Hello All,
It appears that the DSDT tables and the related ASL files are present for
few boareds in Linux BIOS. If so how are other boards expected to provide
the required DSDT table. Does it has to be taken care either by the kernel
or intiramfs ? Is Linux BIOS ACPI 3.0 compatible ?
The reason I am looking at this is for supporting PCIe hotplug which looks
for _OSC method. This has been specified in ACPI 3.0 spec.
Regards,
Phani
The attached patch is a unified version of the current ports of the
i82801 series currently in LinuxBIOS. Since most of the ports are nearly
identical, I've taken for each file and chosen the cleanest or best
version of the code, then checked over the datasheets to *some* of the
series, including the aa, ba, ca, and db, to make sure that it would
work. I've also made some changes here and there, mostly cleanup and
clarification. The only things left to look at are the huge difference
between this version's lpc init and the i82801er's, finding a better way
to select which chip is present on the board, and gpl headers in all
files. Anyways, comments, suggestions, even flames are welcome ;)
Testing on other chips can be done at this point as well, this is tested
and working on one model, the i82801aa.
-Corey
Dear LinuxBIOS readers!
This is the automated build check service of LinuxBIOS.
The developer "hailfinger" checked in revision 3027 to
the LinuxBIOS source repository and caused the following
changes:
Change Log:
All SPI chips mentioned in flashchips.c had their sector size listed as
page size. Fix that. Page size is uniform 256 bytes for SPI.
A sector/block size field in struct flashchip would be nice, though.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Acked-by: Corey Osgood <corey.osgood(a)gmail.com>
Build Log:
Compilation of amd:serengeti_cheetah_fam10 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=3027&device=serengeti_che…
If something broke during this checkin please be a pain
in hailfinger's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should
be backed out.
Best regards,
LinuxBIOS automatic build system
Dear LinuxBIOS readers!
This is the automated build check service of LinuxBIOS.
The developer "hailfinger" checked in revision 3026 to
the LinuxBIOS source repository and caused the following
changes:
Change Log:
Print the chip status register for all SPI chips on probe if verbose
output is specified.
Pretty-print the chip status register (including block lock information)
for ST M25P family and Macronix MX25L family chips.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Acked-by: Corey Osgood <corey.osgood(a)gmail.com>
Build Log:
Compilation of amd:serengeti_cheetah_fam10 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=3026&device=serengeti_che…
If something broke during this checkin please be a pain
in hailfinger's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should
be backed out.
Best regards,
LinuxBIOS automatic build system
Hello....
Advance happy New year......
ASRock K8Upgrade-VM800 motherboard is detecting SST49LF004A/B chip,but we are unable to write(flash).
what is the procedure for writting programe on
SST49LF004A/B chip.
we got a information like, remove the SST chip from its socket, strip the two ends of a small gauge wire, insert one end at pin 7(WP#)and the other at pin 32(VCC). Replace the chip, wedging the wires inplace is it necessory to flash the program in SST chip?
Please guide us........
Thanks,
Malatesh.
Dear LinuxBIOS readers!
This is the automated build check service of LinuxBIOS.
The developer "hailfinger" checked in revision 3025 to
the LinuxBIOS source repository and caused the following
changes:
Change Log:
Add 25VF016B support to flashrom. Untested, but verified against the
data sheet.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Acked-by: Corey Osgood <corey.osgood(a)gmail.com>
Build Log:
Compilation of amd:serengeti_cheetah_fam10 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=3025&device=serengeti_che…
If something broke during this checkin please be a pain
in hailfinger's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should
be backed out.
Best regards,
LinuxBIOS automatic build system
Hello....
Advance happy New year......
ASRock K8Upgrade-VM800 motherboard is detecting SST49LF004A/B chip,but we are unable to write(flash).
what is the procedure for writting programe on
SST49LF004A/B chip.
we got a information like, remove the SST chip from its socket, strip the two ends of a small gauge wire, insert one end at pin 7(WP#)and the other at pin 32(VCC). Replace the chip, wedging the wires inplace is it necessory to flash the program in SST chip?
Please guide us........
Thanks,
Malatesh.