coreboot January 2010

coreboot@coreboot.org

58 participants
340 discussions

[PATCH] Update LinuxBIOS/coreboot support in memtest86 3.5
by Stefan Reinauer 18 Feb '10

18 Feb '10

Hi, the attached patch does the following: - renames LinuxBIOS to coreboot; in addition you need to mv linuxbios.c coreboot.c and mv linuxbios_tables.h coreboot_tables.h - fixes cross compilation with an i386-elf- cross toolchain. i.e. use $(OBJCOPY) instead of objcopy, add $(CROSS) - instead of preprocessing bootsect.S into bootsect.s, the intermediate file is now called bootsect.pre.s. This fixes compilation of memtest86+ on case insensitive filesystems (like NTFS and HFS+) - Drop unused HWRPB coreboot table type - Add support for coreboot table forward. The coreboot table may live somewhere else in memory, in which case there's only a "forwarder" in the lower 1MB of memory. Best regards, Stefan -- coresystems GmbH . Brahmsstr. 16 . D-79104 Freiburg i. Br. Tel.: +49 761 7668825 . Fax: +49 761 7664613 Email: info(a)coresystems.de . http://www.coresystems.de/ Registergericht: Amtsgericht Freiburg . HRB 7656 Geschäftsführer: Stefan Reinauer . Ust-IdNr.: DE245674866

3 3

It's not just v2 anymore
by Stefan Reinauer 11 Feb '10

11 Feb '10

See patch :-) -- coresystems GmbH . Brahmsstr. 16 . D-79104 Freiburg i. Br. Tel.: +49 761 7668825 . Fax: +49 761 7664613 Email: info(a)coresystems.de . http://www.coresystems.de/ Registergericht: Amtsgericht Freiburg . HRB 7656 Geschäftsführer: Stefan Reinauer . Ust-IdNr.: DE245674866

4 5

LinuxBIOS V1 ?!
by Tyson Sawyer 03 Feb '10

03 Feb '10

Hello, A small voice from the distant past here. I have a custom system using LinuxBIOS V1. Yes! 1! This is a PIII/440BX based system. We have found that we can boot 2.6.23-17, but can not boot 2.6.24. Investigation using characters posted on the serial port suggest that we are starting the kernel and getting to about the point where the clock speed of the CPU and then it just stops as far as we can tell. We've found that if we put in more output to the serial port, it dies earlier in the code. We can't be sure, bit it appears that it might be some sort of a time based problem. It dies after a certain amount of time and if we use that time by polling characters out the serial port, then we don't get as far through the code before death. One thought that almost fits the facts is that a interrupt might be occurring and not handled properly. But it happens that the CPU clock speed code disables interrupts and this is where it is dying. There seems to have been a number of changes in 2.6.24 to support booting kernels in virtual machines and to merge ia64 and ia32 under x86. Some notes were added about 32 bit boot loaders that reference LinuxBIOS. However, we've been unable to find what it is that we are doing wrong. We have grep'ed the internet and browsed through the CoreBoot email archives, but failed to find anything that might have been in either "place". Anyone out there have any suggestions or know what happened during 2.6.24 development that might have changed the requirements for successfully starting a kernel? Thanks! Ty -- Tyson D Sawyer iRobot Corporation Lead Systems Engineer Government & Industrial Robotics tsawyer(a)irobot.com Robots for the Real World 781-418-3329 http://www.irobot.com

5 6

arima irq issues
by Hugh Greenberg 03 Feb '10

03 Feb '10

Hello again. I still have issues with the ARIMA. I am now getting errors from Linux regarding IRQs and the MP table. I've tried various Linux options and none of them have helped. This seems to be preventing the ethernet and myrinet cards from functioning. Here is the relevant output: pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled disabled boot interrupts on PCI device 0x1022:0x7450 pci 0000:00:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled disabled boot interrupts on PCI device 0x1022:0x7450 pci 0000:00:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC boot interrupts on PCI device 0x1022:0x746b already disabled pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled �serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:00:04.6: can't find IRQ for PCI INT B; probably buggy MP table brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:03:00.0: can't find IRQ for PCI INT D; probably buggy MP table ohci_hcd 0000:03:00.0: Found HC with no IRQ. Check BIOS/PCI 0000:03:00.0 setup! ohci_hcd 0000:03:00.0: init 0000:03:00.0 fail, -19 ohci_hcd 0000:03:00.1: can't find IRQ for PCI INT D; probably buggy MP table ohci_hcd 0000:03:00.1: Found HC with no IRQ. Check BIOS/PCI 0000:03:00.1 setup! ohci_hcd 0000:03:00.1: init 0000:03:00.1 fail, -19 uhci_hcd: USB Universal Host Controller Interface driver PNP: No PS/2 controller found. Probing ports directly. Clocksource tsc unstable (delta = 148473685 ns) serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel(a)redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 5:661:239 rtc_cmos rtc_cmos: setting system clock to 2009-12-22 17:12:30 UTC (1261501950) Initalizing network drop monitor service Freeing unused kernel memory: 1324k freed Write protecting the kernel read-only data: 6344k Welcome to Fedora Press 'I' to enter interactive startup. Starting udev: [ OK ] Setting hostname m91: [ OK ] Setting up Logical Volume Management: [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling /etc/fstab swaps: [ OK ] Entering non-interactive startup Starting gm... Warning: /dev/gm* devices were not created, doing it now... active mapper... done. Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed; no link present. Check cable? [FAILED] Bringing up interface myri0: Determining IP information for myri0...RTNETLINK answers: Input/output error Any ideas? Thanks. -- Hugh Greenberg

