Hi,
I have captured the output of serial (COM A), that comes from the SP. However, I am unable to disable the same and get the output of LinuxBIOS on the serial
=======================================================================================
Starting OpenBSD Secure Shell server: sshd.
localhost login: root
Password:
localhost # platform get consi ole
Error. The requested service is not available.
localhost # platform
platform: Error. Unknown subcommand.
Usage: platform console {-h|--help}
platform get console {-h|--help}
platform get hostname {-h|--help}
platform get mac {-h|--help}
platform get power state {-h|--help}
platform get product-id {-h|--help}
platform get os state {-h|--help}
platform set console {-h|--help}
platform set os state boot {-h|--help}
platform set os state reboot {-h|--help}
platform set os state shutdown {-h|--help}
platform set os state update-bios {-h|--help}
platform set power state {-h|--help}
localhost # platform get consil ole
Rear Panel
Platform COMA
localhost # platform set console -d
Error. Invalid parameter(s).
localhost # platform set consi ole -help
platform set console {--serial|-s} sp [{{--enable|-e}|{--disable|-d}}]
[{{--prune|-p}|{--noprune|-n}}] [{--speed|-S}
{1200|2400|4800|9600|19200|38400|57600|115200}] [{--log|-l} size]
[{-h|--help}]
or
platform set console {--serial|-s} platform [{-h|--help}]
{-S|--speed} {1200|2400|4800|9600|19200|38400|57600|115200}
Select the port speed on the SP to use to connect to the
platform console. BIOS, the platform OS and the SP must all
be configured for the same speed. This setting does not
affect the platform configuration
Cannot be used with: -s=platform
{-d|--disable} Indicate that the platform console monitor is inactive
Cannot be used with: -e -s=platform
{-e|--enable} Indicate that the platform console monitor is active
Cannot be used with: -d -s=platform
{-h|--help} Print the usage message.
{-l|--log} size Select the trigger size in KB for console log rotation.
Minimum 64KB, Maximum 1024KB
Cannot be used with: -s=platform
{-n|--noprune} Indicate that the platform console log should be the raw
console data
Cannot be used with: -p -s=platform
{-p|--prune} Indicate that the platform console log is to be cleaned of
ANSI sequences and pruned of duplicated information
Cannot be used with: -n -s=platform
{-s|--serial} {sp|platform}
Specify whether the serial port is connected to the platform
COMA port, or the SP serial console
Cannot be used with: -e [platform] -d [platform] -p [platform] -n [platform] -S [platform] -l [platform]
localhost #
========================================================================================