Disk read error dev=1 drive=0 sector=16
Disk read error dev=1 drive=0 sector=64
Disk read error dev=1 drive=0 sector=0
Disk read error dev=1 drive=0 sector=64
Disk read error dev=1 drive=0 sector=0
Disk read error dev=1 drive=0 sector=0
Unknown filesystem type.
Error 15: Filo not found.
EDIT: found https://www.coreboot.org/FILO but its too basic - for example, it does not tell how I could see the list of available devices. When I run "probe" command it only tells 6 messages "IDE channel X not found" (with X changing 0,0,1,1,2,2,3,3) - does not show SATA drive, despite I know that it successfully initialized, because it output its model and brand
Please give any real world FILO usage examples with a modern Linux, it will help a lot!
Best regards,
qmastery