Re: [coreboot] Getting serial output from w83627hf?

[QingPei Wang]

the superio part should placed under the LCP bridge.
for your mainboard,
it should under
"            device pci 1f.0 on end  # LPC bridge
"
add the superio things like:
"
            device pci 1f.0 on end  # LPC bridge
            chip superio/winbond/w83627hf
                device pnp 2e.0 on #  Floppy
                    io 0x60 = 0x3f0
                    irq 0x70 = 6
                    drq 0x74 = 2
                end

"

Best wishes
QingPei Wang
Phone: 86+018930528086

2011/10/17 Alp Eren Köse
> Hi all,
>
> I can't get serial output from the board I am trying to put coreboot on, so
> I am not able to go any further to see whats going on..
>
> The board has a Winbond W83627HF/F/HG/G (id=0x52, rev=0x41) at 0x2e.
>
> I couldn't figure out where to put the "chip superio/winbond/w83627hf"
> section in the "devicetree.cb" file layout?
> Could someone please explain the devicetree.cb file structure? or point a
> way?
>
> The "lspci -tvnn" output and my modified "devicetree.cb" file are at the
> attachment.
>
> Thanks in advance,
> Alp