[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffde000 (usable) [ 0.000000] BIOS-e820: 000000007ffde000 - 0000000080000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] last_pfn = 0x7ffde max_arch_pfn = 0x1000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f5a50] f5a50 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] RAMDISK: 36c7e000 - 37637000 [ 0.000000] ACPI: RSDP 000f5a30 00014 (v00 CORE ) [ 0.000000] ACPI: RSDT 7ffe2430 0003C (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: FACP 7ffe3b90 00074 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: DSDT 7ffe2540 01647 (v01 CORE CB-DSDT 00000001 INTL 20130626) [ 0.000000] ACPI: FACS 7ffe2500 00040 [ 0.000000] ACPI: HPET 7ffe3c90 00038 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: APIC 7ffe3cd0 00050 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: SRAT 7ffe3d20 00090 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: SLIT 7ffe3db0 0002D (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: SSDT 7ffe3de0 00250 (v02 CORE COREBOOT 0000002A CORE 0000002A) [ 0.000000] 1157MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0007ffde [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffde [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low edge) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:80000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f79e3000 s33280 r0 d24064 u57344 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520045 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=539132b6-cde2-46f1-8bfe-f1dedad8388b ro console=ttyS0,115200 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000379fe:0007ffde) [ 0.000000] Memory: 2064088k/2097016k available (2852k kernel code, 32476k reserved, 1347k data, 416k init, 1185664k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc141b000 - 0xc1483000 ( 416 kB) [ 0.000000] .data : 0xc12c93c0 - 0xc141a100 (1347 kB) [ 0.000000] .text : 0xc1000000 - 0xc12c93c0 (2852 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2211.248 MHz processor. [ 0.008002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4422.49 BogoMIPS (lpj=8844992) [ 0.016003] pid_max: default: 32768 minimum: 301 [ 0.020041] Security Framework initialized [ 0.024008] AppArmor: AppArmor disabled by boot time parameter [ 0.028017] Mount-cache hash table entries: 512 [ 0.032142] Initializing cgroup subsys cpuacct [ 0.036008] Initializing cgroup subsys memory [ 0.040013] Initializing cgroup subsys devices [ 0.044005] Initializing cgroup subsys freezer [ 0.048005] Initializing cgroup subsys net_cls [ 0.052005] Initializing cgroup subsys blkio [ 0.056011] Initializing cgroup subsys perf_event [ 0.060033] mce: CPU supports 5 MCE banks [ 0.064059] SMP alternatives: switching to UP code [ 0.073281] Freeing SMP alternatives: 8k freed [ 0.076011] ACPI: Core revision 20110623 [ 0.080666] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.084312] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 [ 0.129540] CPU0: AMD Opteron(tm) Processor 248 HE stepping 01 [ 0.136007] Performance Events: AMD PMU driver. [ 0.136010] ... version: 0 [ 0.140009] ... bit width: 48 [ 0.144009] ... generic registers: 4 [ 0.148009] ... value mask: 0000ffffffffffff [ 0.152010] ... max period: 00007fffffffffff [ 0.156010] ... fixed-purpose events: 0 [ 0.160010] ... event mask: 000000000000000f [ 0.164178] NMI watchdog enabled, takes one hw-pmu counter. [ 0.168029] Brought up 1 CPUs [ 0.172013] Total of 1 processors activated (4422.49 BogoMIPS). [ 0.176590] devtmpfs: initialized [ 0.180329] print_constraints: dummy: [ 0.184064] NET: Registered protocol family 16 [ 0.188111] TOM: 0000000080000000 aka 2048M [ 0.192046] ACPI: bus type pci registered [ 0.200107] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX. [ 0.204015] PCI: PCI BIOS revision 2.10 entry at 0xfd71a, last bus=5 [ 0.208014] PCI: Using configuration type 1 for base access [ 0.212714] bio: create slab at 0 [ 0.220019] ACPI: Added _OSI(Module Device) [ 0.224015] ACPI: Added _OSI(Processor Device) [ 0.228015] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.232016] ACPI: Added _OSI(Processor Aggregator Device) [ 0.237096] ACPI: Interpreter enabled [ 0.240021] ACPI: (supports S0 S5) [ 0.244580] ACPI: Using IOAPIC for interrupt routing [ 0.253369] ACPI: No dock devices found. [ 0.256017] HEST: Table not found. [ 0.260019] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.265130] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) [ 0.270196] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df] [ 0.272019] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x3fff] [ 0.276019] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xf41fffff] [ 0.280019] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.284019] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.288021] pci_root PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x0000-0x0cf7] ignored [ 0.296847] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.300058] pci 0000:00:0b.0: PCI bridge to [bus 02-02] [ 0.304041] pci 0000:00:0c.0: PCI bridge to [bus 03-03] [ 0.308164] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.312026] pci 0000:00:0d.0: PCI bridge to [bus 04-04] [ 0.316047] pci 0000:00:0e.0: PCI bridge to [bus 05-05] [ 0.320162] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.333189] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.340269] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.346728] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0 [ 