On 3/23/10 4:18 PM, Pawe³ Stawicki wrote:

Hm,
The reason for the: noapic acpi=off
is that I don't know how to make the acpi part for my board.

And noapic?

Your mptable says it's virtual wire mode, but that won't work with noapic.



2010/3/23 Stefan Reinauer <stepan@coresystems.de>
On 3/22/10 12:41 AM, Pawe³ Stawicki wrote:
 /boot/vmlinuz-2.6.28.10  ro earlyprintk=serial,0x2f8,9600n8,keep no-hlt noapic acpi=off

I was going to say it sure looks like an interrupt problem until I saw the line which kind of makes it certain...

any reason for noapic acpi=off?




-- 
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info@coresystems.de  • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866