3 5

MSC board CXB-A945M
by Wolfgang Schaefer 03 Feb '10

03 Feb '10

Hello all, I'm trying to get coreboot to work on a MSC COM Express Module: CXB-A945M. < http://www.msc-ge.com/en/produkte/com/com_express/cxb_a945m.html > My knowledge from this board is: CPU: Intel Atom N270 1.6GHz Northbridge 945GME Southbridge ICH7M DH superIOchip FDC37N972 PhoenixBIOS: BIOS Version V2.00 HW revision 1.1 Please find attached the output from flashrom and superiotool. The current PhoenixBIOS takes nearly 15 seconds to boot. This is too much for us! We aspire to boot linux and start our application under 20 seconds. What we need from the board environment is: USB AC97 LAN LVDS PATA for CF-Card I2C RTC Now my question: can I get coreboot to work with this board and what can/must I do? Best Regards, Wolfgang -- ------------------------------------------------------------ Dipl. Ing. (FH) Wolfgang Schaefer Senior System Engineer Funkwerk Avionics GmbH Riedweg 5, D-89081 ULM / Germany Phone: +49-731-93697-50 Fax: +49-731-93697-79 E-mail: wolfgang.schaefer(a)funkwerk-avionics.com Internet: www.funkwerk-avionics.com ------------------------------------------------------------ Sitz der Gesellschaft / Registered Office: Gewerbestrasse 2, D-86875 Waal/Germany Handelsregister / Commercial Register: Amtsgericht Kempten HRB 5360 Geschäftsführer / Managing Director: Dr. Thomas Wittig ------------------------------------------------------------ flashrom v0.9.1-runknown No coreboot table found. DMI string 0: "MSC Vertriebs GmbH DCN" DMI string 1: "CX-945 CPU Board" DMI string 2: "Not Applicable " DMI string 3: "MSC Vertriebs GmbH " DMI string 4: "CX-945 " DMI string 5: "2.0 " Found chipset "Intel ICH7MDH", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0x120460: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x00: 0x0004 (SPIS) 0x02: 0x4140 (SPIC) 0x04: 0x00000000 (SPIA) 0x08: 0xc21514c2 (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x00000000 (SPID1+4) 0x18: 0x00000000 (SPID2) 0x1c: 0x00000000 (SPID2+4) 0x20: 0x00000000 (SPID3) 0x24: 0x00000000 (SPID3+4) 0x28: 0x00000000 (SPID4) 0x2c: 0x00000000 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x00000000 (SPID6) 0x3c: 0x00000000 (SPID6+4) 0x40: 0x00000000 (SPID7) 0x44: 0x00000000 (SPID7+4) 0x50: 0x00000000 (BBAR) 0x54: 0x0006 (PREOP) 0x56: 0x463b (OPTYPE) 0x58: 0x05d80302 (OPMENU) 0x5c: 0xc79f0190 (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) 0x6c: 0x00000000 (PBR3) Programming OPCODES... program_opcodes: preop=0006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: SPI. Calibrating delay loop... 776M loops per second, 100 myus = 195 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25F512B, 64 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25FS010, 128 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT25FS040, 512 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF041, 512 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT26F004, 512 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT29C512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: RDID returned 0xc2 0x20 0x15 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A25L40PU, 512 KB: RDID returned 0xc2 0x20 0x15 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for AMIC A29002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for EMST F49B002UA, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B05T, 64 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B10, 128 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B10T, 128 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B20, 256 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B20T, 256 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B40, 512 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B40T, 512 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B80, 1024 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B80T, 1024 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B16, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B16T, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B32, 4096 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B32T, 4096 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B64, 8192 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25B64T, 8192 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25D16, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F05, 64 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F10, 128 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F20, 256 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F40, 512 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F80, 1024 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F16, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Eon EN25F32, 4096 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Intel 82802AC, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Macronix MX25L512, 64 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L1005, 128 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L2005, 256 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L4005, 512 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address 0xffe00000. Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Numonyx M25PE20, 256 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Numonyx M25PE40, 512 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV010, 128 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV020, 256 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV040, 512 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm25LV512, 64 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for PMC Pm49FL004, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Sharp LHF00L04, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Spansion S25FL008A, 1024 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF016B, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF032B, 4096 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF040.REMS, 512 KB: REMS returned c2 14. probe_spi_rems: id1 0xc2, id2 0x14 Probing for SST SST25VF040B, 512 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST25VF040B.REMS, 512 KB: REMS returned c2 14. probe_spi_rems: id1 0xc2, id2 0x14 Probing for SST SST25VF080B, 1024 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for SST SST28SF040A, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF003A/B, 384 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF004A/B, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF004C, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF008A, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF008C, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF016C, 2048 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for SST SST49LF020, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P05.RES, 64 KB: RDID returned 0xc2 0x20 0x15. Probing for ST M25P10-A, 128 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P10.RES, 128 KB: RDID returned 0xc2 0x20 0x15. Probing for ST M25P20, 256 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P40, 512 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P40-old, 512 KB: RDID returned 0xc2 0x20 0x15. Probing for ST M25P80, 1024 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P16, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P32, 4096 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P64, 8192 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M25P128, 16384 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for ST M29F002B, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080B, 1024 KB: skipped. Host bus type SPI and chip bus type LPC,FWH are incompatible. Probing for ST M50FW002, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW016, 2048 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW040, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50FW080, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for ST M50LPW116, 2048 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x20, 256 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x40, 512 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x80, 1024 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x16, 2048 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x32, 4096 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W25x64, 8192 KB: RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Probing for Winbond W29C011, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040B, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040C, 512 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W49F002U, 256 KB: skipped. Host bus type SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: skipped. Host bus type SPI and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080FA, 1024 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Host bus type SPI and chip bus type FWH are incompatible. Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Not unmapping zero size at (nil) Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x15. probe_spi_rdid_generic: id1 0xc2, id2 0x2015 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. REMS returned c2 14. probe_spi_rems: id1 0xc2, id2 0x14 Not unmapping zero size at (nil) === This flash part has status UNTESTED for operations: ERASE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. -[0000:00]-+-00.0 Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] +-02.0 Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] +-02.1 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] +-1c.0-[02]-- +-1c.5-[03]----00.0 Intel Corporation 82573E Gigabit Ethernet Controller (Copper) [8086:108c] +-1d.0 Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] +-1d.1 Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] +-1d.2 Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] +-1d.3 Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] +-1d.7 Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] +-1e.0-[04]-- +-1e.2 Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller [8086:27de] +-1f.0 Intel Corporation 82801GHM (ICH7-M DH) LPC Interface Bridge [8086:27bd] +-1f.1 Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] +-1f.2 Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] \-1f.3 Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] superiotool r Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Found SMSC FDC37N972 (id=0x0b, rev=0x00) at 0x4e Register dump: idx 02 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f val 00 0b 00 00 00 00 00 4e 00 00 00 00 00 00 00 00 00 def 00 0b 00 00 00 04 04 NA NA 00 00 00 00 00 00 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f3 f4 f5 val 01 16 70 00 00 00 d1 15 0b 00 10 def 00 03 f0 06 02 0e 00 ff RR 00 00 LDN 0x01 (Power management (PM1)) idx 30 60 61 val 01 16 70 def 00 00 00 LDN 0x03 (Parallel port) idx 30 60 61 70 74 f0 f1 val 01 16 70 00 00 00 d1 def 00 00 00 00 04 3c 00 LDN 0x04 (COM1) idx 30 60 61 70 f0 val 01 16 70 00 00 def 00 00 00 00 00 LDN 0x05 (COM2) idx 30 60 61 62 63 70 74 f0 f1 f2 f7 f8 val 01 16 70 00 00 00 00 00 d1 15 00 00 def 00 00 00 00 00 00 04 00 02 03 00 00 LDN 0x06 (Real-time clock (RTC)) idx 30 60 61 62 63 70 f0 f1 val 01 16 70 00 00 00 00 d1 def 00 00 70 00 74 00 00 NA LDN 0x07 (Keyboard) idx 30 60 61 70 72 f0 val 01 16 70 00 00 00 def 00 00 00 00 00 00 LDN 0x08 (Embedded controller (EC)) idx 30 60 61 val 01 16 70 def 00 00 62 LDN 0x09 (Mailbox) idx 30 60 61 val 01 16 70 def 00 00 00 Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found.

2 2

Request for Help/Information - Booting Linux Kernel (Embedded x86)
by Graeme Russ 01 Feb '10

01 Feb '10

Hi All, I am undertaking a little project at home to get Linux running on a custom x86 (AMD SC520) based board. The board is pretty simple, just the CPU some RAM and Flash, a couple of Ethernet (Realtek 8100B) ports and some other miscellaneous custom hardware (don't need to worry about this for now). This board is in no way shape or form a mini-PC The whole point of doing the Linux port is a kind of 'because its there' thing. I had some (very little as it turns out) free time, so I decided to give it a go. After having a good look around, I ended up choosing U-Boot as a boot loader (in which case you would assume my question is really for the U-Boot list and not coreboot - please read on). Unfortunately, U-Boot's x86 support at the time was very stagnant. No work had been done on the x86 port since about mid 2003 and several non-x86 patches had pretty much completely clobbered it to the point it would not even compile. I've been working on U-Boot now since July 2008 and have been pushing patches back in to the point where U-Boot has a good, stable, x86 implementation. I have now arrived at my next hurdle - Getting a Linux Kernel running. I'm having difficulty finding any real information on the sequence of events that need to be gone through in the x86 embedded environment to get the kernel up and running. Even coreboot seems a little light-on (I have seen mention of the Linux Kernel being a legitimate payload, but no obvious instruction on how this is configured and how it works). But so far, the coreboot community appears to be the closest thing to an x86 embedded Linux community that I can find. I suppose I have a couple of questions to start of with that I hope someone here can answer: 0) Is there a good repository of information regarding embedded Linux in the x86 (not PC!!!!) architecture 1) The boot-loader (both U-Boot and coreboot) put the x86 staight into Protected Mode - Does the CPU need to be put back into Real Mode before entering the Linux Kernel (in order to allow the Kernel to put the CPU into Protected Mode) 2) Which Kernel image should I use (vmlinux, vmlinux.bin, bzImage etc) 3) Can I copy the compiled Kernel image directly into RAM simply perform a 'Jump' into it 5) Can I run x86 Linux without needed any kind of BIOS emulation? 4) Are these the right questions to ask? Are there 'better' questions I should be asking? Hopefully someone can answer some of these and/or point me towards some good technical information. Regards, Graeme

