Patch set updated for coreboot: f57ee78 ASRock IMB-A180: Add new AMD Embedded G-Series SOC mainboard
Siyuan Wang (wangsiyuanbuaa@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3880
-gerrit
commit f57ee786760cb8e1136dd18365b881d89feb9d1e Author: WANG Siyuan wangsiyuanbuaa@gmail.com Date: Tue Aug 13 17:09:51 2013 +0800
ASRock IMB-A180: Add new AMD Embedded G-Series SOC mainboard
Tested on Ubuntu 12.10. S3 is supported. No HD Audio. Mainboard details: http://www.asrock.com/ipc/overview.asp?Model=IMB-A180
Change-Id: I75254194ab5da8e5c61383d8f85aa4e300815637 Signed-off-by: WANG Siyuan SiYuan.Wang@amd.com Signed-off-by: WANG Siyuan wangsiyuanbuaa@gmail.com --- src/mainboard/asrock/Kconfig | 3 + src/mainboard/asrock/imb-a180/BiosCallOuts.c | 294 ++++++++ src/mainboard/asrock/imb-a180/BiosCallOuts.h | 31 + src/mainboard/asrock/imb-a180/Kconfig | 108 +++ src/mainboard/asrock/imb-a180/Makefile.inc | 28 + src/mainboard/asrock/imb-a180/OptionsIds.h | 67 ++ src/mainboard/asrock/imb-a180/PlatformGnbPcie.c | 154 ++++ .../asrock/imb-a180/PlatformGnbPcieComplex.h | 32 + src/mainboard/asrock/imb-a180/acpi/AmdImc.asl | 114 +++ src/mainboard/asrock/imb-a180/acpi/gpe.asl | 78 +++ src/mainboard/asrock/imb-a180/acpi/ide.asl | 250 +++++++ src/mainboard/asrock/imb-a180/acpi/mainboard.asl | 34 + src/mainboard/asrock/imb-a180/acpi/routing.asl | 198 ++++++ src/mainboard/asrock/imb-a180/acpi/sata.asl | 150 ++++ src/mainboard/asrock/imb-a180/acpi/si.asl | 27 + src/mainboard/asrock/imb-a180/acpi/sleep.asl | 89 +++ src/mainboard/asrock/imb-a180/acpi/superio.asl | 20 + src/mainboard/asrock/imb-a180/acpi/thermal.asl | 20 + src/mainboard/asrock/imb-a180/acpi/usb_oc.asl | 132 ++++ src/mainboard/asrock/imb-a180/acpi_tables.c | 333 +++++++++ src/mainboard/asrock/imb-a180/agesawrapper.c | 771 +++++++++++++++++++++ src/mainboard/asrock/imb-a180/agesawrapper.h | 97 +++ src/mainboard/asrock/imb-a180/buildOpts.c | 505 ++++++++++++++ src/mainboard/asrock/imb-a180/cmos.layout | 114 +++ src/mainboard/asrock/imb-a180/devicetree.cb | 76 ++ src/mainboard/asrock/imb-a180/dsdt.asl | 84 +++ src/mainboard/asrock/imb-a180/get_bus_conf.c | 143 ++++ src/mainboard/asrock/imb-a180/irq_tables.c | 112 +++ src/mainboard/asrock/imb-a180/mainboard.c | 51 ++ src/mainboard/asrock/imb-a180/mptable.c | 245 +++++++ src/mainboard/asrock/imb-a180/romstage.c | 200 ++++++ 31 files changed, 4560 insertions(+)
diff --git a/src/mainboard/asrock/Kconfig b/src/mainboard/asrock/Kconfig index 6b4495c..9b3f63f 100644 --- a/src/mainboard/asrock/Kconfig +++ b/src/mainboard/asrock/Kconfig @@ -25,11 +25,14 @@ config BOARD_ASROCK_939A785GMH bool "939A785GMH/128M" config BOARD_ASROCK_E350M1 bool "E350M1" +config BOARD_ASROCK_IMB_A180 + bool "IMB-A180"
endchoice
source "src/mainboard/asrock/939a785gmh/Kconfig" source "src/mainboard/asrock/e350m1/Kconfig" +source "src/mainboard/asrock/imb-a180/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/asrock/imb-a180/BiosCallOuts.c b/src/mainboard/asrock/imb-a180/BiosCallOuts.c new file mode 100644 index 0000000..c307e91 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/BiosCallOuts.c @@ -0,0 +1,294 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "agesawrapper.h" +#include "amdlib.h" +#include "BiosCallOuts.h" +#include "Ids.h" +#include "OptionsIds.h" +#include "heapManager.h" +#include "FchPlatform.h" +#include "cbfs.h" + +STATIC CONST BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_ALLOCATE_BUFFER, fam16kb_AllocateBuffer }, + {AGESA_DEALLOCATE_BUFFER, fam16kb_DeallocateBuffer }, + {AGESA_DO_RESET, fam16kb_Reset }, + {AGESA_LOCATE_BUFFER, fam16kb_LocateBuffer }, + {AGESA_READ_SPD, fam16kb_ReadSpd }, + {AGESA_READ_SPD_RECOVERY, fam16kb_DefaultRet }, + {AGESA_RUNFUNC_ONAP, fam16kb_RunFuncOnAp }, + {AGESA_GET_IDS_INIT_DATA, fam16kb_GetIdsInitData }, + {AGESA_HOOKBEFORE_DQS_TRAINING, fam16kb_HookBeforeDQSTraining }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, fam16kb_HookBeforeExitSelfRefresh }, + {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, + {AGESA_GNB_GFX_GET_VBIOS_IMAGE, fam16kb_HookGfxGetVbiosImage } +}; + +AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + UINTN i; + AGESA_STATUS CalloutStatus; + UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]); + + for (i = 0; i < CallOutCount; i++) + { + if (BiosCallouts[i].CalloutName == Func) + break; + } + + if(i >= CallOutCount) + return AGESA_UNSUPPORTED; + + CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr); + + return CalloutStatus; +} + +/** + * AMD imb_a180 Platform ALC272 Verb Table + */ +static const CODEC_ENTRY imb_a180_Alc662_VerbTbl[] = { + {0xFF, 0xFFFFFFFF} +}; + +static const CODEC_TBL_LIST imb_a180CodecTableList[] = +{ + {0x10ec0662, (CODEC_ENTRY*)&imb_a180_Alc662_VerbTbl[0]}, + {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} +}; + +#define FAN_INPUT_INTERNAL_DIODE 0 +#define FAN_INPUT_TEMP0 1 +#define FAN_INPUT_TEMP1 2 +#define FAN_INPUT_TEMP2 3 +#define FAN_INPUT_TEMP3 4 +#define FAN_INPUT_TEMP0_FILTER 5 +#define FAN_INPUT_ZERO 6 +#define FAN_INPUT_DISABLED 7 + +#define FAN_AUTOMODE (1 << 0) +#define FAN_LINEARMODE (1 << 1) +#define FAN_STEPMODE ~(1 << 1) +#define FAN_POLARITY_HIGH (1 << 2) +#define FAN_POLARITY_LOW ~(1 << 2) + +/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ +#define FREQ_28KHZ 0x0 +#define FREQ_25KHZ 0x1 +#define FREQ_23KHZ 0x2 +#define FREQ_21KHZ 0x3 +#define FREQ_29KHZ 0x4 +#define FREQ_18KHZ 0x5 +#define FREQ_100HZ 0xF7 +#define FREQ_87HZ 0xF8 +#define FREQ_58HZ 0xF9 +#define FREQ_44HZ 0xFA +#define FREQ_35HZ 0xFB +#define FREQ_29HZ 0xFC +#define FREQ_22HZ 0xFD +#define FREQ_14HZ 0xFE +#define FREQ_11HZ 0xFF + +/* imb_a180 Hardware Monitor Fan Control + * Hardware limitation: + * HWM failed to read the input temperture vi I2C, + * if other software switch the I2C switch by mistake or intention. + * We recommend to using IMC to control Fans, instead of HWM. + */ +#if 0 +static void oem_fan_control(FCH_DATA_BLOCK *FchParams) +{ + FCH_HWM_FAN_CTR oem_factl[5] = { + /*temperatuer input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */ + /* imb_a180 FanOUT0 Fan header J32 */ + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + /* imb_a180 FanOUT1 Fan header J31*/ + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + }; + LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader); + + /* Enable IMC fan control. the recommand way */ +#if defined CONFIG_HUDSON_IMC_FWM && (CONFIG_HUDSON_IMC_FWM == 1) + /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */ + FchParams->Hwm.HwMonitorEnable = TRUE; + FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */ + + FchParams->Imc.ImcEnable = TRUE; + FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ + FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */ + + LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); + + /* Thermal Zone Parameter */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 | BIT2 | BIT5; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 | BIT3; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0; + + /* IMC Fan Policy temperature thresholds */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80; /*AC0 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0; /*AC1 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0; /*AC2 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; + + /* IMC Fan Policy PWM Settings */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0; /* AL0 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0; /* AL1 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0; /* AL2 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00; /* AL3 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00; /* AL4 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00; /* AL5 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00; /* AL6 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00; /* AL7 percentage */ + + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */ + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 | BIT2 | BIT5; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0; + + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00; + + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */ + + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */ + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */ + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0; + + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */ + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0; + + /* IMC Function */ + FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8; + + /* NOTE: + * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege, + * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it. + * so we remove it from AGESA code. Please Seee FchInitLateHwm. + */ + +#else /* HWM fan control, the way not recommand */ + FchParams->Imc.ImcEnable = FALSE; + FchParams->Hwm.HwMonitorEnable = TRUE; + FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */ + +#endif /* CONFIG_HUDSON_IMC_FWM */ +} +#endif + +/** + * Fch Oem setting callback + * + * Configure platform specific Hudson device, + * such Azalia, SATA, IMC etc. + */ +AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr) +{ + FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *)FchData; + + if (FchParams->StdHeader->Func == AMD_INIT_RESET) { + //FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *) FchData; + printk(BIOS_DEBUG, "Fch OEM config in INIT RESET "); + //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */ + } else if (FchParams->StdHeader->Func == AMD_INIT_ENV) { + FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData; + printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); + + /* Azalia Controller OEM Codec Table Pointer */ + FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&imb_a180CodecTableList[0]); + /* Azalia Controller Front Panel OEM Table Pointer */ + + /* Fan Control */ + //oem_fan_control(FchParams_env); + + /* XHCI configuration */ +#if CONFIG_HUDSON_XHCI_ENABLE + FchParams_env->Usb.Xhci0Enable = TRUE; +#else + FchParams_env->Usb.Xhci0Enable = FALSE; +#endif + FchParams_env->Usb.Xhci1Enable = FALSE; + + /* sata configuration */ + } + printk(BIOS_DEBUG, "Done\n"); + + return AGESA_SUCCESS; +} diff --git a/src/mainboard/asrock/imb-a180/BiosCallOuts.h b/src/mainboard/asrock/imb-a180/BiosCallOuts.h new file mode 100644 index 0000000..4c7e100 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/BiosCallOuts.h @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _BIOS_CALLOUT_H_ +#define _BIOS_CALLOUT_H_ + +#include <northbridge/amd/agesa/family16kb/fam16kb_callouts.h> + +/* CALLOUT Initialization */ +AGESA_STATUS GetBiosCallout(UINT32 Func, UINT32 Data, VOID *ConfigPtr); + +/* FCH OEM Config*/ +AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr); + +#endif //_BIOS_CALLOUT_H_ diff --git a/src/mainboard/asrock/imb-a180/Kconfig b/src/mainboard/asrock/imb-a180/Kconfig new file mode 100644 index 0000000..91e83b1 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/Kconfig @@ -0,0 +1,108 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +if BOARD_ASROCK_IMB_A180 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select ARCH_X86 + select CPU_AMD_AGESA_FAMILY16_KB + select NORTHBRIDGE_AMD_AGESA_FAMILY16_KB + select SOUTHBRIDGE_AMD_AGESA_YANGTZE + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_RESUME + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select LIFT_BSP_APIC_ID + select SERIAL_CPU_INIT + select AMDMCT + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_4096 + select GFXUMA + +config MAINBOARD_DIR + string + default asrock/imb-a180 + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "IMB-A180" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 