Thanks Vim.
Currently I am not able to get any serial prints out on my reference board.
My board is based on Intel ISX board based on Baytrail-I soc E3825 given below.
I have built coreboot for this, but unable to get serial prints.
How I should debug this further.
Regards
Mayuri
From: Wim Vervoorn [mailto:wvervoorn@eltan.com]
Sent: 24 May 2016 13:26
To: Mayuri Tendulkar <mayuri.tendulkar@aricent.com>
Subject: Re: Query regarding coreboot for new intel customized board
Hello Mayuri,
If your rom image is the same it could be due to the lack of support for the flash device you are using. The MRC cache is preserved in flash so you need to be able to write it.
For the others the numbers etc you mention are informational for the OS. They are not strictly required but the OS builds a registry of the items it retrieves from the SMBIOS. If you don’t require this you could also disable the functionality.
Best Regards,
Wim Vervoorn
Eltan B.V.
Ambachtstraat 23
5481 SM Schijndel
The Netherlands
T : +31-(0)73-594 46 64
"THIS MESSAGE CONTAINS CONFIDENTIAL INFORMATION. UNLESS YOU ARE THE INTENDED RECIPIENT OF THIS MESSAGE, ANY USE OF THIS MESSAGE IS STRICTLY PROHIBITED. IF YOU HAVE RECEIVED THIS MESSAGE IN ERROR, PLEASE IMMEDIATELY NOTIFY THE SENDER BY TELEPHONE +31-(0)73-5944664 OR REPLY EMAIL, AND IMMEDIATELY DELETE THIS MESSAGE AND ALL COPIES."
From: coreboot [mailto:coreboot-bounces@coreboot.org] On Behalf Of Mayuri Tendulkar
Sent: Tuesday, May 24, 2016 7:26 AM
To: coreboot <coreboot@coreboot.org>
Subject: [coreboot] Query regarding coreboot for new intel customized board
Hi team
I am working on building coreboot for one of our customized board. This is based on Intel ISX board reference design, reference can be taken as Minnowboard or BayleyBay CRB.
As per documentation given under coreboot, I created folder with my board name under src/intel/mainboard/xxx and did changes required.
If I tried the coreboot with these changes on minnowboard, it got stuck at FSP MRC Cache not found.
But if the same code changes I copied under src/intel/mainboard/minnowmax and built, it booted fine.
I would like to know what is the importance of these board names, SMBIOS table name, serial no which are defined for Minnowmax.
Is there some master registry where all these are stored, and if any new entry comes, how we should add it.
Regards
Mayuri
"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."
"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."
--
coreboot mailing list: coreboot@coreboot.org
https://www.coreboot.org/mailman/listinfo/coreboot