http://www.xeltek.com/home.php http://www.xeltek.com/product.php?productid=16221 It's about $549.00
but no Linux support.
Also there is some EEPROM emulator, then only about download time 1s.
YH
On 8/12/05, Ken Fuchs kfuchs@winternet.com wrote:
Sorry, you are both wrong. The USB cable is used _only_ for power. All data goes through the parallel port. It is a slow (5 minutes to burn and 2 minutes to verify), cheap burner, but I have found it to be extremely reliable.
I was talking about the Enhanced Willem Universal Programmer. Perhaps, the two of you were talking about another, possibly hypothetical flash programmer.
Disclaimer: I'm not using the newest Willem programmer, but I think even the newest Willem programmer still uses USB only for power (They include the option of an AC adapter that can be used instead of the USB cable - an option my USB only powered, older unit lacks).
YH wrote:
you are right.
- download image to burner buffer, NON USB need to 5s..., USB may only
need 1s. 2. issue command to burn from buffer to flash. .... burner need 30s, flash_rom need 10s.
On 8/12/05, yhlu yinghailu@gmail.com wrote:
I hope I could get one with USB2 cable and it could work with Linux.
USB2 would be faster than others.
On 8/12/05, Richard Smith smithbone@gmail.com wrote:
I don't think it matters. Your bottleneck is not the bandwith to the programmer but the time it takes for the flash part to write a byte or block. Flash writes are slow.
Sincerely,
Ken Fuchs kfuchs@winternet.com
LinuxBIOS mailing list LinuxBIOS@openbios.org http://www.openbios.org/mailman/listinfo/linuxbios