Yes I am trying to build a kernel image with geode lx frame buffer driver and otherstuff. Even this has been easy because of the rejects at the time of patching the driver with 2.6.-16-54.
But I wanted to see some of the debug messages that are given out at the time of initializing core boot.
Just one question I was using a 512k part and then I switched over to a 1MB flash part and the VSA initialization went through without trouble, so where do you think is the blob location hardcoded.
-Phani
On Mon, Mar 17, 2008 at 12:15:55PM -0700, Phani Babu Giddi wrote:The VSA blob location is hardcoded.
> I am trying to append VGA ROM that is extracted using dd and trying
> to include it as part of the final flash image. Now I reduce the
> ROM_SIZE by 36K for VSM and 32K for VGA ROM.
If you are going to run Linux and X you don't need the VGA ROM, there
are framebuffer and Xorg drivers for geode that work without it.
//Peter
--
coreboot mailing list
coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot