Hi all,

> •        Are you able to boot Yocto with the current combination you have?

We haven’t tested Yocto, but we can boot a Lubuntu.

> Where did you obtain a VBIOS file?

Intel provides the VBIOS in its MRx packages for the CRBs. You need to contact Intel for this.

> •        Is it specifically VBIOS, or is it a VBT.dat file? Or are you running SeaVGABIOS?

I think you need a complete VBIOS bxt_1003.dat (64kB) for SeaBios.

The vbt.dat (5kB) is need by GOP driver. But we haven’t done anything with that yet.

Mario

Von: Tahnia Lichtenstein [mailto:unlich@gmail.com]
Gesendet: Freitag, 3. November 2017 13:46
An: Scheithauer, Mario (DF MC MTS R&D SWRT 4); coreboot@coreboot.org
Betreff: Re: [coreboot] Problems changing payload on Intel Leaf Hill

Hi Mario,

Thank you very much for sharing, that already helps a lot!! I can spot quite a lot of differences to my own build settings.

I've been pursuing a Grub2 payload in the meantime (no success so far), will now return to SeaBIOS and try and incorporate the necessary changes you suggested.

Just a couple of questions so far:

• Are you able to boot Yocto with the current combination you have?
• I have all the blobs around coreboot, except the VBIOS... I have tried all the options in https://www.coreboot.org/VGA_support, but I suspect the reference bootloader images provided by Intel does not use a VBIOS file. I also cannot find a suitable VBIOS on Intel's website. (By the way, thanks for the FIT decomposition tip, I did not know this was possible... I took great pains to find the correct blobs on Intel's website, would have been much easier to just use FIT!) Where did you obtain a VBIOS file? 
• Is it specifically VBIOS, or is it a VBT.dat file? Or are you running SeaVGABIOS?

Many thanks again!

Best regards,

Tahnia

On Fri, Nov 3, 2017 at 2:01 PM, Scheithauer, Mario <Mario.Scheithauer@siemens.com> wrote:

Hi Cameron,

> Did you modify the FSP blobs at all?
Yes, we made some adjustments for our mainboard (mc_apl1).
But they shouldn’t play a decisive role (power states, PCIe settings).

> The reason I ask is that my coreboot build hangs in the FspSiliconInit().
Then you will get pretty far.
We are currently still using the MR2 FSP package for APL-I.
As IFWI template we use the BIOS version v178.10 for the CRBs.
These components are provided by Intel.
That’s it. The CRB should boot with this combination.

Mario

> -----Ursprüngliche Nachricht-----
> Von: Cameron Craig [mailto:Cameron.Craig@exterity.com]
> Gesendet: Freitag, 3. November 2017 11:51
> An: Scheithauer, Mario (DF MC MTS R&D SWRT 4); ahW@n
> Cc: coreboot@coreboot.org
> Betreff: RE: [coreboot] Problems changing payload on Intel Leaf Hill

>
> Hi Mario,
>
> I've been attempting to build coreboot(master) for the Leaf Hill CRB, with no
> success so far.
>
> Did you modify the FSP blobs at all?
> I had a look at your config, the filenames "FSP_MR2_M_ECC_MOD" caught my
> eye.
>
> The reason I ask is that my coreboot build hangs in the FspSiliconInit().
>
> Cheers,
> Cameron
>
>
>
> Cameron Craig | Graduate Software Engineer | Exterity Limited
> tel: +44 1383 828 250 | fax:  | mobile:
> e: Cameron.Craig@exterity.com | w: www.exterity.com
>
>
>
> ____________________________________________________________________
> __
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please visit http://www.symanteccloud.com
> ____________________________________________________________________
> __
--
coreboot mailing list: coreboot@coreboot.org
https://mail.coreboot.org/mailman/listinfo/coreboot