4 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config MEM_TRAIN_SEQ + int + default 2 + +config IRQ_SLOT_COUNT + int + default 11 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config ACPI_SSDTX_NUM + int + default 0 + +config RAMBASE + hex + default 0x200000 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config HUDSON_LEGACY_FREE + bool + default y + +# bit 1,0 - pin 0 +# bit 3,2 - pin 1 +# bit 5,4 - pin 2 +# bit 7,6 - pin 3 +config AZ_PIN + hex + default 0x2 + +endif # BOARD_ASROCK_IMB_A180 diff --git a/src/mainboard/asrock/imb-a180/Makefile.inc b/src/mainboard/asrock/imb-a180/Makefile.inc new file mode 100644 index 0000000..a83297a --- /dev/null +++ b/src/mainboard/asrock/imb-a180/Makefile.inc @@ -0,0 +1,28 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +romstage-y += buildOpts.c +romstage-y += agesawrapper.c +romstage-y += BiosCallOuts.c +romstage-y += PlatformGnbPcie.c + +ramstage-y += buildOpts.c +ramstage-y += agesawrapper.c +ramstage-y += BiosCallOuts.c +ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/asrock/imb-a180/OptionsIds.h b/src/mainboard/asrock/imb-a180/OptionsIds.h new file mode 100644 index 0000000..0a1d328 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/OptionsIds.h @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_CONTROL_ENABLED TRUE +//#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE +//#define IDSOPT_PERF_ANALYSIS TRUE +#define IDSOPT_ASSERT_ENABLED TRUE +//#undef IDSOPT_DEBUG_ENABLED +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/asrock/imb-a180/PlatformGnbPcie.c b/src/mainboard/asrock/imb-a180/PlatformGnbPcie.c new file mode 100644 index 0000000..24d8381 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/PlatformGnbPcie.c @@ -0,0 +1,154 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "heapManager.h" +#include "PlatformGnbPcieComplex.h" +#include "Filecode.h" + +#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE + +static const PCIe_PORT_DESCRIPTOR PortList [] = { + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 3, 3), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 5, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x01, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */ + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 2), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 4, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x02, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */ + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 1, 1), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 3, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x03, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 0), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 2, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x04, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */ + { + DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 1, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x05, 0) + } +}; + +static const PCIe_DDI_DESCRIPTOR DdiList [] = { + /* DP0 to HDMI0/DP */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux1, Hdp1) + }, + /* DP1 to FCH */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2) + }, + /* DP2 to HDMI1/DP */ + { + DESCRIPTOR_TERMINATE_LIST, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 16, 19), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux3, Hdp3) + }, +}; + +static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { + .Flags = DESCRIPTOR_TERMINATE_LIST, + .SocketId = 0, + .PciePortList = PortList, + .DdiLinkList = DdiList +}; + +/*---------------------------------------------------------------------------------------*/ +/** + * OemCustomizeInitEarly + * + * Description: + * This is the stub function will call the host environment through the binary block + * interface (call-out port) to provide a user hook opportunity + * + * Parameters: + * @param[in] **PeiServices + * @param[in] *InitEarly + * + * @retval VOID + * + **/ +/*---------------------------------------------------------------------------------------*/ +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ) +{ + AGESA_STATUS Status; + PCIe_COMPLEX_DESCRIPTOR *PcieComplexListPtr; + + ALLOCATE_HEAP_PARAMS AllocHeapParams; + + /* GNB PCIe topology Porting */ + + /* */ + /* Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR */ + /* */ + AllocHeapParams.RequestedBufferSize = sizeof(PcieComplex); + + AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); + if ( Status!= AGESA_SUCCESS) { + /* Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR */ + ASSERT(FALSE); + return; + } + + PcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; + LibAmdMemCopy (PcieComplexListPtr, &PcieComplex, sizeof(PcieComplex), &InitEarly->StdHeader); + InitEarly->GnbConfig.PcieComplexList = PcieComplexListPtr; +} diff --git a/src/mainboard/asrock/imb-a180/PlatformGnbPcieComplex.h b/src/mainboard/asrock/imb-a180/PlatformGnbPcieComplex.h new file mode 100644 index 0000000..1db8b2d --- /dev/null +++ b/src/mainboard/asrock/imb-a180/PlatformGnbPcieComplex.h @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H +#define _PLATFORM_GNB_PCIE_COMPLEX_H + +#include "Porting.h" +#include "AGESA.h" +#include "amdlib.h" + +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ); + +#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/asrock/imb-a180/acpi/AmdImc.asl b/src/mainboard/asrock/imb-a180/acpi/AmdImc.asl new file mode 100644 index 0000000..074dd7c --- /dev/null +++ b/src/mainboard/asrock/imb-a180/acpi/AmdImc.asl @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +//BTDC Due to IMC Fan, ACPI control codes +OperationRegion(IMIO, SystemIO, 0x3E, 0x02) +Field(IMIO , ByteAcc, NoLock, Preserve) { + IMCX,8, + IMCA,8 +} + +IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) { + Offset(0x80), + MSTI, 