[ 0.000000] Linux version 2.6.20-15-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic) [ 0.000000] Command line: acpi=off pci=noacpi,nobios console=tty0 console=ttyS0,115200 root=UUID=3bd44ac7-3a5b-4d3a-b452-fbbc051c9f8d ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e8000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] PCI: Unknown option `nobios' [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524272) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000007fff0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524272) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524272 [ 0.000000] On node 0 totalpages: 524175 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1086 pages reserved [ 0.000000] DMA zone: 2857 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7111 pages used for memmap [ 0.000000] DMA32 zone: 513065 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] I/O APIC #2 at 0xFEC00000. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Processors: 2 [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000 [ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:50000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515922 [ 0.000000] Kernel command line: acpi=off pci=noacpi,nobios console=tty0 console=ttyS0,115200 root=UUID=3bd44ac7-3a5b-4d3a-b452-fbbc051c9f8d ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 31.605336] Console: colour VGA+ 80x25 [ 31.872246] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 31.880590] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 31.888102] Checking aperture... [ 31.891380] CPU 0: aperture @ ec70000000 size 32 MB [ 31.896303] Aperture too small (32 MB) [ 31.904791] No AGP bridge found [ 31.923151] Memory: 2053128k/2097088k available (2217k kernel code, 43572k reserved, 1162k data, 304k init) [ 32.009304] Calibrating delay using timer specific routine.. 4026.13 BogoMIPS (lpj=8052276) [ 32.017807] Security Framework v1.0.0 initialized [ 32.022558] SELinux: Disabled at boot. [ 32.026464] Mount-cache hash table entries: 256 [ 32.031163] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 32.038337] CPU: L2 Cache: 512K (64 bytes/line) [ 32.042916] CPU 0/0 -> Node 0 [ 32.045925] CPU: Physical Processor ID: 0 [ 32.049978] CPU: Processor Core ID: 0 [ 32.053702] SMP alternatives: switching to UP code [ 32.058751] Early unpacking initramfs... done [ 32.383052] ExtINT not setup in hardware but reported by MP table [ 32.429527] Using local APIC timer interrupts. [ 32.483726] result 12564593 [ 32.486561] Detected 12.564 MHz APIC timer. [ 32.493171] SMP alternatives: switching to SMP code [ 32.498186] Booting processor 1/2 APIC 0x1 [ 32.512061] Initializing CPU#1 [ 32.592369] Calibrating delay using timer specific routine.. 4020.88 BogoMIPS (lpj=8041772) [ 32.592375] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 32.592378] CPU: L2 Cache: 512K (64 bytes/line) [ 32.592380] CPU 1/1 -> Node 0 [ 32.592382] CPU: Physical Processor ID: 0 [ 32.592383] CPU: Processor Core ID: 1 [ 32.592457] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 32.596371] CPU 1: Syncing TSC to CPU 0. [ 32.596991] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 496 cycles) [ 32.597002] Brought up 2 CPUs [ 32.652531] time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer. [ 32.658843] time.c: Detected 2010.332 MHz processor. [ 33.278813] migration_cost=173 [ 33.282275] Time: 2:35:23 Date: 08/16/107 [ 33.286541] NET: Registered protocol family 16 [ 33.291103] PCI: Using configuration type 1 [ 33.295871] ACPI: Interpreter disabled. [ 33.299750] Linux Plug and Play Support v0.97 (c) Adam Belay [ 33.305461] pnp: PnP ACPI: disabled [ 33.309042] PCI: Probing PCI hardware [ 33.312750] PCI: Probing PCI hardware (bus 00) [ 33.313238] Boot video device is 0000:01:08.0 [ 33.313284] PCI: Transparent bridge - 0000:00:06.0 [ 33.319095] PCI: Discovered primary peer bus ff [IRQ] [ 33.324195] PCI: Using IRQ router default [10de/0369] at 0000:00:00.0 [ 33.330688] PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10 [ 33.336569] PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 11 [ 33.342449] PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 15 [ 33.348328] PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 11 [ 33.354200] PCI->APIC IRQ transform: 0000:00:05.1[B] -> IRQ 15 [ 33.360072] PCI->APIC IRQ transform: 0000:00:05.2[C] -> IRQ 10 [ 33.365953] PCI->APIC IRQ transform: 0000:00:06.1[B] -> IRQ 10 [ 33.371829] PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 5 [ 33.377618] PCI->APIC IRQ transform: 0000:01:07.0[A] -> IRQ 15 [ 33.383498] PCI->APIC IRQ transform: 0000:01:08.0[A] -> IRQ 11 [ 33.389374] PCI->APIC IRQ transform: 0000:01:0a.0[A] -> IRQ 5 [ 33.395215] NET: Registered protocol family 8 [ 33.399609] NET: Registered protocol family 20 [ 33.404416] PCI: Bridge: 0000:00:06.0 [ 33.408119] IO window: 9000-9fff [ 33.411588] MEM window: f0000000-f7ffffff [ 33.415812] PREFETCH window: 88000000-880fffff [ 33.420480] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 33.420562] NET: Registered protocol family 2 [ 33.464329] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 33.471812] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 33.481017] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 33.488180] TCP: Hash tables configured (established 262144 bind 65536) [ 33.494837] TCP reno registered [ 33.508357] checking if image is initramfs... it is [ 34.115233] Freeing initrd memory: 7303k freed [ 34.123354] audit: initializing netlink socket (disabled) [ 34.128801] audit(1189910123.108:1): initialized [ 34.133591] VFS: Disk quotas dquot_6.5.1 [ 34.137568] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 34.144089] io scheduler noop registered [ 34.148087] io scheduler anticipatory registered [ 34.152781] io scheduler deadline registered [ 34.157145] io scheduler cfq registered (default) [ 34.184287] Real Time Clock Driver v1.12ac [ 34.188496] Linux agpgart interface v0.102 (c) Dave Jones [ 34.193931] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 34.201836] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 34.208273] mice: PS/2 mouse device common for all mice [ 34.214061] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 34.221820] input: Macintosh mouse button emulation as /class/input/input0 [ 34.228762] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 34.235158] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 34.244741] PNP: No PS/2 controller found. Probing ports directly. [ 34.253530] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 34.260889] If AUX port is really absent please use the 'i8042.noaux' option. [ 34.523561] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 34.528632] TCP cubic registered [ 34.531907] NET: Registered protocol family 1 [ 34.536336] Magic number: 7:458:561 [ 34.540089] hash matches device ptya7 [ 34.544007] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 34.550377] Freeing unused kernel memory: 304k freed [ 34.555408] input: AT Translated Set 2 keyboard as /class/input/input1 [ 34.723729] Capability LSM initialized [ 34.787811] thermal: Unknown symbol acpi_processor_set_thermal_limit [ 35.167816] usbcore: registered new interface driver usbfs [ 35.173533] usbcore: registered new interface driver hub [ 35.179105] usbcore: registered new device driver usb [ 35.223881] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 35.223941] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 35.223944] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 35.229664] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 35.237513] ieee1394: Initialized config rom entry `ip1394' [ 35.238096] ohci_hcd 0000:00:02.0: irq 11, io mem 0xf8007000 [ 35.254310] Linux Tulip driver version 1.1.14 (December 15, 2004) [ 35.261466] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. [ 35.305438] usb usb1: configuration #1 chosen from 1 choice [ 35.311411] hub 1-0:1.0: USB hub found [ 35.315439] hub 1-0:1.0: 10 ports detected [ 35.427406] NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0 [ 35.433757] NFORCE-MCP55: chipset revision 161 [ 35.438360] NFORCE-MCP55: not 100% native mode: will probe irqs later [ 35.445024] NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround. [ 35.453053] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller [ 35.459470] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 35.467034] Probing IDE interface ide0... [ 35.478315] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f5004000-f50047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 35.734600] usb 1-8: new low speed USB device using ohci_hcd and address 2 [ 35.758653] hda: ST340016A, ATA DISK drive [ 35.945526] usb 1-8: configuration #1 chosen from 1 choice [ 36.438524] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 36.443539] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 36.443543] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 36.449012] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 36.456700] Losing some ticks... checking if CPU frequency changed. [ 36.456725] ehci_hcd 0000:00:02.1: debug port 1 [ 36.461446] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 