5 10

Tinyscheme ported to coreboot/libpayload
by Sylvain Ageneau 01 Feb '10

01 Feb '10

Hello, I'd like to announce that tinyscheme can now run as a coreboot payload. TinyScheme is a lightweight Scheme interpreter that implements as large a subset of R5RS as was possible without getting very large and complicated. It is meant to be used as an embedded scripting interpreter for other programs. As such, it does not offer IDEs or extensive toolkits although it does sport a small top-level loop, included conditionally. A lot of functionality in TinyScheme is included conditionally, to allow developers freedom in balancing features and footprint. Programmatically, foreign functions in C can be added and values can be defined in the Scheme environment. Tinyscheme's author is Dimitrios Souflis. The resulting payload is 90kb. It takes about 250k heap size. The port was quite straightforward, most of the needed fonctionality needed was already in libpayload. It was probably possible to adapt tinyscheme to run on an unmodified libpayload but it didn't seem difficult to take the needed C functions from dietlibc (mostly stdio / math stuff) so I went that way instead (just needed to make some stubs for some low level functions like read/write). I don't know what your policy is with respect to integrating code from another GPL project but it looks like quite a bit of dietlibc could be easily integrated into libpayload. Some stuff uses syscalls and the like but other code doesn't require any fancy OS functionality. I've attached the needed patches to this mail + a Makefile to download what's needed. Just do make; make run (hopefully). I also included a precompiled payload suitable for qemu. It should work on an x86 linux distribution. I don't have access to a coreboot supported motherboard so I've only tested it on qemu. Regards, Sylvain Ageneau