0.349757] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0 [ 0.356079] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. [ 0.362728] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0 [ 0.369481] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 23) *0 [ 0.373760] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 22 23) *0 [ 0.377759] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0 [ 0.384269] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. [ 0.390730] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. [ 0.394734] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *0 [ 0.401214] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0 [ 0.405770] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0 [ 0.409811] vgaarb: device added: PCI:0000:01:06.0,decodes=io+mem,owns=io+mem,locks=none [ 0.412028] vgaarb: loaded [ 0.416027] vgaarb: bridge control possible 0000:01:06.0 [ 0.420071] PCI: Using ACPI for IRQ routing [ 0.424037] pci 0000:00:01.0: no compatible bridge window for [mem 0xfec00000-0xfec00fff] [ 0.428186] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.432031] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.437050] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.444079] Switching to clocksource hpet [ 0.449621] pnp: PnP ACPI init [ 0.452693] ACPI: bus type pnp registered [ 0.458161] pnp: PnP ACPI: found 3 devices [ 0.462257] ACPI: ACPI bus type pnp unregistered [ 0.466876] PnPBIOS: Disabled by ACPI PNP [ 0.507403] pci 0000:00:01.0: BAR 1: assigned [mem 0xf4106000-0xf4106fff] [ 0.514188] pci 0000:00:09.0: PCI bridge to [bus 01-01] [ 0.519413] pci 0000:00:09.0: bridge window [mem 0xf0000000-0xf3ffffff] [ 0.526201] pci 0000:00:0b.0: PCI bridge to [bus 02-02] [ 0.531428] pci 0000:00:0c.0: PCI bridge to [bus 03-03] [ 0.536654] pci 0000:00:0d.0: PCI bridge to [bus 04-04] [ 0.541876] pci 0000:00:0d.0: bridge window [io 0x1000-0x1fff] [ 0.547970] pci 0000:00:0d.0: bridge window [mem 0xf4000000-0xf40fffff] [ 0.554756] pci 0000:00:0e.0: PCI bridge to [bus 05-05] [ 0.560088] NET: Registered protocol family 2 [ 0.564505] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.571931] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.579999] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.586984] TCP: Hash tables configured (established 131072 bind 65536) [ 0.593600] TCP reno registered [ 0.596747] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.602675] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.609123] NET: Registered protocol family 1 [ 0.613681] ACPI: PCI Interrupt Link [LUOH] enabled at IRQ 23 [ 0.672102] ACPI: PCI Interrupt Link [LUEH] enabled at IRQ 22 [ 0.677901] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.683474] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.688556] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.694127] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.699210] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.704786] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.709841] pci 0000:00:0b.0: Found enabled HT MSI Mapping [ 0.715361] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.720932] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 0.725986] pci 0000:00:0c.0: Found enabled HT MSI Mapping [ 0.731511] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.737087] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 0.742142] pci 0000:00:0d.0: Found enabled HT MSI Mapping [ 0.747668] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.753242] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.758295] pci 0000:00:0e.0: Found enabled HT MSI Mapping [ 0.763855] Unpacking initramfs... [ 1.047324] Freeing initrd memory: 9956k freed [ 1.057774] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.065727] audit: initializing netlink socket (disabled) [ 1.071136] type=2000 audit(1381756226.068:1): initialized [ 1.091916] highmem bounce pool size: 64 pages [ 1.096370] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.103031] VFS: Disk quotas dquot_6.5.2 [ 1.106982] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.113570] msgmni has been set to 1735 [ 1.117543] alg: No test for stdrng (krng) [ 1.121664] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.129053] io scheduler noop registered [ 1.132981] io scheduler deadline registered [ 1.137261] io scheduler cfq registered (default) [ 1.142126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.147717] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.154324] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.160983] ERST: Table is not found! [ 1.164647] GHES: HEST is not enabled! [ 1.168409] isapnp: Scanning for PnP cards... [ 1.525112] isapnp: No Plug & Play device found [ 1.529691] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.556207] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.582476] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.588738] Linux agpgart interface v0.103 [ 1.592972] agpgart-amd64 0000:01:06.0: AGP bridge [126f/0720] [ 1.598806] agpgart-amd64 0000:01:06.0: aperture size 4096 MB is not right, using settings from NB [ 1.610783] agpgart-amd64 0000:01:06.0: AGP aperture is 64M @ 0xf8000000 [ 1.617654] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.628219] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.633189] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.638336] mousedev: PS/2 mouse device common for all mice [ 1.643985] rtc_cmos rtc_cmos: RTC can wake from S4 [ 1.648966] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.655342] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.662050] cpuidle: using governor ladder [ 1.666150] cpuidle: using governor menu [ 1.670310] TCP cubic registered [ 1.673569] NET: Registered protocol family 10 [ 1.678550] Mobile IPv6 [ 1.680998] NET: Registered protocol family 17 [ 1.685444] Registering the dns_resolver key type [ 1.690166] Using IPI No-Shortcut mode [ 1.694013] registered taskstats version 1 [ 1.698438] rtc_cmos rtc_cmos: setting system clock to 2013-10-14 13:10:27 UTC (1381756227) [ 1.706807] Initializing network drop monitor service [ 1.712011] Freeing unused kernel memory: 416k freed [ 1.717214] Write protecting the kernel text: 2856k [ 1.722123] Write protecting the kernel read-only data: 1084k [ 1.727875] NX-protecting the kernel data: 3288k Loading, please wait... [ 1.748169] udevd[44]: starting version 175 [ 1.789184] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.831799] sky2: driver version 1.30 [ 1.855218] SCSI subsystem initialized [ 1.862985] usbcore: registered new interface driver usbfs [ 1.890213] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19 [ 1.901561] ACPI: PCI Interrupt Link [LEMA] enabled at IRQ 21 [ 1.917532] usbcore: registered new interface driver hub [ 1.923638] sky2 0000:04:00.0: Yukon-2 EC chip revision 1 [ 1.931230] usbcore: registered new device driver usb [ 1.936654] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.943884] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.048012] sky2 0000:04:00.0: No interrupt generated using MSI, switching to INTx mode. [ 2.056115] Refined TSC clocksource calibration: 2211.332 MHz. [ 2.062566] sky2 0000:04:00.0: eth0: addr 00:01:4e:01:12:25 [ 2.068143] Switching to clocksource tsc [ 2.452709] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:e0:81:54:32:66 [ 2.461059] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 2.468640] scsi0 : pata_amd [ 2.471652] scsi1 : pata_amd [ 2.474626] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3820 irq 14 [ 2.481581] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3828 irq 15 [ 2.488692] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20 [ 2.495084] scsi2 : sata_nv [ 2.497985] scsi3 : sata_nv [ 2.500874] ata3: SATA max UDMA/133 cmd 0x3850 ctl 0x3878 bmdma 0x3830 irq 20 [ 2.508006] ata4: SATA max UDMA/133 cmd 0x3858 ctl 0x387c bmdma 0x3838 irq 20 [ 2.515195] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 2.520576] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 2.527987] ehci_hcd 0000:00:02.1: debug port 1 [ 2.532530] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf4105000 [ 2.548007] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 2.553765] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.560550] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.567768] usb usb1: Product: EHCI Host Controller [ 2.572648] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd [ 2.578826] usb usb1: SerialNumber: 0000:00:02.1 [ 2.583616] hub 1-0:1.0: USB hub found [ 2.587369] hub 1-0:1.0: 10 ports detected [ 2.591548] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 2.596905] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 2.604319] ohci_hcd 0000:00:02.0: irq 23, io mem 0xf4100000 [ 2.666003] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.672782] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.680000] usb usb2: Product: OHCI Host Controller [ 2.684872] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd [ 2.691052] usb usb2: SerialNumber: 0000:00:02.0 [ 2.695844] hub 2-0:1.0: USB hub found [ 2.699601] hub 2-0:1.0: 10 ports detected [ 2.703875] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23 [ 2.710147] scsi4 : sata_nv [ 2.713056] scsi5 : sata_nv [ 2.715944] ata5: SATA max UDMA/133 cmd 0x3860 ctl 0x3880 bmdma 0x3840 irq 23 [ 2.723078] ata6: SATA max UDMA/133 cmd 0x3868 ctl 0x3884 bmdma 0x3848 irq 23 [ 2.992015] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.040007] ata5: SATA link down (SStatus 0 SControl 300) [ 3.080007] usb 2-1: new low-speed USB device number 2 using ohci_hcd [ 8.004011] ata3.00: qc timeout (cmd 0x27) [ 8.008104] ata3.00: failed to read native max address (err_mask=0x4) [ 8.014544] ata3.00: HPA support seems broken, skipping HPA handling [ 8.084006] ohci_hcd 0000:00:02.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ. [ 8.488012] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.500085] ata3.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133 [ 8.506612] ata3.00: 156250000 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 8.520085] ata3.00: configured for UDMA/133 [ 8.524448] scsi 2:0:0:0: Direct-Access ATA WDC WD800JD-75MS 10.0 PQ: 0 ANSI: 5 [ 8.844007] ata4: SATA link down (SStatus 0 SControl 300) [ 9.160008] ata6: SATA link down (SStatus 0 SControl 300) [ 9.175359] sd 2:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 9.183192] sd 2:0:0:0: [sda] Write Protect is off [ 9.188026] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 39.840030] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 39.847069] ata3.00: failed command: READ DMA [ 39.851431] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 39.851432] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 39.866027] ata3.00: status: { DRDY } [ 39.869696] ata3: hard resetting link [ 39.873357] ata3: nv: skipping hardreset on occupied port [ 40.344013] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 40.364086] ata3.00: configured for UDMA/133 [ 40.368362] ata3.00: device reported invalid CHS sector 0 [ 40.373762] ata3: EH complete