36.461458] ehci_hcd 0000:00:02.1: irq 15, io mem 0xf8008000 [ 36.467344] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 36.475162] usb 1-8: USB disconnect, address 2 [ 36.479934] usb usb2: configuration #1 chosen from 1 choice [ 36.485727] hub 2-0:1.0: USB hub found [ 36.489654] hub 2-0:1.0: 10 ports detected [ 36.598848] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 36.598858] forcedeth: using HIGHDMA [ 36.765991] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001a4d5600e821c0] [ 37.097602] usb 1-8: new low speed USB device using ohci_hcd and address 3 [ 37.125856] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:08.0 [ 37.155390] tulip0: EEPROM default media type Autosense. [ 37.161014] tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. [ 37.169868] tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. [ 37.179080] tulip0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. [ 37.187845] tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block. [ 37.197178] SCSI subsystem initialized [ 37.203489] eth1: Digital DS21142/DS21143 Tulip rev 48 at Port 0x9000, 08:00:2B:C3:50:3B, IRQ 15. [ 37.213575] libata version 2.20 loaded. [ 37.216076] sata_nv 0000:00:05.0: version 3.3 [ 37.216103] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 37.216145] ata1: SATA max UDMA/133 cmd 0x000000000001a400 ctl 0x000000000001a802 bmdma 0x000000000001b400 irq 11 [ 37.226834] ata2: SATA max UDMA/133 cmd 0x000000000001ac00 ctl 0x000000000001b002 bmdma 0x000000000001b408 irq 11 [ 37.237463] scsi0 : sata_nv [ 37.309518] usb 1-8: configuration #1 chosen from 1 choice [ 37.317082] usbcore: registered new interface driver hiddev [ 37.328651] input: PS/2+USB Mouse as /class/input/input2 [ 37.334332] input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:02.0-8 [ 37.341822] usbcore: registered new interface driver usbhid [ 37.347609] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 37.553269] ata1: SATA link down (SStatus 0 SControl 300) [ 37.569137] ATA: abnormal status 0x7F on port 0x000000000001a407 [ 37.575375] scsi1 : sata_nv [ 37.893020] ata2: SATA link down (SStatus 0 SControl 300) [ 37.908898] ATA: abnormal status 0x7F on port 0x000000000001ac07 [ 37.915167] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 37.915198] ata3: SATA max UDMA/133 cmd 0x000000000001b800 ctl 0x000000000001bc02 bmdma 0x000000000001c800 irq 15 [ 37.925848] ata4: SATA max UDMA/133 cmd 0x000000000001c000 ctl 0x000000000001c402 bmdma 0x000000000001c808 irq 15 [ 37.936482] scsi2 : sata_nv [ 38.252758] ata3: SATA link down (SStatus 0 SControl 300) [ 38.268623] ATA: abnormal status 0x7F on port 0x000000000001b807 [ 38.274852] scsi3 : sata_nv [ 38.592509] ata4: SATA link down (SStatus 0 SControl 300) [ 38.608374] ATA: abnormal status 0x7F on port 0x000000000001c007 [ 38.614651] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 38.614682] ata5: SATA max UDMA/133 cmd 0x000000000001cc00 ctl 0x000000000001d002 bmdma 0x000000000001dc00 irq 10 [ 38.625345] ata6: SATA max UDMA/133 cmd 0x000000000001d400 ctl 0x000000000001d802 bmdma 0x000000000001dc08 irq 10 [ 38.635976] scsi4 : sata_nv [ 38.952246] ata5: SATA link down (SStatus 0 SControl 300) [ 38.968120] ATA: abnormal status 0x7F on port 0x000000000001cc07 [ 38.974341] scsi5 : sata_nv [ 39.291997] ata6: SATA link down (SStatus 0 SControl 300) [ 39.307835] ATA: abnormal status 0x7F on port 0x000000000001d407 [ 39.327124] hda: max request size: 128KiB [ 39.331603] hda: Host Protected Area detected. [ 39.331606] current capacity is 78163247 sectors (40019 MB) [ 39.331607] native capacity is 78165360 sectors (40020 MB) [ 39.348367] hda: Host Protected Area disabled. [ 39.353005] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) [ 39.361597] hda: cache flushes not supported [ 39.366077] hda: hda1 hda2 hda3 [ 39.569663] Attempting manual resume [ 39.574805] swsusp: Resume From Partition 3:2 [ 39.574807] PM: Checking swsusp image. [ 39.575081] PM: Resume from disk failed. [ 39.606692] kjournald starting. Commit interval 5 seconds [ 39.606706] EXT3-fs: mounted filesystem with ordered data mode. [ 47.833007] eth0: no link during initialization. [ 49.128894] Adding 1951888k swap on /dev/disk/by-uuid/c7601fc0-23eb-4c73-8ab6-9b407bb8b62a. Priority:-1 extents:1 across:1951888k [ 49.267371] EXT3 FS on hda3, internal journal [ 83.258077] kjournald starting. Commit interval 5 seconds [ 83.258444] EXT3 FS on hda1, internal journal [ 83.258450] EXT3-fs: mounted filesystem with ordered data mode. [ 90.924829] Xorg: vm86 mode not supported on 64 bit kernel