8, + MITS, 8, + MRG0, 8, + MRG1, 8, + MRG2, 8, + MRG3, 8, +} + +Method(WACK, 0) +{ + Store(0, Local0) + While (LNotEqual(Local0, 0xFA)) { + Store(MRG0, Local0) + Sleep(10) + } +} + +//Init +Method (ITZE, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} + +//Sleep +Method (IMSP, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(1, MRG1) + Store(0, MRG2) + Store(0x98, MSTI) + WACK() + + Store(0, MRG0) + Store(0xB4, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() +} + +//Wake +Method (IMWK, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} diff --git a/src/mainboard/asrock/imb-a180/acpi/gpe.asl b/src/mainboard/asrock/imb-a180/acpi/gpe.asl new file mode 100644 index 0000000..f294502 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/acpi/gpe.asl @@ -0,0 +1,78 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope(_GPE) { /* Start Scope GPE */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PCI0.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + /* Notify (_TZ.TZ00, 0x80) */ + } + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } +} /* End Scope GPE */ diff --git a/src/mainboard/asrock/imb-a180/acpi/ide.asl b/src/mainboard/asrock/imb-a180/acpi/ide.asl new file mode 100644 index 0000000..853dc13 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/acpi/ide.asl @@ -0,0 +1,250 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No IDE functionality */ + +#if 0 +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + /* save total time of primary PIO master timing to PIO spd0 */ + Store(GTTM(PPTM), PSD0) + /* save total time of primary PIO slave Timing to PIO spd1 */ + Store(GTTM(PPTS), PSD1) + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} +#endif diff --git a/src/mainboard/asrock/imb-a180/acpi/mainboard.asl b/src/mainboard/asrock/imb-a180/acpi/mainboard.asl new file mode 100644 index 0000000..5487b79 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/acpi/mainboard.asl @@ -0,0 +1,34 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Memory related values */ +Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ +Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ +Name(PBLN, 0x0) /* Length of BIOS area */ + +Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ +Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ +Name(HPBA, 0xFED00000) /* Base address of HPET table */ + +Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + +/* Some global data */ +Name(OSTP, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ +Name(OSV, Ones) /* Assume nothing */ +Name(PMOD, One) /* Assume APIC */ diff --git a/src/mainboard/asrock/imb-a180/acpi/routing.asl b/src/mainboard/asrock/imb-a180/acpi/routing.asl new file mode 100644 index 0000000..babf6ba --- /dev/null +++ b/src/mainboard/asrock/imb-a180/acpi/routing.asl @@ -0,0 +1,198 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - F16 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */ + Package(){0x0001FFFF, 0, INTB, 0 }, + Package(){0x0001FFFF, 1, INTC, 0 }, + + + /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + + /* FCH devices */ + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ + /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, INTC, 0 }, + Package(){0x0010FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, INTD, 0 }, + +}) + +Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - F15 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + Package(){0x0001FFFF, 0, 0, 17 }, + Package(){0x0001FFFF, 1, 0, 18 }, + + /* Bus 0, Dev 2 - PCIe Bridges */ + Package(){0x0002FFFF, 0, 0, 18 }, + Package(){0x0002FFFF, 1, 0, 19 }, + Package(){0x0002FFFF, 2, 0, 16 }, + Package(){0x0002FFFF, 3, 0, 17 }, + + + /* SB devices in APIC mode */ + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ + /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, 0, 0x12}, + Package(){0x0010FFFF, 1, 0, 0x11}, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, 0, 19 }, + +}) + +Name(PS2, Package(){ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, +}) +Name(APS2, Package(){ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, +}) + +/* GFX */ +Name(PS4, Package(){ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, +}) +Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, +}) + +/* GPP 0 */ +Name(PS5, Package(){ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, +}) +Name(APS5, Package(){ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, +}) + +/* GPP 1 */ +Name(PS6, Package(){ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, +}) +Name(APS6, Package(){ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, +}) + +/* GPP 2 */ +Name(PS7, Package(){ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, +}) +Name(APS7, Package(){ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, +}) + +/* GPP 3 */ +Name(PS8, Package(){ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, +}) +Name(APS8, Package(){ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 18 }, +}) + diff --git a/src/mainboard/asrock/imb-a180/acpi/sata.asl b/src/mainboard/asrock/imb-a180/acpi/sata.asl new file mode 100644 index 0000000..3d19222 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/acpi/sata.asl @@ -0,0 +1,150 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No SATA functionality */ + +#if 0 +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} +#endif diff --git a/src/mainboard/asrock/imb-a180/acpi/si.asl b/src/mainboard/asrock/imb-a180/acpi/si.asl new file mode 100644 index 0000000..3cc2170 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/acpi/si.asl @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } +} /* End Scope SI */ diff --git a/src/mainboard/asrock/imb-a180/acpi/sleep.asl b/src/mainboard/asrock/imb-a180/acpi/sleep.asl new file mode 100644 index 0000000..dd0d9a4 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/acpi/sleep.asl @@ -0,0 +1,89 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* _PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +* Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ +Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + Store(7, UPWS) +} /* End Method(_PTS) */ + +/* +* _BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* _WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + Return(WKST) +} /* End Method(_WAK) */ diff --git a/src/mainboard/asrock/imb-a180/acpi/superio.asl b/src/mainboard/asrock/imb-a180/acpi/superio.asl new file mode 100755 index 0000000..ec72e36 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/acpi/superio.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No Super I/O device or functionality yet */ diff --git a/src/mainboard/asrock/imb-a180/acpi/thermal.asl b/src/mainboard/asrock/imb-a180/acpi/thermal.asl new file mode 100755 index 0000000..0466a1b --- /dev/null +++ b/src/mainboard/asrock/imb-a180/acpi/thermal.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No thermal zone functionality */ diff --git a/src/mainboard/asrock/imb-a180/acpi/usb_oc.asl b/src/mainboard/asrock/imb-a180/acpi/usb_oc.asl new file mode 100644 index 0000000..7b5b1c6 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/acpi/usb_oc.asl @@ -0,0 +1,132 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ + +/* USB overcurrent mapping pins. */ +Name(UOM0, 0) +Name(UOM1, 2) +Name(UOM2, 0) +Name(UOM3, 7) +Name(UOM4, 2) +Name(UOM5, 2) +Name(UOM6, 6) +Name(UOM7, 2) +Name(UOM8, 6) +Name(UOM9, 6) + +/* USB Overcurrent GPEs */ + +#if 0 /* TODO: Update for imba180 */ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + } + } +} +#endif diff --git a/src/mainboard/asrock/imb-a180/acpi_tables.c b/src/mainboard/asrock/imb-a180/acpi_tables.c new file mode 100644 index 0000000..b5ae758 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/acpi_tables.c @@ -0,0 +1,333 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include "agesawrapper.h" +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam16.h> + +#include "agesawrapper.h" + +#define DUMP_ACPI_TABLES 0 + +#if DUMP_ACPI_TABLES == 1 + +static void dump_mem(u32 start, u32 end) +{ + u32 i; + print_debug("dump_mem:"); + for (i = start; i < end; i++) { + if ((i & 0xf) == 0) { + printk(BIOS_DEBUG, "\n%08x:", i); + } + printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i)); + } + print_debug("\n"); +} +#endif + +extern const unsigned char AmlCode[]; + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB800 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, + IO_APIC_ADDR, 0); + + /* TODO: Remove the hardcode */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1, + 0xFEC20000, 24); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edige-triggered, Active high */ + + /* create all subtables for processors */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long acpi_fill_hest(acpi_hest_t *hest) +{ + void *addr, *current; + + /* Skip the HEST header. */ + current = (void *)(hest + 1); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + return (unsigned long)current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + /* Not implemented */ + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + int lens; + msr_t msr; + char pscope[] = "\_SB.PCI0"; + + lens = acpigen_write_scope(pscope); + msr = rdmsr(TOP_MEM); + lens += acpigen_write_name_dword("TOM1", msr.lo); + msr = rdmsr(TOP_MEM2); + /* + * Since XP only implements parts of ACPI 2.0, we can't use a qword + * here. + * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt + * slide 22ff. + * Shift value right by 20 bit to make it fit into 32bit, + * giving us 1MB granularity and a limit of almost 4Exabyte of memory. + */ + lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); + acpigen_patch_len(lens - 1); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + acpi_header_t *alib; + acpi_header_t *ivrs; + acpi_hest_t *hest; + + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; /* it will used by fadt */ + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ /* it needs 64 bit alignment */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; /* it will be used by fadt */ + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* HEST */ + current = ALIGN(current, 8); + hest = (acpi_hest_t *)current; + acpi_write_hest((void *)current); + acpi_add_table(rsdp, (void *)current); + current += ((acpi_header_t *)current)->length; + + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current); + ivrs = agesawrapper_getlateinitptr(PICK_IVRS); + if (ivrs != NULL) { + memcpy((void *)current, ivrs, ivrs->length); + ivrs = (acpi_header_t *) current; + current += ivrs->length; + acpi_add_table(rsdp, ivrs); + } else { + printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n"); + } + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); + if (srat != NULL) { + memcpy((void *)current, srat, srat->header.length); + srat = (acpi_srat_t *) current; + current += srat->header.length; + acpi_add_table(rsdp, srat); + } else { + printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); + } + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); + if (slit != NULL) { + memcpy((void *)current, slit, slit->header.length); + slit = (acpi_slit_t *) current; + current += slit->header.length; + acpi_add_table(rsdp, slit); + } else { + printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); + } + + /* ALIB */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); + alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); + if (alib != NULL) { + memcpy((void *)current, alib, alib->length); + alib = (acpi_header_t *) current; + current += alib->length; + acpi_add_table(rsdp, (void *)alib); + } + else { + printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); + } + + /* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */ + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); + ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); + if (ssdt != NULL) { + memcpy((void *)current, ssdt, ssdt->length); + ssdt = (acpi_header_t *) current; + current += ssdt->length; + } + else { + printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n"); + } + acpi_add_table(rsdp,ssdt); + + printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); + + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + +#if DUMP_ACPI_TABLES == 1 + printk(BIOS_DEBUG, "rsdp\n"); + dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); + + printk(BIOS_DEBUG, "rsdt\n"); + dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); + + printk(BIOS_DEBUG, "madt\n"); + dump_mem(madt, ((void *)madt) + madt->header.length); + + printk(BIOS_DEBUG, "srat\n"); + dump_mem(srat, ((void *)srat) + srat->header.length); + + printk(BIOS_DEBUG, "slit\n"); + dump_mem(slit, ((void *)slit) + slit->header.length); + + printk(BIOS_DEBUG, "ssdt\n"); + dump_mem(ssdt, ((void *)ssdt) + ssdt->length); + + printk(BIOS_DEBUG, "fadt\n"); + dump_mem(fadt, ((void *)fadt) + fadt->header.length); + + printk(BIOS_DEBUG, "hest\n"); + dump_mem(hest, ((void *)hest) + hest->header.length); +#endif + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/asrock/imb-a180/agesawrapper.c b/src/mainboard/asrock/imb-a180/agesawrapper.c new file mode 100644 index 0000000..06405ad --- /dev/null +++ b/src/mainboard/asrock/imb-a180/agesawrapper.c @@ -0,0 +1,771 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ + +#include <stdint.h> +#include <string.h> +#include "agesawrapper.h" +#include "BiosCallOuts.h" +#include "cpuRegisters.h" +#include "cpuCacheInit.h" +#include "cpuApicUtilities.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "Dispatcher.h" +#include "cpuCacheInit.h" +#include "amdlib.h" +#include "PlatformGnbPcieComplex.h" +#include "Filecode.h" +#include "heapManager.h" +#include "FchPlatform.h" +#include "Fch.h" +#include <cpu/amd/agesa/s3_resume.h> +#include <cbmem.h> +#include <arch/acpi.h> +#include <arch/io.h> + +VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr); +VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr); + +#define FILECODE UNASSIGNED_FILE_FILECODE + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ + +/* ACPI table pointers returned by AmdInitLate */ +VOID *DmiTable = NULL; +VOID *AcpiPstate = NULL; +VOID *AcpiSrat = NULL; +VOID *AcpiSlit = NULL; + +VOID *AcpiWheaMce = NULL; +VOID *AcpiWheaCmc = NULL; +VOID *AcpiAlib = NULL; +VOID *AcpiIvrs = NULL; + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*--------------------------------------------------------------------------------------- + * L O C A L F U N C T I O N S + *--------------------------------------------------------------------------------------- + */ +UINT32 +agesawrapper_amdinitcpuio ( + VOID + ) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* Enable legacy video routing: D18F1xF4 VGA Enable */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); + PciData = 1; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* The platform BIOS needs to ensure the memory ranges of SB800 legacy + * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are + * set to non-posted regions. + */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); + PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */ + PciData |= 1 << 7; /* set NP (non-posted) bit */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); + PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Map the remaining PCI hole as posted MMIO */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); + PciData = 0x00FECF00; /* last address before non-posted range */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); + MsrReg = (MsrReg >> 8) | 3; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); + PciData = (UINT32)MsrReg; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Send all IO (0000-FFFF) to southbridge. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); + PciData = 0x0000F000; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); + PciData = 0x00000003; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + Status = AGESA_SUCCESS; + return (UINT32)Status; +} + +UINT32 +agesawrapper_amdinitmmio ( + VOID + ) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* + Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base + Address MSR register. + */ + MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; + LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); + + /* + Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. + */ + LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); + MsrReg = MsrReg | 0x0000400000000000; + LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); + + /* For serial port */ + PciData = 0xFF03FFD5; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Set ROM cache onto WP to decrease post time */ + MsrReg = (0x0100000000ull - CONFIG_ROM_SIZE) | 5ull; + LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader); + MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CONFIG_ROM_SIZE) | 0x800ull; + LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader); + + Status = AGESA_SUCCESS; + return (UINT32)Status; +} + +UINT32 +agesawrapper_amdinitreset ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESET_PARAMS AmdResetParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + LibAmdMemFill (&AmdResetParams, + 0, + sizeof (AMD_RESET_PARAMS), + &(AmdResetParams.