[root@localhost ~]# dmesg Linux version 2.6.23.15-80.fc7 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Sun Feb 10 17:29:10 EST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 0000000003800000 (usable) 0MB HIGHMEM available. 56MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 14336) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 14336 HighMem 14336 -> 14336 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 14336 On node 0 totalpages: 14336 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 80 pages used for memmap Normal zone: 10160 pages, LIFO batch:1 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap DMI not present or invalid. Using APIC driver default ACPI: no DMI BIOS year, acpi=force is required to enable ACPI ACPI: Disabling ACPI support Allocating PCI resources starting at 10000000 (gap: 03800000:fc800000) swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 14224 Kernel command line: ro root=LABEL=/ rhgb quiet Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffb000 (0107b000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07a6000 soft=c0786000 PID hash table entries: 256 (order: 8, 1024 bytes) Detected 933.116 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 49120k/57344k available (2178k kernel code, 7816k reserved, 1114k data, 280k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xc4000000 - 0xff7fe000 ( 951 MB) lowmem : 0xc0000000 - 0xc3800000 ( 56 MB) .init : 0xc073d000 - 0xc0783000 ( 280 kB) .data : 0xc062098d - 0xc0737544 (1114 kB) .text : 0xc0400000 - 0xc062098d (2178 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 1867.13 BogoMIPS (lpj=933566) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed CPU0: Intel(R) Pentium(R) III CPU - S 933MHz stepping 04 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=180 bytes sizeof(task_struct)=1552 bytes Booting paravirtualized kernel on bare hardware Time: 1:00:08 Date: 88/10/80 NET: Registered protocol family 16 ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread C37D2000 could not acquire Mutex [1] [20070126] No dock devices found. PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) * The chipset may have PM-Timer Bug. Due to workarounds for a bug, * this clock source is slow. If you are sure your timer does not have * this bug, please use "acpi_pm_good" to disable the workaround PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/24c0] at 0000:00:1f.0 PCI: setting IRQ 3 as level-triggered PCI: Found IRQ 3 for device 0000:00:02.0 PCI: Sharing IRQ 3 with 0000:00:1d.0 PCI: setting IRQ 7 as level-triggered PCI: Found IRQ 7 for device 0000:00:1d.1 PCI: setting IRQ 6 as level-triggered PCI: Found IRQ 6 for device 0000:00:1d.2 PCI: Sharing IRQ 6 with 0000:00:1f.1 PCI: setting IRQ 12 as level-triggered PCI: Found IRQ 12 for device 0000:00:1d.7 PCI: setting IRQ 5 as level-triggered PCI: Found IRQ 5 for device 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.5 PCI: setting IRQ 9 as level-triggered PCI: Found IRQ 9 for device 0000:01:08.0 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: f8000000-f80fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 24576 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2847k freed apm: BIOS not found. audit: initializing netlink socket (disabled) audit(546138008.710:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 4AF11E66D9C7B2BE - key was been created 656540576 seconds in future - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 agpgart: Detected an Intel 830M Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 12:332:3 Freeing unused kernel memory: 280k freed Write protecting the kernel read-only data: 846k USB Universal Host Controller Interface driver v3.0 PCI: Found IRQ 3 for device 0000:00:1d.0 PCI: Sharing IRQ 3 with 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 3, io base 0x00002440 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Found IRQ 7 for device 0000:00:1d.1 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 7, io base 0x00002460 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Found IRQ 6 for device 0000:00:1d.2 PCI: Sharing IRQ 6 with 0000:00:1f.1 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 6, io base 0x00002480 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-1: new low speed USB device using uhci_hcd and address 2 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver PCI: Found IRQ 12 for device 0000:00:1d.7 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 12, io mem 0xf8180000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected SCSI subsystem initialized libata version 2.21 loaded. ata_piix 0000:00:1f.1: version 2.12 PCI: Found IRQ 6 for device 0000:00:1f.1 PCI: Sharing IRQ 6 with 0000:00:1d.2 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000124c0 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000124c8 irq 15 usb 1-1: device not accepting address 2, error -71 ata2.00: ATA-6: WDC WD400BB-23FJA0, 13.03G13, max UDMA/100 ata2.00: 78156288 sectors, multi 0: LBA ata2.00: limited to UDMA/33 due to 40-wire cable ata2.00: configured for UDMA/33 scsi 1:0:0:0: Direct-Access ATA WDC WD400BB-23FJ 13.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 78156288 512-byte hardware sectors (40016 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] 78156288 512-byte hardware sectors (40016 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 1:0:0:0: [sda] Attached SCSI disk usb 1-1: new low speed USB device using uhci_hcd and address 4 usb 1-1: configuration #1 chosen from 1 choice input: Logitech Optical USB Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1 usb 1-2: new low speed USB device using uhci_hcd and address 5 usb 1-2: configuration #1 chosen from 1 choice input: Chicony USB Keyboard as /class/input/input3 input: USB HID v1.00 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.0-2 input: Chicony USB Keyboard as /class/input/input4 input,hiddev96: USB HID v1.00 Device [Chicony USB Keyboard] on usb-0000:00:1d.0-2 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(546138021.820:2): selinux=0 auid=4294967295 sd 1:0:0:0: Attached scsi generic sg0 type 0 intel_rng: FWH not detected PCI: Found IRQ 5 for device 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.5 input: PC Speaker as /class/input/input5 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation PCI: Found IRQ 9 for device 0000:01:08.0 e100: eth0: e100_probe: addr 0xf8000000, irq 9, MAC addr 00:10:95:F7:58:11 net eth1: device_rename: sysfs_create_symlink failed (-17) udev: renamed network interface eth0 to eth1 PCI: Found IRQ 5 for device 0000:00:1f.5 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 50829 usecs intel8x0: clocking to 48000 loop: module loaded IRQ handler type mismatch for IRQ 6 current handler: uhci_hcd:usb3 [] setup_irq+0x194/0x1ac [] floppy_hardint+0x0/0xd8 [floppy] [] request_irq+0xc7/0xe5 [] init_module+0x536/0xe33 [floppy] [] cond_resched+0x26/0x31 [] __link_module+0x0/0x10 [] __link_module+0x0/0x10 [] sys_init_module+0x1361/0x14a5 [] blk_init_queue+0x0/0x8 [] syscall_call+0x7/0xb [] xfrm_send_policy_notify+0x35c/0x4fd ======================= floppy0: Unable to grab IRQ6 for the floppy driver parport0: PC-style at 0x378 [PCSPP,EPP] lp0: using parport0 (polling). lp0: console ready sonypi: Sony Programmable I/O Controller Driver v1.26. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2096472k swap on /dev/sda3. Priority:-1 extents:1 across:2096472k IA-32 Microcode Update Driver: v1.14a NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth1: link is not ready audit(545014842.116:3): audit_pid=1624 old=0 by auid=4294967295 Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 i2c-adapter i2c-0: found SMSC47M192 or compatible, version 2, stepping A0 smsc47m1: Found SMSC LPC47M15x/LPC47M192/LPC47M997 python[2050] general protection eip:a78d15 esp:bffec260 error:0 PCI: Found IRQ 3 for device 0000:00:02.0 PCI: Sharing IRQ 3 with 0000:00:1d.0 [drm] Initialized drm 1.1.0 20060810 [drm] Initialized i915 1.6.0 20060119 on minor 0 [root@localhost ~]#