3 3

KBuild Report [r5072]
by coresystems autobuild service 01 Feb '10

01 Feb '10

[1/117] a-trend/atc-6220 ok. Processing mainboard/a-trend/atc-6220 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [2/117] a-trend/atc-6240 ok. Processing mainboard/a-trend/atc-6240 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [3/117] abit/be6-ii_v2_0 ok. Processing mainboard/abit/be6-ii_v2_0 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [4/117] advantech/pcm-5820 ok. Processing mainboard/advantech/pcm-5820 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [5/117] amd/db800 ok. Processing mainboard/amd/db800 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [6/117] amd/dbm690t ok. Processing mainboard/amd/dbm690t (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/amd/dbm690t/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 [7/117] amd/norwich ok. Processing mainboard/amd/norwich (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [8/117] amd/pistachio ok. Processing mainboard/amd/pistachio (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/amd/pistachio/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [9/117] amd/rumba ok. Processing mainboard/amd/rumba (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [10/117] amd/serengeti_cheetah ok. Processing mainboard/amd/serengeti_cheetah (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/amd/serengeti_cheetah/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [11/117] amd/serengeti_cheetah_fam10 ok. Processing mainboard/amd/serengeti_cheetah_fam10 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/amd/serengeti_cheetah_fam10/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [12/117] arima/hdama ok. Processing mainboard/arima/hdama (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/arima/hdama/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [13/117] artecgroup/dbe61 ok. Processing mainboard/artecgroup/dbe61 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [14/117] asi/mb_5blgp ok. Processing mainboard/asi/mb_5blgp (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [15/117] asi/mb_5blmp ok. Processing mainboard/asi/mb_5blmp (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_GX1_VIDEO = 0x1 +CONFIG_GX1_VIDEOMODE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_SPLASH_GRAPHIC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [16/117] asus/a8n_e ok. Processing mainboard/asus/a8n_e (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/asus/a8n_e/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc8000 +CONFIG_DCACHE_RAM_BASE = 0xcf000 -CONFIG_DCACHE_RAM_SIZE = 0x8000 +CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [17/117] asus/a8v-e_se ok. Processing mainboard/asus/a8v-e_se (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [18/117] asus/m2v-mx_se ok. Processing mainboard/asus/m2v-mx_se (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/asus/m2v-mx_se/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_LOW_TABLES = 0x0 +CONFIG_HAVE_LOW_TABLES = 0x1 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x1f00000 +CONFIG_RAMBASE = 0x100000 -CONFIG_RAMTOP = 0x2000000 +CONFIG_RAMTOP = 0x200000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [19/117] asus/mew-am ok. Processing mainboard/asus/mew-am (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [20/117] asus/mew-vm ok. Processing mainboard/asus/mew-vm (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [21/117] asus/p2b-d ok. Processing mainboard/asus/p2b-d (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [22/117] asus/p2b-ds ok. Processing mainboard/asus/p2b-ds (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [23/117] asus/p2b-f ok. Processing mainboard/asus/p2b-f (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [24/117] asus/p2b ok. Processing mainboard/asus/p2b (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [25/117] asus/p3b-f ok. Processing mainboard/asus/p3b-f (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [26/117] axus/tc320 ok. Processing mainboard/axus/tc320 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x6 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x6 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [27/117] azza/pt-6ibd ok. Processing mainboard/azza/pt-6ibd (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [28/117] bcom/winnet100 ok. Processing mainboard/bcom/winnet100 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x6 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x6 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [29/117] bcom/winnetp680 ok. Processing mainboard/bcom/winnetp680 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/bcom/winnetp680/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN700_VIDEO_MB_128MB = 0x0 +CONFIG_CN700_VIDEO_MB_16MB = 0x0 +CONFIG_CN700_VIDEO_MB_32MB = 0x1 +CONFIG_CN700_VIDEO_MB_64MB = 0x0 +CONFIG_CN700_VIDEO_MB_8MB = 0x0 +CONFIG_CN700_VIDEO_MB_OFF = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_SMP = 0x1 +CONFIG_SMP = 0x0 [30/117] biostar/m6tba ok. Processing mainboard/biostar/m6tba (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [31/117] broadcom/blast ok. Processing mainboard/broadcom/blast (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x0 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [32/117] compaq/deskpro_en_sff_p600 ok. Processing mainboard/compaq/deskpro_en_sff_p600 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [33/117] dell/s1850 ok. Processing mainboard/dell/s1850 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_TTYS0_BAUD = 0x4b00 +CONFIG_TTYS0_BAUD = 0x1c200 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [34/117] digitallogic/adl855pc ok. Processing mainboard/digitallogic/adl855pc (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SMP = 0x0 +CONFIG_SMP = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [35/117] digitallogic/msm586seg ok. Processing mainboard/digitallogic/msm586seg (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/digitallogic/msm586seg/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_UDELAY_LAPIC = 0x0 +CONFIG_UDELAY_TSC = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [36/117] digitallogic/msm800sev ok. Processing mainboard/digitallogic/msm800sev (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [37/117] eaglelion/5bcm ok. Processing mainboard/eaglelion/5bcm (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_GX1_VIDEO = 0x1 +CONFIG_GX1_VIDEOMODE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_SPLASH_GRAPHIC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [38/117] emulation/qemu-x86 ok. Processing mainboard/emulation/qemu-x86 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/emulation/qemu-x86/Config-abuild.lb ok Creating builddir...ok +CONFIG_CPU_EMULATION_QEMU_X86 = 0x1 -CONFIG_DCACHE_RAM_BASE = 0x8f000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_UDELAY_LAPIC = 0x0 +CONFIG_UDELAY_TSC = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [39/117] gigabyte/ga-6bxc ok. Processing mainboard/gigabyte/ga-6bxc (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [40/117] gigabyte/ga_2761gxdk ok. Processing mainboard/gigabyte/ga_2761gxdk (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/gigabyte/ga_2761gxdk/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [41/117] gigabyte/m57sli ok. Processing mainboard/gigabyte/m57sli (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/gigabyte/m57sli/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL = 0x1 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [42/117] hp/dl145_g3 ok. Processing mainboard/hp/dl145_g3 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x0 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [43/117] hp/e_vectra_p2706t ok. Processing mainboard/hp/e_vectra_p2706t (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 [44/117] ibm/e325 ok. Processing mainboard/ibm/e325 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_SMP = 0x1 +CONFIG_SMP = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [45/117] ibm/e326 ok. Processing mainboard/ibm/e326 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/ibm/e326/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [46/117] iei/juki-511p ok. Processing mainboard/iei/juki-511p (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/iei/juki-511p/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_GX1_VIDEO = 0x1 +CONFIG_GX1_VIDEOMODE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x0 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_SPLASH_GRAPHIC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [47/117] iei/nova4899r ok. Processing mainboard/iei/nova4899r (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_GX1_VIDEO = 0x1 +CONFIG_GX1_VIDEOMODE = 0x0 -CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_SPLASH_GRAPHIC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [48/117] iei/pcisa-lx-800-r10 ok. Processing mainboard/iei/pcisa-lx-800-r10 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [49/117] intel/d945gclf ok. Processing mainboard/intel/d945gclf (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/intel/d945gclf/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xffed8000 +CONFIG_DCACHE_RAM_BASE = 0xffdf8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_USE_DCACHE_RAM = 0x1 +CONFIG_USE_DCACHE_RAM = 0x0 [50/117] intel/eagleheights ok. Processing mainboard/intel/eagleheights (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x8086 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_USE_DCACHE_RAM = 0x1 +CONFIG_USE_DCACHE_RAM = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [51/117] intel/jarrell ok. Processing mainboard/intel/jarrell (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok +CONFIG_ATI_RAGE_XL = 0x1 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_MAX_REBOOT_CNT = 0x8 +CONFIG_MAX_REBOOT_CNT = 0x3 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [52/117] intel/mtarvon ok. Processing mainboard/intel/mtarvon (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LB_CKS_LOC = 0x7e +CONFIG_LB_CKS_LOC = 0x7b -CONFIG_LB_CKS_RANGE_END = 0x7d +CONFIG_LB_CKS_RANGE_END = 0x7a -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x5 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [53/117] intel/truxton ok. Processing mainboard/intel/truxton (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LB_CKS_LOC = 0x7e +CONFIG_LB_CKS_LOC = 0x7b -CONFIG_LB_CKS_RANGE_END = 0x7d +CONFIG_LB_CKS_RANGE_END = 0x7a -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x5 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [54/117] intel/xe7501devkit ok. Processing mainboard/intel/xe7501devkit (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEBUG = 0x1 +CONFIG_DEBUG = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [55/117] iwill/dk8_htx ok. Processing mainboard/iwill/dk8_htx (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/iwill/dk8_htx/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc4000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_SIZE = 0xc000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HW_MEM_HOLE_SIZEK = 0x80000 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [56/117] iwill/dk8s2 ok. Processing mainboard/iwill/dk8s2 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok +CONFIG_ATI_RAGE_XL = 0x1 -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [57/117] iwill/dk8x ok. Processing mainboard/iwill/dk8x (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [58/117] jetway/j7f24 ok. Processing mainboard/jetway/j7f24 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/jetway/j7f24/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN700_VIDEO_MB_128MB = 0x0 +CONFIG_CN700_VIDEO_MB_16MB = 0x0 +CONFIG_CN700_VIDEO_MB_32MB = 0x1 +CONFIG_CN700_VIDEO_MB_64MB = 0x0 +CONFIG_CN700_VIDEO_MB_8MB = 0x0 +CONFIG_CN700_VIDEO_MB_OFF = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 [59/117] kontron/986lcd-m ok. Processing mainboard/kontron/986lcd-m (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/kontron/986lcd-m/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 [60/117] kontron/kt690 ok. Processing mainboard/kontron/kt690 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/kontron/kt690/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [61/117] lippert/frontrunner ok. Processing mainboard/lippert/frontrunner (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [62/117] lippert/roadrunner-lx ok. Processing mainboard/lippert/roadrunner-lx (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEBUG = 0x1 +CONFIG_DEBUG = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [63/117] lippert/spacerunner-lx ok. Processing mainboard/lippert/spacerunner-lx (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEBUG = 0x1 +CONFIG_DEBUG = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [64/117] mitac/6513wu ok. Processing mainboard/mitac/6513wu (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [65/117] msi/ms6119 ok. Processing mainboard/msi/ms6119 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [66/117] msi/ms6147 ok. Processing mainboard/msi/ms6147 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [67/117] msi/ms6156 ok. Processing mainboard/msi/ms6156 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [68/117] msi/ms6178 ok. Processing mainboard/msi/ms6178 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [69/117] msi/ms7135 ok. Processing mainboard/msi/ms7135 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/msi/ms7135/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc8000 +CONFIG_DCACHE_RAM_BASE = 0xcf000 -CONFIG_DCACHE_RAM_SIZE = 0x8000 +CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [70/117] msi/ms7260 ok. Processing mainboard/msi/ms7260 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/msi/ms7260/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [71/117] msi/ms9185 ok. Processing mainboard/msi/ms9185 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/msi/ms9185/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x0 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1022 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [72/117] msi/ms9282 ok. Processing mainboard/msi/ms9282 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/msi/ms9282/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [73/117] nec/powermate2000 ok. Processing mainboard/nec/powermate2000 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [74/117] newisys/khepri ok. Processing mainboard/newisys/khepri (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [75/117] nvidia/l1_2pvv ok. Processing mainboard/nvidia/l1_2pvv (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/nvidia/l1_2pvv/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 [76/117] olpc/btest ok. Processing mainboard/olpc/btest (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [77/117] olpc/rev_a ok. Processing mainboard/olpc/rev_a (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [78/117] pcengines/alix1c ok. Processing mainboard/pcengines/alix1c (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [79/117] rca/rm4100 ok. Processing mainboard/rca/rm4100 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/rca/rm4100/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I830_VIDEO_MB_1MB = 0x0 +CONFIG_I830_VIDEO_MB_512KB = 0x0 +CONFIG_I830_VIDEO_MB_8MB = 0x1 +CONFIG_I830_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [80/117] roda/rk886ex ok. Processing mainboard/roda/rk886ex (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/roda/rk886ex/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_USE_DCACHE_RAM = 0x1 +CONFIG_USE_DCACHE_RAM = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES = 0x0 [81/117] soyo/sy-6ba-plus-iii ok. Processing mainboard/soyo/sy-6ba-plus-iii (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [82/117] sunw/ultra40 ok. Processing mainboard/sunw/ultra40 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [83/117] supermicro/h8dme ok. Processing mainboard/supermicro/h8dme (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/supermicro/h8dme/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_LOW_TABLES = 0x0 +CONFIG_HAVE_LOW_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 [84/117] supermicro/h8dmr ok. Processing mainboard/supermicro/h8dmr (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/supermicro/h8dmr/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 [85/117] supermicro/h8dmr_fam10 ok. Processing mainboard/supermicro/h8dmr_fam10 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/supermicro/h8dmr_fam10/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [86/117] supermicro/x6dai_g ok. Processing mainboard/supermicro/x6dai_g (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [87/117] supermicro/x6dhe_g ok. Processing mainboard/supermicro/x6dhe_g (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [88/117] supermicro/x6dhe_g2 ok. Processing mainboard/supermicro/x6dhe_g2 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [89/117] supermicro/x6dhr_ig ok. Processing mainboard/supermicro/x6dhr_ig (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [90/117] supermicro/x6dhr_ig2 ok. Processing mainboard/supermicro/x6dhr_ig2 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [91/117] technexion/tim5690 ok. Processing mainboard/technexion/tim5690 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/technexion/tim5690/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 [92/117] technexion/tim8690 ok. Processing mainboard/technexion/tim8690 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/technexion/tim8690/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [93/117] technologic/ts5300 ok. Processing mainboard/technologic/ts5300 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/technologic/ts5300/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 -CONFIG_TTYS0_BASE = 0x2f8 +CONFIG_TTYS0_BASE = 0x3f8 +CONFIG_UDELAY_LAPIC = 0x0 +CONFIG_UDELAY_TSC = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [94/117] televideo/tc7020 ok. Processing mainboard/televideo/tc7020 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x6 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x6 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [95/117] thomson/ip1000 ok. Processing mainboard/thomson/ip1000 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/thomson/ip1000/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I830_VIDEO_MB_1MB = 0x0 +CONFIG_I830_VIDEO_MB_512KB = 0x0 +CONFIG_I830_VIDEO_MB_8MB = 0x1 +CONFIG_I830_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [96/117] tyan/s1846 ok. Processing mainboard/tyan/s1846 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [97/117] tyan/s2735 ok. Processing mainboard/tyan/s2735 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_USE_PRINTK_IN_CAR = 0x1 +CONFIG_USE_PRINTK_IN_CAR = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [98/117] tyan/s2850 ok. Processing mainboard/tyan/s2850 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [99/117] tyan/s2875 ok. Processing mainboard/tyan/s2875 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [100/117] tyan/s2880 ok. Processing mainboard/tyan/s2880 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [101/117] tyan/s2881 ok. Processing mainboard/tyan/s2881 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [102/117] tyan/s2882 ok. Processing mainboard/tyan/s2882 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [103/117] tyan/s2885 ok. Processing mainboard/tyan/s2885 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [104/117] tyan/s2891 ok. Processing mainboard/tyan/s2891 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/tyan/s2891/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 [105/117] tyan/s2892 ok. Processing mainboard/tyan/s2892 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/tyan/s2892/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 [106/117] tyan/s2895 ok. Processing mainboard/tyan/s2895 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/tyan/s2895/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 [107/117] tyan/s2912 ok. Processing mainboard/tyan/s2912 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/tyan/s2912/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 [108/117] tyan/s2912_fam10 ok. Processing mainboard/tyan/s2912_fam10 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/tyan/s2912_fam10/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [109/117] tyan/s4880 ok. Processing mainboard/tyan/s4880 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [110/117] tyan/s4882 ok. Processing mainboard/tyan/s4882 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x2000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [111/117] via/epia-cn ok. Processing mainboard/via/epia-cn (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/via/epia-cn/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN700_VIDEO_MB_128MB = 0x0 +CONFIG_CN700_VIDEO_MB_16MB = 0x0 +CONFIG_CN700_VIDEO_MB_32MB = 0x1 +CONFIG_CN700_VIDEO_MB_64MB = 0x0 +CONFIG_CN700_VIDEO_MB_8MB = 0x0 +CONFIG_CN700_VIDEO_MB_OFF = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 [112/117] via/epia-m ok. Processing mainboard/via/epia-m (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/via/epia-m/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 [113/117] via/epia-m700 ok. Processing mainboard/via/epia-m700 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/via/epia-m700/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_SIZE = 0x2000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x0 -CONFIG_HEAP_SIZE = 0x5000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1019 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_USE_DCACHE_RAM = 0x1 +CONFIG_USE_DCACHE_RAM = 0x0 [114/117] via/epia-n ok. Processing mainboard/via/epia-n (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/via/epia-n/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN400_VIDEO_MB_128MB = 0x0 +CONFIG_CN400_VIDEO_MB_16MB = 0x0 +CONFIG_CN400_VIDEO_MB_32MB = 0x1 +CONFIG_CN400_VIDEO_MB_64MB = 0x0 +CONFIG_CN400_VIDEO_MB_8MB = 0x0 +CONFIG_CN400_VIDEO_MB_OFF = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x0 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_SMP = 0x1 +CONFIG_SMP = 0x0 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [115/117] via/epia ok. Processing mainboard/via/epia (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_INIT_TIMER = 0x0 +CONFIG_HAVE_INIT_TIMER = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_UDELAY_IO = 0x1 +CONFIG_UDELAY_IO = 0x0 -CONFIG_UDELAY_TSC = 0x0 +CONFIG_UDELAY_TSC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [116/117] via/pc2500e ok. Processing mainboard/via/pc2500e (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/via/pc2500e/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN700_VIDEO_MB_128MB = 0x0 +CONFIG_CN700_VIDEO_MB_16MB = 0x0 +CONFIG_CN700_VIDEO_MB_32MB = 0x1 +CONFIG_CN700_VIDEO_MB_64MB = 0x0 +CONFIG_CN700_VIDEO_MB_8MB = 0x0 +CONFIG_CN700_VIDEO_MB_OFF = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_USE_OPTION_TABLE = 0x1 +CONFIG_USE_OPTION_TABLE = 0x0 [117/117] via/vt8454c ok. Processing mainboard/via/vt8454c (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5072/targets/via/vt8454c/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1019 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x5 -CONFIG_SMP = 0x1 +CONFIG_SMP = 0x0 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0

