RANGELEY_POSTGOLD4_FSP_004_20150924.fd is the FSP binary, you can rename it to FvFsp.bin and placed it to the path defined in coreboot, ie, `../intel/fsp/rangeley/Fv, to generate coreboot image.On Thu, Feb 4, 2016 at 5:19 AM, 김유석 <poplinux0@gmail.com> wrote:Dear Martin.
Thank's your advise.
I'm use the serial consol port. but can't see any message.
Thank you.
2016-02-02 오후 9:18에 Martin Roth 이(가) 쓴 글:
You might try a different video card. There's an issue in the video bios of the aspeed card that came with the mohon peak.
martin
Dear sir.--
My ENV is see below.
EVB : Intel rangeley Mohon Peak CRB
This time, I was download the coreboot from git.
poplinux@raw work $ > git clone http://review.coreboot.org/coreboot.git ./
poplinux@raw work $ > cd coreboot
poplinux@raw coreboot $ > git submodule update --init --checkout
Next, run make menuconfig and set-up to mohon peak CRB and save & exit
Mainboard
Mainboard vendor (Intel) --->
Mainboard model (Mohon Peak CRB) --->
[ ] Configure defaults for the Intel FSP package
ROM chip size (2048 KB (2 MB)) --->
(0x00200000) Size of CBFS filesystem in ROM
() fmap description file in fmd format
Next, I'm try to build core boot.
poplinux@raw coreboot $ > make
GEN generated/bootblock.ld
CP bootblock/arch/x86/bootblock.ld
LINK cbfs/fallback/bootblock.debug
OBJCOPY cbfs/fallback/bootblock.elf
OBJCOPY bootblock.raw.bin
Checking out SeaBIOS revision 01a84bea2d28a19d2405c1ecac4bdef17683cc0c
Switched to branch 'master'
Performing operation on 'COREBOOT' region...
Name Offset Type Size
cbfs master header 0x0 cbfs header 32
fallback/romstage 0x80 stage 22684
cpu_microcode_blob.bin 0x5980 microcode 0
config 0x5a00 raw 127
revision 0x5ac0 raw 570
cmos_layout.bin 0x5d40 cmos_layout 1316
fallback/dsdt.aml 0x62c0 raw 7952
payload_config 0x8240 raw 1574
payload_revision 0x88c0 raw 237
(empty) 0x8a00 null 29848
mrc.cache 0xfec0 mrc_cache 65536
fallback/ramstage 0x1ff00 stage 46922
fallback/payload 0x2b6c0 payload 61122
(empty) 0x3a5c0 null 1856216
bootblock 0x1ff8c0 bootblock 1528
Finally, I'm got a coreboot image.
poplinux@raw build $ > ls build/coreboot.rom
build/coreboot.rom
poplinux@raw build $ > ./build/cbfstool build/coreboot.rom print
Performing operation on 'COREBOOT' region...
Name Offset Type Size
cbfs master header 0x0 cbfs header 32
fallback/romstage 0x80 stage 22684
cpu_microcode_blob.bin 0x5980 microcode 0
config 0x5a00 raw 127
revision 0x5ac0 raw 570
cmos_layout.bin 0x5d40 cmos_layout 1316
fallback/dsdt.aml 0x62c0 raw 7952
payload_config 0x8240 raw 1574
payload_revision 0x88c0 raw 237
(empty) 0x8a00 null 29848
mrc.cache 0xfec0 mrc_cache 65536
fallback/ramstage 0x1ff00 stage 46922
fallback/payload 0x2b6c0 payload 61122
(empty) 0x3a5c0 null 1856216
bootblock 0x1ff8c0 bootblock 1528
And I'm write image to my EVB using ALL-100 Gang-writer.
spi flash's write start address is set 0x00000000. write it success.
And I'm attach the flash memory to my EVB.
And power-up the my EVB. But can't see any message on my monitor and serial port both.
Why did not display any message?
And could you support correct configuration file for my EVB?
Thank you.
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot
--
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot