[S] Change in coreboot[master]: mb/google/brya/var/gaelin: Add camera module settings

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/69963 )

Change subject: mb/google/brya/var/gaelin: Add camera module settings
......................................................................

mb/google/brya/var/gaelin: Add camera module settings

Modify USB2.0 port[4] settings to support camera.

BUG=b:238252678
BRANCH=firmware-brya-14505.B
TEST=with brask overlay changes, camera in camera app works

Change-Id: I42325b75e129429ee451ded6a2086fd3808e581a
Signed-off-by: Raymond Chung 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69963
Tested-by: build bot (Jenkins) 
Reviewed-by: Derek Huang 
Reviewed-by: Nick Vaccaro 
---
M src/mainboard/google/brya/variants/gaelin/gpio.c
M src/mainboard/google/brya/variants/gaelin/overridetree.cb
2 files changed, 31 insertions(+), 2 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Nick Vaccaro: Looks good to me, approved
  Raymond Chung: Looks good to me, but someone else must approve
  Derek Huang: Looks good to me, but someone else must approve

diff --git a/src/mainboard/google/brya/variants/gaelin/gpio.c b/src/mainboard/google/brya/variants/gaelin/gpio.c
index a20e385..1438975 100644
--- a/src/mainboard/google/brya/variants/gaelin/gpio.c
+++ b/src/mainboard/google/brya/variants/gaelin/gpio.c
@@ -10,7 +10,7 @@
    /* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */
    PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
    /* A17 : DISP_MISCC ==> EN_FCAM_PWR */
-	PAD_CFG_GPO(GPP_A17, 0, DEEP),
+	PAD_CFG_GPO(GPP_A17, 1, DEEP),
    /* A19 : DDSP_HPD1 ==> NC */
    PAD_NC(GPP_A19, NONE),
    /* A20 : DDSP_HPD2 ==> NC */
@@ -62,7 +62,7 @@
    /* E5  : SATA_DEVSLP1 ==> USB_A1_RT_RST_ODL */
    PAD_CFG_GPO(GPP_E5, 1, DEEP),
    /* E7  : PROC_GP1 ==> EN_MIC_PWR */
-	PAD_CFG_GPO(GPP_E7, 0, DEEP),
+	PAD_CFG_GPO(GPP_E7, 1, DEEP),
    /* E14 : DDSP_HPDA ==> EDP_HPD */
    PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1),
    /* E15 : RSVD_TP ==> PCH_WP_OD */
diff --git a/src/mainboard/google/brya/variants/gaelin/overridetree.cb b/src/mainboard/google/brya/variants/gaelin/overridetree.cb
index dcb695f..57079f3 100644
--- a/src/mainboard/google/brya/variants/gaelin/overridetree.cb
+++ b/src/mainboard/google/brya/variants/gaelin/overridetree.cb
@@ -2,6 +2,7 @@

register "usb2_ports[2]" = "USB2_PORT_EMPTY"
    register "usb2_ports[3]" = "USB2_PORT_EMPTY"
+	register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)"	# UFCamera

register "usb3_ports[2]" = "USB3_PORT_EMPTY"
    register "usb3_ports[3]" = "USB3_PORT_EMPTY"
@@ -101,6 +102,14 @@
    					device ref usb2_port2 on end
    				end
    				chip drivers/usb/acpi
+						register "desc" = ""UFCamera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "has_power_resource" = "1"
+						register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A17)"
+						register "enable_delay_ms" = "20"
+						device ref usb2_port5 on end
+					end
+					chip drivers/usb/acpi
    					register "desc" = ""USB2 Type-A Port A3 (MLB)""
    					register "type" = "UPC_TYPE_A"
    					register "use_custom_pld" = "true"