Hi. I exited menuconfig and saved and ran make.

In the end it says:

Built lenovo/x220 (ThinkPad X220)
** WARNING **
coreboot has been built without an Intel Firmware Descriptor.
Never write a complete coreboot.rom without an IFD to your
board's flash chip! You can use flashrom's IFD or layout
parameters to flash only to the BIOS region.

Obviously it accepted the Lenovo ThinkPad X220 mainboard settings but what does that warning mean? Is there something to do about it?

Regards,

Bernd


-------- Originalnachricht --------
Betreff: [coreboot] Re: Installing coreboot with SeaBIOS
Von: Nicholas
An: bernd1-1@web.de
Cc: coreboot@coreboot.org


On Sat, Nov 13, 2021 at 2:02 AM bernd1-1@web.de wrote:
>
> Hi. I did "make distclean" and "make menuconfig". I've set the "Mainboard vendor" to Lenovo and the "Mainboard model" to X220.
>
> "SeaBIOS should be the default payload, but you can check that in the Payloads menu."
>
> I see the following in the Payloads menu:
>
> ...
> Add a payload (SeaBIOS) --->
> SeaBIOS version (1.14.0) --->
> ...
>
> Is SeaBIOS the default payload?
>
> Do I need to do
>
> $ make
>
> again after making changes?

Yes, that looks correct. SeaBIOS is set to the payload, so you should
just be able to exit menuconfig and then run make

Regards,
Nicholas
_______________________________________________
coreboot mailing list -- coreboot@coreboot.org
To unsubscribe send an email to coreboot-leave@coreboot.org