Hi Dima:

Currently config for T400 could mostly be used for T400s, except UDELAY_IO should be used instead of the default UDELAY_LAPIC, otherwise EC will be unable to access during power cycle, but become accessible after a reboot.

Have you observed any similar phenomina?

Besides, T400s has sata 5 and 6 as Esata on its back and dock.

Persmule

在 2017年04月14日 07:48, Paul Menzel via coreboot 写道:
Dear coreboot folks,


coreboot 4.6 is planned to be released on Monday, so please take ten
minutes, and build the current master branch for your board, flash it,
boot it, and upload the status to the board status repository.

And if you notice a regression, please send a message to the list or
create an issue in the issue tracker [1].

Currently it’s unknown if on Lenovo laptops [2], the TPM is still
works, when TPM support is selected in Kconfig. Please note, that there
were two regressions in the Linux Kernel, so that you should not use
Linux 4.9 or the Linux 4.11 release candidates for testing.

If somebody tested the different QEMU targets that’d be great too.


Thanks,

Paul


[1] https://ticket.coreboot.org/
[2] https://review.coreboot.org/10411