LDN C: "Fast IR"
    0x30: 0x00    (0x00)    "Activate"
    0x60: 0x00    (0xE8)    "I/O Base Address (High)"
    0x61: 0x00    (0x00)    "I/O Base Address (Low)"
    0x70: 0x00    (0x00)    "IRQ Select"
    0x74: 0x09    (0x06)    "DRQ Select"
    0xF0: 0x00    (0x00)    "DMA Selection"

VT1211 LDN D: "ROM"
    0x30: 0x01    (0x01)    "Interface Activate"
    0xF0: 0x00    (0x00)    "Decoding Control"