On Wed, Mar 5, 2008 at 9:48 AM, Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net wrote:
Can we set up the power button in a way that makes it work always, then change the setup in stage2?
you really don't want that button working pre stage2, because, if the button is hardwired on, the machine turns off in 4 seconds :-)
So you don't want to "default enable" it. You want to "don't do ANYTHING until you are sure". right now code is default enable, and I had to comment that out to get dbe62 up.
Need this to do stage2. Without it the 5536 won't decode PCI.
Did you mean stage1?
I don't think the 5536 is visible until you do this, i.e. is not addressable? Is that what you meant Marc?
I am going to take this slowly. I am going to move power button to stage 2, and make it a standard part of cs5536 bringup in stage 2. No harm is done by delaying the enable of the power button, and I already know lots of harm is done by enabling the power button too early. Patch later tonight.
ron