Patrick Georgi (patrick@georgi-clan.de) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/444
-gerrit
commit 66e420bb2be78c6062c2b5a7266f9c56b5abd911 Author: Patrick Georgi patrick.georgi@secunet.com Date: Tue Nov 22 10:52:43 2011 +0100
i82801gx: Support power-on-after-power-fail better
Changing CMOS value for power-on-after-power-fail was only honored after reboot, which is counter intuitive (set from "enable" to "disable", power-off, replug device -> device turns on; and similar cases).
Change-Id: If1d88c1c34c3333b636ed3ec1e1fb9bea394e615 Signed-off-by: Patrick Georgi patrick.georgi@secunet.com --- src/southbridge/intel/i82801gx/smihandler.c | 14 +++++++------- 1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/src/southbridge/intel/i82801gx/smihandler.c b/src/southbridge/intel/i82801gx/smihandler.c index 85ee2b4..a021d1f 100644 --- a/src/southbridge/intel/i82801gx/smihandler.c +++ b/src/southbridge/intel/i82801gx/smihandler.c @@ -310,16 +310,16 @@ static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *stat
outl(0, pmbase + GPE0_EN);
- /* Should we keep the power state after a power loss? - * In case the setting is "ON" or "OFF" we don't have - * to do anything. But if it's "KEEP" we have to switch - * to "OFF" before entering S5. + /* Always set the flag in case CMOS was changed on runtime. For + * "KEEP", switch to "OFF" - KEEP is software emulated */ - if (s5pwr == MAINBOARD_POWER_KEEP) { - reg8 = pcie_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); + reg8 = pcie_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); + if (s5pwr == MAINBOARD_POWER_ON) { + reg8 &= ~1; + } else { reg8 |= 1; - pcie_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); } + pcie_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8);
/* also iterates over all bridges on bus 0 */ busmaster_disable_on_bus(0);