Below is the output with the no_smp patch and the previous patch. Is there another problem since the payload is not being loaded?
coreboot-2.3 Tue Oct 20 16:46:25 MDT 2009 starting... Enabling routing table for node 00 done. Enabling UP settings Disabling read/write/fill probes for UP... done. coherent_ht_finalize done started ap apicid: SBLink=00 NC node|link=00 entering ht_optimize_link pos=0x8a, unfiltered freq_cap=0x8075 pos=0x8a, filtered freq_cap=0x35 pos=0xce, unfiltered freq_cap=0x35 freq_cap1=0x35, freq_cap2=0x15 dev1 old_freq=0x0, freq=0x4, needs_reset=0x1 dev2 old_freq=0x0, freq=0x4, needs_reset=0x1 width_cap1=0x11, width_cap2=0x11 dev1 input ln_width1=0x4, ln_width2=0x4 dev1 input width=0x1 dev1 output ln_width1=0x4, ln_width2=0x4 dev1 input|output width=0x11 old dev1 input|output width=0x11 dev2 input|output width=0x11 old dev2 input|output width=0x11 entering ht_optimize_link pos=0xd2, unfiltered freq_cap=0x35 pos=0xce, unfiltered freq_cap=0x1 pos=0xce, filtered freq_cap=0x1 freq_cap1=0x15, freq_cap2=0x1 dev1 old_freq=0x0, freq=0x0, needs_reset=0x0 dev2 old_freq=0x0, freq=0x0, needs_reset=0x0 width_cap1=0x0, width_cap2=0x0 dev1 input ln_width1=0x3, ln_width2=0x3 dev1 input width=0x0 dev1 output ln_width1=0x3, ln_width2=0x3 dev1 input|output width=0x0 old dev1 input|output width=0x0 dev2 input|output width=0x0 old dev2 input|output width=0x0 ht reset -
coreboot-2.3 Tue Oct 20 16:46:25 MDT 2009 starting... Enabling routing table for node 00 done. Enabling UP settings Disabling read/write/fill probes for UP... done. coherent_ht_finalize done started ap apicid: SBLink=00 NC node|link=00 entering ht_optimize_link pos=0x8a, unfiltered freq_cap=0x8075 pos=0x8a, filtered freq_cap=0x35 pos=0xce, unfiltered freq_cap=0x35 freq_cap1=0x35, freq_cap2=0x15 dev1 old_freq=0x4, freq=0x4, needs_reset=0x0 dev2 old_freq=0x4, freq=0x4, needs_reset=0x0 width_cap1=0x11, width_cap2=0x11 dev1 input ln_width1=0x4, ln_width2=0x4 dev1 input width=0x1 dev1 output ln_width1=0x4, ln_width2=0x4 dev1 input|output width=0x11 old dev1 input|output width=0x11 dev2 input|output width=0x11 old dev2 input|output width=0x11 entering ht_optimize_link pos=0xd2, unfiltered freq_cap=0x35 pos=0xce, unfiltered freq_cap=0x1 pos=0xce, filtered freq_cap=0x1 freq_cap1=0x15, freq_cap2=0x1 dev1 old_freq=0x0, freq=0x0, needs_reset=0x0 dev2 old_freq=0x0, freq=0x0, needs_reset=0x0 width_cap1=0x0, width_cap2=0x0 dev1 input ln_width1=0x3, ln_width2=0x3 dev1 input width=0x0 dev1 output ln_width1=0x3, ln_width2=0x3 dev1 input|output width=0x0 old dev1 input|output width=0x0 dev2 input|output width=0x0 old dev2 input|output width=0x0 SMBus controller enabled Ram1.00 setting up CPU00 northbridge registers done. Ram2.00 Enabling dual channel memory Registered 166Mhz RAM end at 0x00100000 kB Lower RAM end at 0x00100000 kB Ram3 Before starting clocks: Before memreset: cpu is pre_c0 after first udelay after second udelay Before controllers loop: ECC enabled Before 2nd controllers loop: Initializing memory: done Before hole: Ram4 v_esp=000cedb8 testx = 5a5a5a5a Copying data from cache to RAM -- switching to use RAM as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Jumping to image. Check CBFS header at fffeffe0 magic is 4f524243 Found CBFS header at fffeffe0 Check fallback/coreboot_ram Stage: load fallback/coreboot_ram @ 1048576/245760 bytes, enter @ 100000 Stage: done loading. Jumping to image. POST: 0x80 POST: 0x39 coreboot-2.3 Tue Oct 20 16:46:25 MDT 2009 booting... POST: 0x40 Enumerating buses... Show all devs...Before Device Enumeration. Root Device: enabled 1, 0 resources APIC_CLUSTER: 0: enabled 1, 0 resources APIC: 00: enabled 1, 0 resources PCI_DOMAIN: 0000: enabled 1, 0 resources PCI: 00:18.0: enabled 1, 0 resources PCI: 00:00.0: enabled 1, 0 resources PCI: 00:00.1: enabled 1, 0 resources PCI: 00:01.0: enabled 1, 0 resources PCI: 00:01.1: enabled 1, 0 resources PCI: 00:00.0: enabled 1, 0 resources PCI: 00:00.0: enabled 1, 0 resources PCI: 00:00.1: enabled 1, 0 resources PCI: 00:00.2: enabled 0, 0 resources PCI: 00:01.0: enabled 0, 0 resources PCI: 00:06.0: enabled 1, 0 resources PCI: 00:01.0: enabled 1, 0 resources PNP: 002e.0: enabled 0, 3 resources PNP: 002e.1: enabled 0, 2 resources PNP: 002e.2: enabled 0, 2 resources PNP: 002e.3: enabled 1, 2 resources PNP: 002e.4: enabled 0, 0 resources PNP: 002e.5: enabled 0, 0 resources PNP: 002e.6: enabled 1, 3 resources PNP: 002e.7: enabled 0, 0 resources PNP: 002e.8: enabled 0, 0 resources PNP: 002e.9: enabled 0, 0 resources PNP: 002e.a: enabled 0, 0 resources PCI: 00:01.1: enabled 1, 0 resources PCI: 00:01.2: enabled 1, 0 resources PCI: 00:01.3: enabled 1, 0 resources I2C: 00:70: enabled 1, 0 resources I2C: 00:2c: enabled 1, 0 resources I2C: 00:50: enabled 1, 0 resources I2C: 00:51: enabled 1, 0 resources I2C: 00:52: enabled 1, 0 resources I2C: 00:53: enabled 1, 0 resources I2C: 00:54: enabled 1, 0 resources I2C: 00:55: enabled 1, 0 resources I2C: 00:56: enabled 1, 0 resources I2C: 00:57: enabled 1, 0 resources PCI: 00:01.5: enabled 0, 0 resources PCI: 00:01.6: enabled 1, 0 resources PCI: 00:18.1: enabled 1, 0 resources PCI: 00:18.2: enabled 1, 0 resources PCI: 00:18.3: enabled 1, 0 resources PCI: 00:19.0: enabled 1, 0 resources PCI: 00:19.1: enabled 1, 0 resources PCI: 00:19.2: enabled 1, 0 resources PCI: 00:19.3: enabled 1, 0 resources Compare with tree... Root Device: enabled 1, 0 resources APIC_CLUSTER: 0: enabled 1, 0 resources APIC: 00: enabled 1, 0 resources PCI_DOMAIN: 0000: enabled 1, 0 resources PCI: 00:18.0: enabled 1, 0 resources PCI: 00:00.0: enabled 1, 0 resources PCI: 00:00.1: enabled 1, 0 resources PCI: 00:01.0: enabled 1, 0 resources PCI: 00:01.1: enabled 1, 0 resources PCI: 00:00.0: enabled 1, 0 resources PCI: 00:00.0: enabled 1, 0 resources PCI: 00:00.1: enabled 1, 0 resources PCI: 00:00.2: enabled 0, 0 resources PCI: 00:01.0: enabled 0, 0 resources PCI: 00:06.0: enabled 1, 0 resources PCI: 00:01.0: enabled 1, 0 resources PNP: 002e.0: enabled 0, 3 resources PNP: 002e.1: enabled 0, 2 resources PNP: 002e.2: enabled 0, 2 resources PNP: 002e.3: enabled 1, 2 resources PNP: 002e.4: enabled 0, 0 resources PNP: 002e.5: enabled 0, 0 resources PNP: 002e.6: enabled 1, 3 resources PNP: 002e.7: enabled 0, 0 resources PNP: 002e.8: enabled 0, 0 resources PNP: 002e.9: enabled 0, 0 resources PNP: 002e.a: enabled 0, 0 resources PCI: 00:01.1: enabled 1, 0 resources PCI: 00:01.2: enabled 1, 0 resources PCI: 00:01.3: enabled 1, 0 resources I2C: 00:70: enabled 1, 0 resources I2C: 00:2c: enabled 1, 0 resources I2C: 00:50: enabled 1, 0 resources I2C: 00:51: enabled 1, 0 resources I2C: 00:52: enabled 1, 0 resources I2C: 00:53: enabled 1, 0 resources I2C: 00:54: enabled 1, 0 resources I2C: 00:55: enabled 1, 0 resources I2C: 00:56: enabled 1, 0 resources I2C: 00:57: enabled 1, 0 resources PCI: 00:01.5: enabled 0, 0 resources PCI: 00:01.6: enabled 1, 0 resources PCI: 00:18.1: enabled 1, 0 resources PCI: 00:18.2: enabled 1, 0 resources PCI: 00:18.3: enabled 1, 0 resources PCI: 00:19.0: enabled 1, 0 resources PCI: 00:19.1: enabled 1, 0 resources PCI: 00:19.2: enabled 1, 0 resources PCI: 00:19.3: enabled 1, 0 resources scan_static_bus for Root Device APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled APIC_CLUSTER: 0 scanning... PCI: 00:18.3 siblings=0 CPU: APIC: 00 enabled PCI_DOMAIN: 0000 scanning... PCI: pci_scan_bus for bus 00 POST: 0x24 PCI: 00:18.0 [1022/1100] bus ops PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] ops PCI: 00:18.3 [1022/1103] enabled PCI: 00:18.4, bad id 0xffffffff PCI: 00:18.5, bad id 0xffffffff PCI: 00:18.6, bad id 0xffffffff PCI: 00:18.7, bad id 0xffffffff Disabling static device: PCI: 00:19.0 Disabling static device: PCI: 00:19.1 Disabling static device: PCI: 00:19.2 Disabling static device: PCI: 00:19.3 PCI: 00:19.4, bad id 0xffffffff PCI: 00:19.5, bad id 0xffffffff PCI: 00:19.6, bad id 0xffffffff PCI: 00:19.7, bad id 0xffffffff PCI: 00:1a.0, bad id 0xffffffff PCI: 00:1b.0, bad id 0xffffffff PCI: 00:1c.0, bad id 0xffffffff PCI: 00:1d.0, bad id 0xffffffff PCI: 00:1e.0, bad id 0xffffffff PCI: 00:1f.0, bad id 0xffffffff POST: 0x25