1 0

KBuild Report [r5071]
by coresystems autobuild service 01 Feb '10

01 Feb '10

[1/117] a-trend/atc-6220 ok. Processing mainboard/a-trend/atc-6220 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [2/117] a-trend/atc-6240 ok. Processing mainboard/a-trend/atc-6240 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [3/117] abit/be6-ii_v2_0 ok. Processing mainboard/abit/be6-ii_v2_0 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [4/117] advantech/pcm-5820 ok. Processing mainboard/advantech/pcm-5820 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [5/117] amd/db800 ok. Processing mainboard/amd/db800 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [6/117] amd/dbm690t ok. Processing mainboard/amd/dbm690t (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/amd/dbm690t/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 [7/117] amd/norwich ok. Processing mainboard/amd/norwich (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [8/117] amd/pistachio ok. Processing mainboard/amd/pistachio (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/amd/pistachio/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [9/117] amd/rumba ok. Processing mainboard/amd/rumba (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [10/117] amd/serengeti_cheetah ok. Processing mainboard/amd/serengeti_cheetah (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/amd/serengeti_cheetah/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [11/117] amd/serengeti_cheetah_fam10 ok. Processing mainboard/amd/serengeti_cheetah_fam10 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/amd/serengeti_cheetah_fam10/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [12/117] arima/hdama ok. Processing mainboard/arima/hdama (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/arima/hdama/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [13/117] artecgroup/dbe61 ok. Processing mainboard/artecgroup/dbe61 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [14/117] asi/mb_5blgp ok. Processing mainboard/asi/mb_5blgp (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [15/117] asi/mb_5blmp ok. Processing mainboard/asi/mb_5blmp (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_GX1_VIDEO = 0x1 +CONFIG_GX1_VIDEOMODE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_SPLASH_GRAPHIC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [16/117] asus/a8n_e ok. Processing mainboard/asus/a8n_e (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/asus/a8n_e/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc8000 +CONFIG_DCACHE_RAM_BASE = 0xcf000 -CONFIG_DCACHE_RAM_SIZE = 0x8000 +CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [17/117] asus/a8v-e_se ok. Processing mainboard/asus/a8v-e_se (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [18/117] asus/m2v-mx_se ok. Processing mainboard/asus/m2v-mx_se (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/asus/m2v-mx_se/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_LOW_TABLES = 0x0 +CONFIG_HAVE_LOW_TABLES = 0x1 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x1f00000 +CONFIG_RAMBASE = 0x100000 -CONFIG_RAMTOP = 0x2000000 +CONFIG_RAMTOP = 0x200000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [19/117] asus/mew-am ok. Processing mainboard/asus/mew-am (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [20/117] asus/mew-vm ok. Processing mainboard/asus/mew-vm (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [21/117] asus/p2b-d ok. Processing mainboard/asus/p2b-d (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [22/117] asus/p2b-ds ok. Processing mainboard/asus/p2b-ds (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [23/117] asus/p2b-f ok. Processing mainboard/asus/p2b-f (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [24/117] asus/p2b ok. Processing mainboard/asus/p2b (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [25/117] asus/p3b-f ok. Processing mainboard/asus/p3b-f (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [26/117] axus/tc320 ok. Processing mainboard/axus/tc320 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x6 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x6 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [27/117] azza/pt-6ibd ok. Processing mainboard/azza/pt-6ibd (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [28/117] bcom/winnet100 ok. Processing mainboard/bcom/winnet100 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x6 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x6 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [29/117] bcom/winnetp680 ok. Processing mainboard/bcom/winnetp680 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/bcom/winnetp680/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN700_VIDEO_MB_128MB = 0x0 +CONFIG_CN700_VIDEO_MB_16MB = 0x0 +CONFIG_CN700_VIDEO_MB_32MB = 0x1 +CONFIG_CN700_VIDEO_MB_64MB = 0x0 +CONFIG_CN700_VIDEO_MB_8MB = 0x0 +CONFIG_CN700_VIDEO_MB_OFF = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_SMP = 0x1 +CONFIG_SMP = 0x0 [30/117] biostar/m6tba ok. Processing mainboard/biostar/m6tba (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [31/117] broadcom/blast ok. Processing mainboard/broadcom/blast (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x0 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [32/117] compaq/deskpro_en_sff_p600 ok. Processing mainboard/compaq/deskpro_en_sff_p600 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [33/117] dell/s1850 ok. Processing mainboard/dell/s1850 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_TTYS0_BAUD = 0x4b00 +CONFIG_TTYS0_BAUD = 0x1c200 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [34/117] digitallogic/adl855pc ok. Processing mainboard/digitallogic/adl855pc (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SMP = 0x0 +CONFIG_SMP = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [35/117] digitallogic/msm586seg ok. Processing mainboard/digitallogic/msm586seg (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/digitallogic/msm586seg/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_UDELAY_LAPIC = 0x0 +CONFIG_UDELAY_TSC = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [36/117] digitallogic/msm800sev ok. Processing mainboard/digitallogic/msm800sev (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [37/117] eaglelion/5bcm ok. Processing mainboard/eaglelion/5bcm (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_GX1_VIDEO = 0x1 +CONFIG_GX1_VIDEOMODE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_SPLASH_GRAPHIC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [38/117] emulation/qemu-x86 ok. Processing mainboard/emulation/qemu-x86 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/emulation/qemu-x86/Config-abuild.lb ok Creating builddir...ok +CONFIG_CPU_EMULATION_QEMU_X86 = 0x1 -CONFIG_DCACHE_RAM_BASE = 0x8f000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_UDELAY_LAPIC = 0x0 +CONFIG_UDELAY_TSC = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [39/117] gigabyte/ga-6bxc ok. Processing mainboard/gigabyte/ga-6bxc (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [40/117] gigabyte/ga_2761gxdk ok. Processing mainboard/gigabyte/ga_2761gxdk (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/gigabyte/ga_2761gxdk/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [41/117] gigabyte/m57sli ok. Processing mainboard/gigabyte/m57sli (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/gigabyte/m57sli/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL = 0x1 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [42/117] hp/dl145_g3 ok. Processing mainboard/hp/dl145_g3 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x0 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [43/117] hp/e_vectra_p2706t ok. Processing mainboard/hp/e_vectra_p2706t (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 [44/117] ibm/e325 ok. Processing mainboard/ibm/e325 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_SMP = 0x1 +CONFIG_SMP = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [45/117] ibm/e326 ok. Processing mainboard/ibm/e326 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/ibm/e326/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [46/117] iei/juki-511p ok. Processing mainboard/iei/juki-511p (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/iei/juki-511p/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_GX1_VIDEO = 0x1 +CONFIG_GX1_VIDEOMODE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x0 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_SPLASH_GRAPHIC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [47/117] iei/nova4899r ok. Processing mainboard/iei/nova4899r (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_GX1_VIDEO = 0x1 +CONFIG_GX1_VIDEOMODE = 0x0 -CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_SPLASH_GRAPHIC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [48/117] iei/pcisa-lx-800-r10 ok. Processing mainboard/iei/pcisa-lx-800-r10 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [49/117] intel/d945gclf ok. Processing mainboard/intel/d945gclf (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/intel/d945gclf/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xffed8000 +CONFIG_DCACHE_RAM_BASE = 0xffdf8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_USE_DCACHE_RAM = 0x1 +CONFIG_USE_DCACHE_RAM = 0x0 [50/117] intel/eagleheights ok. Processing mainboard/intel/eagleheights (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x8086 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_USE_DCACHE_RAM = 0x1 +CONFIG_USE_DCACHE_RAM = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [51/117] intel/jarrell ok. Processing mainboard/intel/jarrell (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok +CONFIG_ATI_RAGE_XL = 0x1 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_MAX_REBOOT_CNT = 0x8 +CONFIG_MAX_REBOOT_CNT = 0x3 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [52/117] intel/mtarvon ok. Processing mainboard/intel/mtarvon (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LB_CKS_LOC = 0x7e +CONFIG_LB_CKS_LOC = 0x7b -CONFIG_LB_CKS_RANGE_END = 0x7d +CONFIG_LB_CKS_RANGE_END = 0x7a -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x5 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [53/117] intel/truxton ok. Processing mainboard/intel/truxton (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LB_CKS_LOC = 0x7e +CONFIG_LB_CKS_LOC = 0x7b -CONFIG_LB_CKS_RANGE_END = 0x7d +CONFIG_LB_CKS_RANGE_END = 0x7a -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x5 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [54/117] intel/xe7501devkit ok. Processing mainboard/intel/xe7501devkit (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEBUG = 0x1 +CONFIG_DEBUG = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [55/117] iwill/dk8_htx ok. Processing mainboard/iwill/dk8_htx (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/iwill/dk8_htx/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc4000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_SIZE = 0xc000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HW_MEM_HOLE_SIZEK = 0x80000 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [56/117] iwill/dk8s2 ok. Processing mainboard/iwill/dk8s2 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok +CONFIG_ATI_RAGE_XL = 0x1 -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [57/117] iwill/dk8x ok. Processing mainboard/iwill/dk8x (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [58/117] jetway/j7f24 ok. Processing mainboard/jetway/j7f24 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/jetway/j7f24/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN700_VIDEO_MB_128MB = 0x0 +CONFIG_CN700_VIDEO_MB_16MB = 0x0 +CONFIG_CN700_VIDEO_MB_32MB = 0x1 +CONFIG_CN700_VIDEO_MB_64MB = 0x0 +CONFIG_CN700_VIDEO_MB_8MB = 0x0 +CONFIG_CN700_VIDEO_MB_OFF = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 [59/117] kontron/986lcd-m ok. Processing mainboard/kontron/986lcd-m (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/kontron/986lcd-m/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 [60/117] kontron/kt690 ok. Processing mainboard/kontron/kt690 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/kontron/kt690/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [61/117] lippert/frontrunner ok. Processing mainboard/lippert/frontrunner (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [62/117] lippert/roadrunner-lx ok. Processing mainboard/lippert/roadrunner-lx (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEBUG = 0x1 +CONFIG_DEBUG = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [63/117] lippert/spacerunner-lx ok. Processing mainboard/lippert/spacerunner-lx (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEBUG = 0x1 +CONFIG_DEBUG = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [64/117] mitac/6513wu ok. Processing mainboard/mitac/6513wu (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [65/117] msi/ms6119 ok. Processing mainboard/msi/ms6119 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [66/117] msi/ms6147 ok. Processing mainboard/msi/ms6147 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [67/117] msi/ms6156 ok. Processing mainboard/msi/ms6156 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [68/117] msi/ms6178 ok. Processing mainboard/msi/ms6178 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [69/117] msi/ms7135 ok. Processing mainboard/msi/ms7135 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/msi/ms7135/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc8000 +CONFIG_DCACHE_RAM_BASE = 0xcf000 -CONFIG_DCACHE_RAM_SIZE = 0x8000 +CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [70/117] msi/ms7260 ok. Processing mainboard/msi/ms7260 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/msi/ms7260/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [71/117] msi/ms9185 ok. Processing mainboard/msi/ms9185 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/msi/ms9185/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x0 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1022 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [72/117] msi/ms9282 ok. Processing mainboard/msi/ms9282 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/msi/ms9282/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HW_MEM_HOLE_SIZEK = 0x0 +CONFIG_HW_MEM_HOLE_SIZEK = 0x100000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [73/117] nec/powermate2000 ok. Processing mainboard/nec/powermate2000 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I810_VIDEO_MB_1MB = 0x1 +CONFIG_I810_VIDEO_MB_512KB = 0x0 +CONFIG_I810_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [74/117] newisys/khepri ok. Processing mainboard/newisys/khepri (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [75/117] nvidia/l1_2pvv ok. Processing mainboard/nvidia/l1_2pvv (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/nvidia/l1_2pvv/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 [76/117] olpc/btest ok. Processing mainboard/olpc/btest (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [77/117] olpc/rev_a ok. Processing mainboard/olpc/rev_a (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [78/117] pcengines/alix1c ok. Processing mainboard/pcengines/alix1c (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [79/117] rca/rm4100 ok. Processing mainboard/rca/rm4100 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/rca/rm4100/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I830_VIDEO_MB_1MB = 0x0 +CONFIG_I830_VIDEO_MB_512KB = 0x0 +CONFIG_I830_VIDEO_MB_8MB = 0x1 +CONFIG_I830_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [80/117] roda/rk886ex ok. Processing mainboard/roda/rk886ex (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/roda/rk886ex/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_USE_DCACHE_RAM = 0x1 +CONFIG_USE_DCACHE_RAM = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES = 0x0 [81/117] soyo/sy-6ba-plus-iii ok. Processing mainboard/soyo/sy-6ba-plus-iii (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [82/117] sunw/ultra40 ok. Processing mainboard/sunw/ultra40 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [83/117] supermicro/h8dme ok. Processing mainboard/supermicro/h8dme (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/supermicro/h8dme/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_LOW_TABLES = 0x0 +CONFIG_HAVE_LOW_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 [84/117] supermicro/h8dmr ok. Processing mainboard/supermicro/h8dmr (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/supermicro/h8dmr/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 [85/117] supermicro/h8dmr_fam10 ok. Processing mainboard/supermicro/h8dmr_fam10 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/supermicro/h8dmr_fam10/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [86/117] supermicro/x6dai_g ok. Processing mainboard/supermicro/x6dai_g (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [87/117] supermicro/x6dhe_g ok. Processing mainboard/supermicro/x6dhe_g (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [88/117] supermicro/x6dhe_g2 ok. Processing mainboard/supermicro/x6dhe_g2 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [89/117] supermicro/x6dhr_ig ok. Processing mainboard/supermicro/x6dhr_ig (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [90/117] supermicro/x6dhr_ig2 ok. Processing mainboard/supermicro/x6dhr_ig2 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [91/117] technexion/tim5690 ok. Processing mainboard/technexion/tim5690 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/technexion/tim5690/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 [92/117] technexion/tim8690 ok. Processing mainboard/technexion/tim8690 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/technexion/tim8690/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_GFXUMA = 0x1 +CONFIG_GFXUMA = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 -CONFIG_HAVE_OPTION_TABLE = 0x0 +CONFIG_HAVE_OPTION_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 [93/117] technologic/ts5300 ok. Processing mainboard/technologic/ts5300 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/technologic/ts5300/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 +CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 0x0 -CONFIG_TTYS0_BASE = 0x2f8 +CONFIG_TTYS0_BASE = 0x3f8 +CONFIG_UDELAY_LAPIC = 0x0 +CONFIG_UDELAY_TSC = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [94/117] televideo/tc7020 ok. Processing mainboard/televideo/tc7020 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x6 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x6 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [95/117] thomson/ip1000 ok. Processing mainboard/thomson/ip1000 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/thomson/ip1000/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_I830_VIDEO_MB_1MB = 0x0 +CONFIG_I830_VIDEO_MB_512KB = 0x0 +CONFIG_I830_VIDEO_MB_8MB = 0x1 +CONFIG_I830_VIDEO_MB_OFF = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [96/117] tyan/s1846 ok. Processing mainboard/tyan/s1846 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [97/117] tyan/s2735 ok. Processing mainboard/tyan/s2735 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 -CONFIG_USE_PRINTK_IN_CAR = 0x1 +CONFIG_USE_PRINTK_IN_CAR = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [98/117] tyan/s2850 ok. Processing mainboard/tyan/s2850 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [99/117] tyan/s2875 ok. Processing mainboard/tyan/s2875 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [100/117] tyan/s2880 ok. Processing mainboard/tyan/s2880 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [101/117] tyan/s2881 ok. Processing mainboard/tyan/s2881 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [102/117] tyan/s2882 ok. Processing mainboard/tyan/s2882 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [103/117] tyan/s2885 ok. Processing mainboard/tyan/s2885 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [104/117] tyan/s2891 ok. Processing mainboard/tyan/s2891 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/tyan/s2891/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 [105/117] tyan/s2892 ok. Processing mainboard/tyan/s2892 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/tyan/s2892/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 [106/117] tyan/s2895 ok. Processing mainboard/tyan/s2895 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/tyan/s2895/Config-abuild.lb ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xcf000 +CONFIG_DCACHE_RAM_BASE = 0xc8000 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x0 +CONFIG_SERIAL_CPU_INIT = 0x1 [107/117] tyan/s2912 ok. Processing mainboard/tyan/s2912 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/tyan/s2912/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HEAP_SIZE = 0x8000 +CONFIG_HEAP_SIZE = 0x4000 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 -CONFIG_WAIT_BEFORE_CPUS_INIT = 0x1 +CONFIG_WAIT_BEFORE_CPUS_INIT = 0x0 [108/117] tyan/s2912_fam10 ok. Processing mainboard/tyan/s2912_fam10 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/tyan/s2912_fam10/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_HAVE_FALLBACK_BOOT = 0x1 +CONFIG_HAVE_FALLBACK_BOOT = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0x0 -CONFIG_SERIAL_CPU_INIT = 0x1 +CONFIG_SERIAL_CPU_INIT = 0x0 -CONFIG_USE_FALLBACK_IMAGE = 0x1 +CONFIG_USE_FALLBACK_IMAGE = 0x0 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [109/117] tyan/s4880 ok. Processing mainboard/tyan/s4880 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 -CONFIG_RAMBASE = 0x4000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [110/117] tyan/s4882 ok. Processing mainboard/tyan/s4882 (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_CPU_SOCKET_TYPE = 0x10 +CONFIG_CPU_SOCKET_TYPE = 0x0 -CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x0 +CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 -CONFIG_ENABLE_APIC_EXT_ID = 0x1 +CONFIG_ENABLE_APIC_EXT_ID = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 +CONFIG_IOAPIC = 0x1 -CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x0 +CONFIG_K8_HT_FREQ_1G_SUPPORT = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_RAMBASE = 0x2000 +CONFIG_RAMBASE = 0x100000 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [111/117] via/epia-cn ok. Processing mainboard/via/epia-cn (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/via/epia-cn/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN700_VIDEO_MB_128MB = 0x0 +CONFIG_CN700_VIDEO_MB_16MB = 0x0 +CONFIG_CN700_VIDEO_MB_32MB = 0x1 +CONFIG_CN700_VIDEO_MB_64MB = 0x0 +CONFIG_CN700_VIDEO_MB_8MB = 0x0 +CONFIG_CN700_VIDEO_MB_OFF = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 [112/117] via/epia-m ok. Processing mainboard/via/epia-m (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/via/epia-m/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x8 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 [113/117] via/epia-m700 ok. Processing mainboard/via/epia-m700 (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/via/epia-m700/Config-abuild.lb ok Creating builddir...ok -CONFIG_DCACHE_RAM_SIZE = 0x2000 +CONFIG_DCACHE_RAM_SIZE = 0x8000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x0 -CONFIG_HEAP_SIZE = 0x5000 +CONFIG_HEAP_SIZE = 0x4000 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1019 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_USE_DCACHE_RAM = 0x1 +CONFIG_USE_DCACHE_RAM = 0x0 [114/117] via/epia-n ok. Processing mainboard/via/epia-n (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/via/epia-n/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN400_VIDEO_MB_128MB = 0x0 +CONFIG_CN400_VIDEO_MB_16MB = 0x0 +CONFIG_CN400_VIDEO_MB_32MB = 0x1 +CONFIG_CN400_VIDEO_MB_64MB = 0x0 +CONFIG_CN400_VIDEO_MB_8MB = 0x0 +CONFIG_CN400_VIDEO_MB_OFF = 0x0 -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_ACPI_TABLES = 0x1 +CONFIG_HAVE_HIGH_TABLES = 0x0 -CONFIG_HAVE_MAINBOARD_RESOURCES = 0x1 +CONFIG_HAVE_MAINBOARD_RESOURCES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 -CONFIG_SMP = 0x1 +CONFIG_SMP = 0x0 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0 [115/117] via/epia ok. Processing mainboard/via/epia (i386: ok, we're amd64 with a cross compiler) Creating config file... ok Creating builddir...ok -CONFIG_DCACHE_RAM_BASE = 0xc0000 -CONFIG_DCACHE_RAM_SIZE = 0x1000 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x7 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 -CONFIG_HAVE_INIT_TIMER = 0x0 +CONFIG_HAVE_INIT_TIMER = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x8 +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 -CONFIG_PCI_ROM_RUN = 0x0 +CONFIG_PCI_ROM_RUN = 0x1 -CONFIG_UDELAY_IO = 0x1 +CONFIG_UDELAY_IO = 0x0 -CONFIG_UDELAY_TSC = 0x0 +CONFIG_UDELAY_TSC = 0x1 -CONFIG_VGA_ROM_RUN = 0x0 +CONFIG_VGA_ROM_RUN = 0x1 [116/117] via/pc2500e ok. Processing mainboard/via/pc2500e (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/via/pc2500e/Config-abuild.lb ok Creating builddir...ok +CONFIG_CN700_VIDEO_MB_128MB = 0x0 +CONFIG_CN700_VIDEO_MB_16MB = 0x0 +CONFIG_CN700_VIDEO_MB_32MB = 0x1 +CONFIG_CN700_VIDEO_MB_64MB = 0x0 +CONFIG_CN700_VIDEO_MB_8MB = 0x0 +CONFIG_CN700_VIDEO_MB_OFF = 0x0 -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x9 +CONFIG_EPIA_VT8237R_INIT = 0x0 +CONFIG_FALLBACK_SIZE = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x1 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x1 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x9 -CONFIG_USE_OPTION_TABLE = 0x1 +CONFIG_USE_OPTION_TABLE = 0x0 [117/117] via/vt8454c ok. Processing mainboard/via/vt8454c (i386: ok, we're amd64 with a cross compiler) Using existing test target /srv/svn/coreboot-extra/tmp/coreboot-5071/targets/via/vt8454c/Config-abuild.lb ok Creating builddir...ok -CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 0x5 +CONFIG_HAVE_ACPI_TABLES = 0x1 -CONFIG_HAVE_HARD_RESET = 0x1 +CONFIG_HAVE_HARD_RESET = 0x0 +CONFIG_HAVE_HIGH_TABLES = 0x0 +CONFIG_HAVE_MP_TABLE = 0x1 +CONFIG_HAVE_PIRQ_TABLE = 0x1 -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 +CONFIG_IOAPIC = 0x0 -CONFIG_LOGICAL_CPUS = 0x0 +CONFIG_LOGICAL_CPUS = 0x1 -CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x0 +CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1019 -CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 0x5 -CONFIG_SMP = 0x1 +CONFIG_SMP = 0x0 -CONFIG_WRITE_HIGH_TABLES = 0x1 +CONFIG_WRITE_HIGH_TABLES = 0x0

