Linux version 2.6.22-2-686 (Debian 2.6.22-4) (waldi@debian.org) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug 31 00:24:01 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 0000000060000000 (usable) 640MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 00000010 Entering add_active_range(0, 0, 393216) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 393216 early_node_map[1] active PFN ranges 0: 0 -> 393216 On node 0 totalpages: 393216 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 1280 pages used for memmap HighMem zone: 162560 pages, LIFO batch:31 DMI not present or invalid. Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: ASUS Product ID: A8NE APIC at: 0xFEE00000 Processor #0 15:15 APIC version 16 I/O APIC #1 Version 17 at 0xFC900000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Allocating PCI resources starting at 70000000 (gap: 60000000:a0000000) Built 1 zonelists. Total pages: 390144 Kernel command line: root=/dev/hda3 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fc900000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2211.367 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1550348k/1572864k available (1688k kernel code, 21364k reserved, 653k data, 244k init, 655360k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc034f000 - 0xc038c000 ( 244 kB) .data : 0xc02a62bf - 0xc03497e4 ( 653 kB) .text : 0xc0100000 - 0xc02a62bf (1688 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4429.03 BogoMIPS (lpj=8858066) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed ACPI: Core revision 20070126 ACPI Exception (tbxface-0618): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20070126] ACPI: Unable to load the System Description Tables CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02 Total of 1 processors activated (4429.03 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. Brought up 1 CPUs Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: PnP BIOS support was not detected. PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 PCI: Unable to handle 64-bit address space for bridge 0000:00:0b.0 PCI: Unable to handle 64-bit address space for bridge 0000:00:0c.0 PCI: Unable to handle 64-bit address space for bridge 0000:00:0d.0 PCI: Unable to handle 64-bit address space for bridge 0000:00:0e.0 PCI: Using IRQ router default [10de/005c] at 0000:00:09.0 PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10 PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 21 PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 20 PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 23 PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 22 PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 23 PCI BIOS passed nonexistent PCI bus 1! PCI: Cannot allocate resource region 5 of device 0000:00:01.1 NET: Registered protocol family 8 NET: Registered protocol family 20 PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: fc000000-fc8fffff PREFETCH window: 70000000-700fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. Time: tsc clocksource has been installed. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5286k freed audit: initializing netlink socket (disabled) audit(1191006556.256:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 PCI: Found disabled HT MSI Mapping on 0000:00:00.0 PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0b.0. PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 PCI: Found disabled HT MSI Mapping on 0000:00:00.0 PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0c.0. PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 PCI: Found disabled HT MSI Mapping on 0000:00:00.0 PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0d.0. PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 PCI: Found disabled HT MSI Mapping on 0000:00:00.0 PCI: MSI quirk detected. MSI disabled on chipset 0000:00:0e.0. Boot video device is 0000:01:06.0 PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: No PS/2 controller found. Probing ports directly. i8042.c: Can't read CTR while initializing i8042. i8042: probe of i8042 failed with error -5 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 244k freed thermal: Unknown symbol acpi_processor_set_thermal_limit Clocksource tsc unstable (delta = 504074564 ns) Time: pit clocksource has been installed. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb SCSI subsystem initialized libata version 2.21 loaded. ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 21, io mem 0xfc901000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 20, io mem 0xfc905000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected sata_nv 0000:00:07.0: version 3.4 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xf8856480 ctl 0xf88564a0 bmdma 0x00011030 irq 23 ata2: SATA max UDMA/133 cmd 0xf8856580 ctl 0xf88565a0 bmdma 0x00011038 irq 23 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ata1: SATA link down (SStatus 0 SControl 300) usb 1-1: new low speed USB device using ohci_hcd and address 2 ata2: SATA link down (SStatus 0 SControl 300) sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0xf8830480 ctl 0xf88304a0 bmdma 0x00011040 irq 22 ata4: SATA max UDMA/133 cmd 0xf8830580 ctl 0xf88305a0 bmdma 0x00011048 irq 22 usb 1-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech Logitech USB Keyboard as /class/input/input0 input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 010f1:2891 bound to 0000:00:0a.0 NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 162 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller PCI: Setting latency timer of device 0000:00:06.0 to 64 ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: ST315323A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: max request size: 128KiB hda: 30008475 sectors (15364 MB) w/512KiB Cache, CHS=29770/16/63, UDMA(66) hda: cache flushes not supported hda: hda1 hda2 hda3 Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udev: renamed network interface eth0 to eth1 i2c-adapter i2c-0: nForce2 SMBus adapter at 0xc80 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1400 Adding 979956k swap on /dev/hda2. Priority:-1 extents:1 across:979956k EXT3 FS on hda3, internal journal loop: module loaded device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 10 lo: Disabled Privacy Extensions nforce: no IPv6 routers present