Can you try
I’m just back to office, Please let me
ping NV again about MCP55.
Thanks
Yinghai Lu
From:
bxshi@msik.com.cn [mailto:bxshi@msik.com.cn]
Sent: Monday, September 18, 2006
4:24 AM
To: yinghailu@gmail.com
Cc: patricklin@msi.com.tw;
linuxbios@linuxbios.org
Subject: MSI ms9282 with etherboot
restart again and again
Dear Dr. Lu,
I tried to boot kernel on ide hdd
with etherboot , but after it shown “Jumping to entry point ” , it
restart again and again. (the log is below) ? what maybe the problem?
And is there any good news for Nvidia
mcp55?
Thanks.
bxshi
Etherboot
Drivers: TG3 FILO Images: NBI ELF
Protocols: DHCP TFTP
Relocating _text from: [000100e0,000682d0) to
[3fea7e10,3ff00000)
Boot from (N)etwork (D)isk or (Q)uit?
Probing pci nic...
Probing isa nic...
Probing pci disk...
[FILO]FILO version
Press <Enter> for default boot, or <Esc> for
boot prompt... timed out
boot: hda1:/vmlinuz-
hda: LBA: FUJITSU MHV2040AT
Mounted ext2fs
Found Linux version
Loading kernel... ok
Loading initrd... ok
Jumping to entry point...
INIT detected from ---- {APICID = 00 NODEID = 00
COREID = 00} ---
Issuing SOFT_RESET...