1 0

[commit] r5072 - trunk/src/devices
by repository service 01 Feb '10

01 Feb '10

Author: stepan Date: Sun Jan 31 22:46:12 2010 New Revision: 5072 URL: http://tracker.coreboot.org/trac/coreboot/changeset/5072 Log: - Improve help texts for option ROM initialization methods - disallow REAL_MODE method if ARCH_X86 is not set. Signed-off-by: Stefan Reinauer <stepan(a)coresystems.de> Acked-by: Stefan Reinauer <stepan(a)coresystems.de> Modified: trunk/src/devices/Kconfig Modified: trunk/src/devices/Kconfig ============================================================================== --- trunk/src/devices/Kconfig Sun Jan 31 21:51:00 2010 (r5071) +++ trunk/src/devices/Kconfig Sun Jan 31 22:46:12 2010 (r5072) @@ -42,32 +42,50 @@ Examples include IDE/SATA controller option ROMs and option ROMs for network cards (NICs). -# TODO: Describe YABEL vs. x86emu differences in more detail. choice prompt "Option ROM execution type" - default PCI_OPTION_ROM_RUN_REALMODE + default PCI_OPTION_ROM_RUN_YABEL if !ARCH_X86 + default PCI_OPTION_ROM_RUN_REALMODE if ARCH_X86 depends on PCI_ROM_RUN || VGA_ROM_RUN config PCI_OPTION_ROM_RUN_REALMODE prompt "Real mode" bool + depends on ARCH_X86 help If you select this option, PCI option ROMs will be executed - natively on the hardware (a 32bit x86 system is required). + natively on the CPU in real mode. No CPU emulation is involved, + so this is the fastest, but also the least secure option. + (only works on x86/x64 systems) -config PCI_OPTION_ROM_RUN_YABEL - prompt "YABEL" +config PCI_OPTION_ROM_RUN_X86EMU + prompt "x86emu" bool help - If you select this option, the YABEL BIOS emulator will be used to - execute PCI option ROMs. + If you select this option, the x86emu CPU emulator will be used to + execute PCI option ROMs. + When choosing this option, x86emu will pass through all hardware + accesses to memory and IO devices to the underlying memory and IO + addresses. While this option prevents option ROMs from doing dirty + tricks with the CPU (such as installing SMM modules or hypervisors), + they can still access all devices in the system. + Choosing x86emu, option ROM execution is slower than native execution + in real mode, but faster than the full system emulation YABEL + This is the default choice for non-x86 systems. -config PCI_OPTION_ROM_RUN_X86EMU - prompt "x86emu" +config PCI_OPTION_ROM_RUN_YABEL + prompt "YABEL" bool help - If you select this option, the x86emu BIOS emulator will be used to + If you select this option, the YABEL system emulator will be used to execute PCI option ROMs. + YABEL consists of two parts: It uses x86emu for the CPU emulation and + additionally provides a PC system emulation that filters bad device and + memory access (such as PCI config space access to other devices than the + initialized one). + This option best prevents option ROMs from doing dirty tricks with the + system (such as installing SMM modules or hypervisors), but it is also + significantly slower than the other option ROM initialization methods. endchoice

1 0

← Newer
1
2
3
4
5
6
7
...
34
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

coreboot January 2010