Graeme Russ wrote:
I found the BIOS chip:
MXIO MX 25L1606E M2I-126 3J761000 Z120272
16Mb (8MB), 200mil 8-SOP, -40°C to 85°C, 86MHz, Pb-Free
MXIC yep. Solder something to it so that you can reprogram. Use the VCC on the chip for programming. Hold the mainboard in reset while you drive the SPI signals. I would check first that the chipset doesn't sink too much current. (Ampmeter+2k2 resistor between VCC and one signal at a time. The current should stay well under 1.5mA.)
//Peter