Did you connect serial console? You should
get some sth from the serial port.
YH
From: Anil B G
[mailto:bg.anil@gmail.com]
Sent: Friday, July 14, 2006 8:15
AM
To: Lu, Yinghai
Cc: linuxbios@linuxbios.org
Subject: Re: [LinuxBIOS] Build
issue for khepri target
Hi,
Thanks for the help. I changed the option
FALLBACK_SIZE=262144 in the targets/newisys/khepri/Config.lb and I was able to
build the khepri.rom file of size 512K. Would be nice to document the
same somewhere.
I also managed to try loading the same on
a khepri board that I could lay my hands on.
However the system did not boot . Is there
a way to enable some beep() or something similar early on to know that the
processor has started executing the
LinuxBIOS code. I do not have a scope or other hardware that I could use to
probe.
There was some output on the serial but
that from the service processor that my khepri board has.
Any pointers?
Regards
Anil
On 7/12/06, Lu,
Yinghai <yinghai.lu@amd.com>
wrote:
Please change FALLBACK_SIZE in MB Config.lb to
#default FALLBACK_SIZE=0x40000
YH
From: linuxbios-bounces@linuxbios.org
[mailto:linuxbios-bounces@linuxbios.org ]
On Behalf Of Anil B G
Sent: Wednesday, July 12, 2006
7:58 AM
To: linuxbios@linuxbios.org
Subject: [LinuxBIOS] Build issue
for khepri target
Hi,
I am new to LinuxBIOS. I downloaded the latest snapshot of LinuxBIOSv2 and
tried building it for a couple of boards (newisys/intel etc).
I
was able to build it for intel but when I tried to build it for newisys/khepri
I got the following error:
gcc
-o buildrom /home/anil/LinuxBios/LinuxBIOSv2/util/buildrom/buildrom.c
./buildrom linuxbios.strip linuxbios.rom payload 0x20000 0x20000
payload (77000) + linuxbios (131072) size larger than ROM (131072) size!
make[1]: *** [linuxbios.rom] Error 1
make[1]: Leaving directory
`/home/anil/LinuxBios/LinuxBIOSv2/targets/newisys/khepri/khepri/fallback'
make: *** [fallback/linuxbios.rom] Error 1
I
disabled the fallback option and then was able to get the khepri.rom whose size
was 384K. I am using the FILO as the payload.
Is
the size of 384K fine? Has any one used LinuxBIOSv2 on khepri? Would appreciate
any help.
Pls.
let me know if any addl. info is reqd.
The gcc
version is 3.4.3
Regards
Anil