Initializing cgroup subsys cpuset Linux version 2.6.26.6-49.fc8 (mockbuild@x86-2.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Oct 17 15:59:36 EDT 2008 PAT disabled. Not yet verified on this CPU type. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 00000000000e1000 (reserved) BIOS-e820: 00000000000e1000 - 00000000000f0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007bdf0000 (usable) BIOS-e820: 000000007bdf0000 - 000000007bf00000 (reserved) WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 1MB of RAM. ------------[ cut here ]------------ WARNING: at arch/x86/kernel/cpu/mtrr/main.c:706 mtrr_trim_uncached_memory+0x10f/0x174() (Not tainted) Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.26.6-49.fc8 #1 [] warn_on_slowpath+0x47/0x72 [] ? _spin_unlock_irqrestore+0x10/0x14 [] ? _spin_unlock_irqrestore+0x10/0x14 [] ? release_console_sem+0x185/0x18d [] ? vprintk+0x336/0x343 [] ? vprintk+0x336/0x343 [] ? generic_get_mtrr+0x71/0x11f [] ? printk+0x15/0x17 [] mtrr_trim_uncached_memory+0x10f/0x174 [] ? mtrr_bp_init+0x20e/0x216 [] setup_arch+0x2a6/0x705 [] ? printk+0x15/0x17 [] ? printk+0x15/0x17 [] start_kernel+0x64/0x2da [] __init_begin+0x8/0xa ======================= ---[ end trace 4eaa2a86a8e2da22 ]--- update e820 for mtrr modified physical RAM map: modified: 0000000000000000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 00000000000e1000 (reserved) modified: 00000000000e1000 - 00000000000f0000 (usable) modified: 00000000000f0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000007bc00000 (usable) modified: 000000007bc00000 - 000000007bf00000 (reserved) 1084MB HIGHMEM available. 896MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 506880) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 506880 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 506880 On node 0 totalpages: 506880 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2168 pages used for memmap HighMem zone: 275336 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.4 present. Using APIC driver default ACPI: RSDP 000FF330, 0014 (r0 CORE ) ACPI: RSDT 7BEF0024, 0034 (r1 CORE RSDT 0 CORE 0) ACPI: FACP 7BEF33E7, 00F4 (r1 VX800 LNXBACPI 0 LXB 0) ACPI: DSDT 7BEF00C0, 3327 (r1 VIA ACPI 1 INTL 20051117) ACPI: FACS 7BEF0080, 0040 ACPI: APIC 7BEF34DB, 0066 (r1 CORE MADT 0 CORE 0) ACPI: HPET 7BEF3541, 0038 (r1 CORE AMD64 0 CORE 0) ACPI: SSDT 7BEF3579, 01A7 (r1 VIA PMSVR 1 INTL 20051117) ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 5, version 3, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 2 I/O APICs ACPI: HPET id: 0x102282a0 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7bf00000:84100000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 00000000000e1000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 SMP: Allowing 1 CPUs, 0 hotplug CPUs PERCPU: Allocating 41384 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 502920 Kernel command line: ro root=LABEL=/ rhgb quiet mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) mapped IOAPIC to ffff9000 (fecc0000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07cb000 soft=c07ab000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1596.120 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2001744k/2027520k available (2254k kernel code, 24376k reserved, 1180k data, 284k init, 1110016k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0761000 - 0xc07a8000 ( 284 kB) .data : 0xc0633847 - 0xc075ab88 (1180 kB) .text : 0xc0400000 - 0xc0633847 (2254 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 3194.08 BogoMIPS (lpj=1597042) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 128K (64 bytes/line) Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 19k freed ACPI: Core revision 20080321 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Centaur VIA C7-M Processor 1600MHz stepping 00 Brought up 1 CPUs Total of 1 processors activated (3194.08 BogoMIPS). sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=180 bytes sizeof(task_struct)=3188 bytes CPU0 attaching sched-domain: domain 0: span 0 groups: 0 net_namespace: 660 bytes Booting paravirtualized kernel on bare hardware Time: 23:51:53 Date: 12/15/99 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using configuration type 1 for base access Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 19 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 32-bit timers, 14318180 Hz system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:02: iomem range 0xfecc0000-0xfecc0fff has been reserved system 00:03: iomem range 0xfee00000-0xfee00fff has been reserved system 00:03: iomem range 0xfec00000-0xfec00fff has been reserved system 00:11: ioport range 0x3e0-0x3e7 has been reserved system 00:11: ioport range 0x4d0-0x4d1 has been reserved system 00:11: ioport range 0x400-0x47f has been reserved system 00:11: ioport range 0x500-0x50f has been reserved system 00:11: iomem range 0xfed10000-0xfed100ff has been reserved system 00:12: iomem range 0x0-0x9ffff could not be reserved system 00:12: iomem range 0xe0000-0xfffff could not be reserved system 00:12: iomem range 0x100000-0x7bffffff could not be reserved PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:13.0 IO window: 1000-1fff MEM window: 0xfd000000-0xfd0fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31 PCI: Setting latency timer of device 0000:00:03.0 to 64 ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 39 (level, low) -> IRQ 39 PCI: Setting latency timer of device 0000:00:03.1 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Switched to high resolution mode on CPU 0 Freeing initrd memory: 3017k freed eps: Detected VIA Model D C7-M eps: Current voltage = 988mV eps: Current multiplier = 8 eps: Highest voltage = 988mV eps: Highest multiplier = 8 eps: Lowest voltage = 796mV eps: Lowest multiplier = 4 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) type=2000 audit(4101061912.714:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1749 SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 942ED0CAD7D49A2 - key was been created 1418176442 seconds in future - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:01.0: Boot video device PCI: VIA PCI bridge detected.Disabling DAC. PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie02] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie02] PCI: Setting latency timer of device 0000:00:03.