Can you switch to using the RD1's BIOS, even if it's not flashed yet?
It should be a PMC chip of some sort that flashrom currently supports.
It could be that we simply need to add support for whatever flash chip
your mainboard came with, in which case we'll need you to open up your
machine and get the part number.
On 6/30/06,
bios@lists.actweb.info <
bios@lists.actweb.info> wrote:ok when i run flashrom with -V i get the folloowing:-
~/bios/LinuxBIOSv2/util/flashrom# ./flashrom -V
Calibrating delay loop... Setting up microsecond timing loop
176M loops per second
ok
No LinuxBIOS table found.
Enabling flash write on VT8235...OK
Trying Am29F040B, 512 KB
probe_29f040b: id1 0x25, id2 0xa6
Trying Am29F016D, 2048 KB
probe_29f040b: id1 0xff, id2 0xff
Trying At29C040A, 512 KB
probe_jedec: id1 0x8c, id2 0x0
Trying Mx29f002, 256 KB
probe_29f002: id1 0x8c, id2 0x0
Trying SST29EE020A, 256 KB
probe_jedec: id1 0x8c, id2 0x0
Trying SST28SF040A, 512 KB
probe_28sf040: id1 0x25, id2 0xa6
Trying SST39SF020A, 256 KB
probe_jedec: id1 0x8c, id2 0x0
Trying SST39VF020, 256 KB
probe_jedec: id1 0x8c, id2 0x0
Trying SST49LF040B, 512 KB
probe_jedec: id1 0x8c, id2 0x0
Trying SST49LF040, 512 KB
probe_jedec: id1 0x8c, id2 0x0
Trying SST49LF080A, 1024 KB
probe_jedec: id1 0xff, id2 0xff
Trying SST49LF002A/B, 256 KB
probe_jedec: id1 0x8c, id2 0x0
Trying SST49LF003A/B, 384 KB
probe_jedec: id1 0x8c, id2 0x0
Trying SST49LF004A/B, 512 KB
probe_jedec: id1 0x8c, id2 0x0
Trying SST49LF008A, 1024 KB
probe_jedec: id1 0xff, id2 0xff
Trying Pm49FL002, 256 KB
probe_jedec: id1 0x8c, id2 0x0
Trying Pm49FL004, 512 KB
probe_jedec: id1 0x8c, id2 0x0
Trying W29C011, 128 KB
probe_jedec: id1 0x8c, id2 0x0
Trying W29C020C, 256 KB
probe_jedec: id1 0x8c, id2 0x0
Trying W49F002U, 256 KB
probe_jedec: id1 0x8c, id2 0x0
Trying W49V002A, 256 KB
probe_jedec: id1 0x8c, id2 0x0
Trying W39V040A, 512 KB
probe_jedec: id1 0x8c, id2 0x0
Trying M29F040B, 512 KB
probe_29f040b: id1 0x25, id2 0xa6
Trying M29F400BT, 512 KB
probe_m29f400bt: id1 0x25, id2 0x2d
Trying 82802ab, 512 KB
probe_82802ab: id1 0x25, id2 0xa6
Trying 82802ac, 1024 KB
probe_82802ab: id1 0xff, id2 0xff
Trying LHF00L04, 1024 KB
probe_lhf00l04: id1 0xff, id2 0xff
No EEPROM/flash device found.
As far as i can see its not showing the rom number :(
I cant seem to find a version number for flashrom, but it was downloaded via svn on 29 June (this year!!)
I
am running this on 'Ubuntu 5.10 "Breezy Badger"' Kernel : 'Linux ubuntu
2.6.12-9-386 #1 Mon Oct 10 13:14:36 BST 2005 i686 GNU/Linux'
on an VIA EPIA-PD10000 m/board
Matt
Stefan Reinauer wrote ..
> *
bios@lists.actweb.info <
bios@lists.actweb.info> [060630 02:08]:
> > Calibrating delay loop... ok
> > No LinuxBIOS table found.
> > Enabling flash write on VT8235...OK
> > No EEPROM/flash device found.
>
> Run flashrom -V to see the id of the flash chip
>
> Stefan
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
> MailScanner thanks ACTweb Computers for their support.
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.openbios.org/mailman/listinfo/linuxbios