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.1:pcie00] Allocate Port Service[0000:00:03.1:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input1 ACPI: Sleep Button (CM) [SLPB] ACPI: Invalid PBLK length [7] ACPI: ACPI0007:00 is registered as cooling_device0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /class/input/input2 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 15:948:908 hash matches device port Freeing unused kernel memory: 284k freed Write protecting the kernel text: 2256k Write protecting the kernel read-only data: 960k input: AT Translated Set 2 keyboard as /class/input/input3 ACPI: PCI Interrupt 0000:00:10.4[D] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: debug port 1 ehci_hcd 0000:00:10.4: irq 23, io mem 0xfd107000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.26.6-49.fc8 ehci_hcd usb usb1: SerialNumber: 0000:00:10.4 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 20, io base 0x00002000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.26.6-49.fc8 uhci_hcd usb usb2: SerialNumber: 0000:00:10.0 ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 22, io base 0x00002020 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.26.6-49.fc8 uhci_hcd usb usb3: SerialNumber: 0000:00:10.1 ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x00002040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.26.6-49.fc8 uhci_hcd usb usb4: SerialNumber: 0000:00:10.2 input: ImPS/2 Generic Wheel Mouse as /class/input/input4 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. pata_via 0000:00:0f.0: version 0.3.3 scsi0 : pata_via scsi1 : pata_via ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2060 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2068 irq 15 ata2.00: HPA detected: current 312579695, native 312581808 ata2.00: ATA-7: Maxtor 6G160P0, KA201V00, max UDMA/133 ata2.00: 312579695 sectors, multi 0: LBA48 ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA Maxtor 6G160P0 KA20 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 312579695 512-byte hardware sectors (160041 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] 312579695 512-byte hardware sectors (160041 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > sd 1:0:0:0: [sda] Attached SCSI disk Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. type=1404 audit(4101061930.814:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 228192 rules. SELinux: 8192 avtab hash slots, 228192 rules. SELinux: 8 users, 12 roles, 2519 types, 116 bools, 1 sens, 1024 cats SELinux: 67 classes, 228192 rules SELinux: class peer not defined in policy SELinux: class capability2 not defined in policy SELinux: permission open in class dir not defined in policy SELinux: permission open in class file not defined in policy SELinux: permission open in class chr_file not defined in policy SELinux: permission open in class blk_file not defined in policy SELinux: permission open in class fifo_file not defined in policy SELinux: permission recvfrom in class node not defined in policy SELinux: permission sendto in class node not defined in policy SELinux: permission ingress in class netif not defined in policy SELinux: permission egress in class netif not defined in policy SELinux: permission setfcap in class capability not defined in policy SELinux: permission forward_in in class packet not defined in policy SELinux: permission forward_out in class packet not defined in policy SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda3, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: policy loaded with handle_unknown=allow type=1403 audit(4101061931.444:3): policy loaded auid=4294967295 ses=4294967295 sd 1:0:0:0: Attached scsi generic sg0 type 0 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:00:0c.0 [1106:95d0] (rev 10) ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:0c.0 to 64 Registered led device: mmc0 mmc0: SDHCI at 0xfd105000 irq 22 DMA PCI: Setting latency timer of device 0000:00:0c.0 to 64 Registered led device: mmc1 mmc1: SDHCI at 0xfd106000 irq 22 DMA input: PC Speaker as /class/input/input5 parport_pc 00:0d: activated parport_pc 00:0d: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] parport_pc 00:0e: activated parport_pc 00:0e: reported by Plug and Play ACPI parport1: PC-style at 0x278 (0x678), irq 5 [PCSPP,TRISTATE] VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.14 Copyright (c) 2002, 2003 VIA Networking Technologies, Inc. Copyright (c) 2004 Red Hat Inc. ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 19 (level, low) -> IRQ 19 eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter eth0: Ethernet Address: 00:64:13:E0:04:38 ns558 00:0f: activated gameport: NS558 PnP Gameport is pnp00:0f/gameport0, io 0x200, speed 784kHz udev: renamed network interface eth0 to eth1 mpu401 00:10: unable to assign resources mpu401: probe of 00:10 failed with error -16 MPU-401 device not found or device busy ACPI: PCI Interrupt 0000:00:14.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:14.0 to 64 PCI: Disallowing DAC for device 0000:00:14.0 floppy0: no floppy controllers found SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 mtrr: no more MTRRs available device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda3, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2048248k swap on /dev/sda6. Priority:-1 extents:1 across:2048248k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts warning: process `kudzu' used the deprecated sysctl system call with 1.23. Marking TSC unstable due to: cpufreq changes. Clocksource tsc unstable (delta = -69583470 ns) Velocity is AUTO mode RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. mtrr: no more MTRRs available Velocity is AUTO mode eth1: no IPv6 routers present hda-intel: Invalid position buffer, using LPIB read method instead.