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; + AmdParamStruct.AllocationMethod = ByHost; + AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); + AmdParamStruct.NewStructPtr = &AmdResetParams; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + AmdResetParams.HtConfig.Depth = 0; +#if !CONFIG_HUDSON_XHCI_ENABLE + AmdResetParams.FchInterface.Xhci0Enable = FALSE; +#endif + AmdResetParams.FchInterface.Xhci1Enable = FALSE; + + status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + return (UINT32)status; +} + +UINT32 +agesawrapper_amdinitearly ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_EARLY_PARAMS *AmdEarlyParamsPtr; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; + OemCustomizeInitEarly (AmdEarlyParamsPtr); + + status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return (UINT32)status; +} + +UINT32 GetHeapBase( + AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT32 heap; + +#if CONFIG_HAVE_ACPI_RESUME + /* Both romstage and ramstage has this S3 detect. */ + if (acpi_get_sleep_type() == 3) + heap = (UINT32)cbmem_find(CBMEM_ID_RESUME_SCRATCH) + (CONFIG_HIGH_SCRATCH_MEMORY_SIZE - BIOS_HEAP_SIZE); /* base + high_stack_size */ + else +#endif + heap = BIOS_HEAP_START_ADDRESS; /* Low mem */ + + return heap; +} + +UINT32 +agesawrapper_amdinitpost ( + VOID + ) +{ + AGESA_STATUS status; + UINT16 i; + UINT32 *HeadPtr; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_POST_PARAMS *PostParams; + BIOS_HEAP_MANAGER *BiosManagerPtr; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr; + status = AmdInitPost (PostParams); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + /* Initialize heap space */ + BiosManagerPtr = (BIOS_HEAP_MANAGER *)GetHeapBase(&AmdParamStruct.StdHeader); + + HeadPtr = (UINT32 *) ((UINT8 *) BiosManagerPtr + sizeof (BIOS_HEAP_MANAGER)); + for (i = 0; i < ((BIOS_HEAP_SIZE/4) - (sizeof (BIOS_HEAP_MANAGER)/4)); i++) + { + *HeadPtr = 0x00000000; + HeadPtr++; + } + BiosManagerPtr->StartOfAllocatedNodes = 0; + BiosManagerPtr->StartOfFreedNodes = 0; + + return (UINT32)status; +} + +UINT32 +agesawrapper_amdinitenv ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_ENV_PARAMS *EnvParam; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + status = AmdCreateStruct (&AmdParamStruct); + EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr; + + status = AmdInitEnv (EnvParam); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus); + /* Initialize Subordinate Bus Number and Secondary Bus Number + * In platform BIOS this address is allocated by PCI enumeration code + Modify D1F0x18 + */ + + return (UINT32)status; +} + +VOID * +agesawrapper_getlateinitptr ( + int pick + ) +{ + switch (pick) { + case PICK_DMI: + return DmiTable; + case PICK_PSTATE: + return AcpiPstate; + case PICK_SRAT: + return AcpiSrat; + case PICK_SLIT: + return AcpiSlit; + case PICK_WHEA_MCE: + return AcpiWheaMce; + case PICK_WHEA_CMC: + return AcpiWheaCmc; + case PICK_ALIB: + return AcpiAlib; + case PICK_IVRS: + return AcpiIvrs; + default: + return NULL; + } +} + +UINT32 +agesawrapper_amdinitmid ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + /* Enable MMIO on AMD CPU Address Map Controller */ + agesawrapper_amdinitcpuio (); + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + + ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr)->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ + status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return (UINT32)status; +} + +UINT32 +agesawrapper_amdinitlate ( + VOID + ) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_LATE_PARAMS *AmdLateParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + /* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */ + AmdCreateStruct(&AmdParamStruct); + AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr; + Status = AmdInitLate(AmdLateParams); + /* CDIT table is not created. */ + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + DmiTable = AmdLateParams->DmiTable; + AcpiPstate = AmdLateParams->AcpiPState; + AcpiSrat = AmdLateParams->AcpiSrat; + AcpiSlit = AmdLateParams->AcpiSlit; + + AcpiWheaMce = AmdLateParams->AcpiWheaMce; + AcpiWheaCmc = AmdLateParams->AcpiWheaCmc; + AcpiAlib = AmdLateParams->AcpiAlib; + AcpiIvrs = AmdLateParams->AcpiIvrs; + + printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x," + "AcpiSlit:%x, Mce:%x, Cmc:%x," + "Alib:%x, AcpiIvrs:%x in %s\n", + (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat, + (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc, + (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__); + + /* AmdReleaseStruct (&AmdParamStruct); */ + return (UINT32)Status; +} + +UINT32 +agesawrapper_amdlaterunaptask ( + UINT32 Func, + UINT32 Data, + VOID *ConfigPtr + ) +{ + AGESA_STATUS Status; + AP_EXE_PARAMS ApExeParams; + + LibAmdMemFill (&ApExeParams, + 0, + sizeof (AP_EXE_PARAMS), + &(ApExeParams.StdHeader)); + + ApExeParams.StdHeader.AltImageBasePtr = 0; + ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + ApExeParams.StdHeader.Func = 0; + ApExeParams.StdHeader.ImageBasePtr = 0; + ApExeParams.FunctionNumber = Func; + ApExeParams.RelatedDataBlock = ConfigPtr; + + Status = AmdLateRunApTask (&ApExeParams); + if (Status != AGESA_SUCCESS) { + /* agesawrapper_amdreadeventlog(); */ + ASSERT(Status == AGESA_SUCCESS); + } + + return (UINT32)Status; +} + +#if CONFIG_HAVE_ACPI_RESUME + +UINT32 agesawrapper_amdinitresume(VOID) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESUME_PARAMS *AmdResumeParamsPtr; + S3_DATA_TYPE S3DataType; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; + + AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; + AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeNonVolatile; + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, + (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); + + status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); + + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return (UINT32)status; +} + +#ifndef __PRE_RAM__ + +extern FCH_DATA_BLOCK InitEnvCfgDefault; +STATIC VOID s3_resume_init_data(FCH_DATA_BLOCK *FchParams) +{ + FchParams->Gpp.GppLinkConfig = UserOptions.FchBldCfg->CfgFchGppLinkConfig; + FchParams->Gpp.PortCfg[0].PortPresent = UserOptions.FchBldCfg->CfgFchGppPort0Present; + FchParams->Gpp.PortCfg[1].PortPresent = UserOptions.FchBldCfg->CfgFchGppPort1Present; + FchParams->Gpp.PortCfg[2].PortPresent = UserOptions.FchBldCfg->CfgFchGppPort2Present; + FchParams->Gpp.PortCfg[3].PortPresent = UserOptions.FchBldCfg->CfgFchGppPort3Present; + FchParams->Gpp.PortCfg[0].PortHotPlug = UserOptions.FchBldCfg->CfgFchGppPort0HotPlug; + FchParams->Gpp.PortCfg[1].PortHotPlug = UserOptions.FchBldCfg->CfgFchGppPort1HotPlug; + FchParams->Gpp.PortCfg[2].PortHotPlug = UserOptions.FchBldCfg->CfgFchGppPort2HotPlug; + FchParams->Gpp.PortCfg[3].PortHotPlug = UserOptions.FchBldCfg->CfgFchGppPort3HotPlug; + FchParams->Gpp.GppFunctionEnable = TRUE; /* GppEnable */ + FchParams->Gpp.GppPhyPllPowerDown = TRUE; + FchParams->Gpp.GppDynamicPowerSaving = TRUE; + FchParams->Gpp.UmiPhyPllPowerDown = TRUE; + FchParams->Gpp.NewGppAlgorithm = TRUE; + FchParams->Gpp.GppPortMinPollingTime = 40; + + FchParams->Spi.SpiSpeed = 2; + FchParams->Ir.IrConfig = 3; + + FchParams->HwAcpi.Smbus0BaseAddress = UserOptions.FchBldCfg->CfgSmbus0BaseAddress; + FchParams->HwAcpi.Smbus1BaseAddress = UserOptions.FchBldCfg->CfgSmbus1BaseAddress; + FchParams->HwAcpi.SioPmeBaseAddress = UserOptions.FchBldCfg->CfgSioPmeBaseAddress; + FchParams->HwAcpi.AcpiPm1EvtBlkAddr = UserOptions.FchBldCfg->CfgAcpiPm1EvtBlkAddr; + FchParams->HwAcpi.AcpiPm1CntBlkAddr = UserOptions.FchBldCfg->CfgAcpiPm1CntBlkAddr; + FchParams->HwAcpi.AcpiPmTmrBlkAddr = UserOptions.FchBldCfg->CfgAcpiPmTmrBlkAddr; + FchParams->HwAcpi.CpuControlBlkAddr = UserOptions.FchBldCfg->CfgCpuControlBlkAddr; + FchParams->HwAcpi.AcpiGpe0BlkAddr = UserOptions.FchBldCfg->CfgAcpiGpe0BlkAddr; + FchParams->HwAcpi.SmiCmdPortAddr = UserOptions.FchBldCfg->CfgSmiCmdPortAddr; + FchParams->HwAcpi.AcpiPmaCntBlkAddr = UserOptions.FchBldCfg->CfgAcpiPmaCntBlkAddr; + FchParams->HwAcpi.WatchDogTimerBase = UserOptions.FchBldCfg->CfgWatchDogTimerBase; + FchParams->Sata.SataRaid5Ssid = UserOptions.FchBldCfg->CfgSataRaid5Ssid; + FchParams->Sata.SataRaidSsid = UserOptions.FchBldCfg->CfgSataRaidSsid; + FchParams->Sata.SataAhciSsid = UserOptions.FchBldCfg->CfgSataAhciSsid; + FchParams->Sata.SataIdeSsid = UserOptions.FchBldCfg->CfgSataIdeSsid; + FchParams->Spi.RomBaseAddress = UserOptions.FchBldCfg->CfgSpiRomBaseAddress; + FchParams->Sd.SdSsid = UserOptions.FchBldCfg->CfgSdSsid; + FchParams->Spi.LpcSsid = UserOptions.FchBldCfg->CfgLpcSsid; + FchParams->Hpet.HpetBase = UserOptions.FchBldCfg->CfgHpetBaseAddress; + FchParams->Azalia.AzaliaSsid = UserOptions.FchBldCfg->CfgAzaliaSsid; + FchParams->Smbus.SmbusSsid = UserOptions.FchBldCfg->CfgSmbusSsid; + FchParams->Ide.IdeSsid = UserOptions.FchBldCfg->CfgIdeSsid; + FchParams->Usb.EhciSsid = UserOptions.FchBldCfg->CfgEhciSsid; + FchParams->Usb.OhciSsid = UserOptions.FchBldCfg->CfgOhciSsid; + FchParams->Usb.XhciSsid = UserOptions.FchBldCfg->CfgXhciSsid; + FchParams->Ir.IrPinControl = UserOptions.FchBldCfg->CfgFchIrPinControl; + FchParams->Sd.SdClockControl = UserOptions.FchBldCfg->CfgFchSdClockControl; +} + +UINT32 agesawrapper_fchs3earlyrestore (VOID) +{ + AGESA_STATUS status = AGESA_SUCCESS; + + FCH_DATA_BLOCK FchParams; + AMD_CONFIG_PARAMS StdHeader; + + StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; + StdHeader.AltImageBasePtr = 0; + StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + StdHeader.Func = 0; + StdHeader.ImageBasePtr = 0; + + FchParams = InitEnvCfgDefault; + FchParams.StdHeader = &StdHeader; + s3_resume_init_data(&FchParams); + + FchInitS3EarlyRestore(&FchParams); + + return status; +} +#endif + +UINT32 agesawrapper_amds3laterestore (VOID) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + AMD_S3LATE_PARAMS AmdS3LateParams; + AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; + S3_DATA_TYPE S3DataType; + + agesawrapper_amdinitcpuio(); + LibAmdMemFill (&AmdS3LateParams, + 0, + sizeof (AMD_S3LATE_PARAMS), + &(AmdS3LateParams.StdHeader)); + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.AllocationMethod = ByHost; + AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; + AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdS3LateParamsPtr = &AmdS3LateParams; + AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); + + AmdCreateStruct (&AmdInterfaceParams); + + AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeVolatile; + + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, + (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); + + Status = AmdS3LateRestore (AmdS3LateParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + return (UINT32)Status; +} + +#ifndef __PRE_RAM__ + +extern UINT8 picr_data[0x54], intr_data[0x54]; + +UINT32 agesawrapper_fchs3laterestore (VOID) +{ + AGESA_STATUS status = AGESA_SUCCESS; + + FCH_DATA_BLOCK FchParams; + AMD_CONFIG_PARAMS StdHeader; + UINT8 byte; + + StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; + StdHeader.AltImageBasePtr = 0; + StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + StdHeader.Func = 0; + StdHeader.ImageBasePtr = 0; + + FchParams = InitEnvCfgDefault; + FchParams.StdHeader = &StdHeader; + s3_resume_init_data(&FchParams); + FchInitS3LateRestore(&FchParams); + /* PIC IRQ routine */ + for (byte = 0x0; byte < sizeof(picr_data); byte ++) { + outb(byte, 0xC00); + outb(picr_data[byte], 0xC01); + } + + /* APIC IRQ routine */ + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + return status; +} +#endif + +#ifndef __PRE_RAM__ + +UINT32 agesawrapper_amdS3Save(VOID) +{ + AGESA_STATUS Status; + AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + S3_DATA_TYPE S3DataType; + + LibAmdMemFill (&AmdInterfaceParams, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdInterfaceParams.StdHeader)); + + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdInterfaceParams.AllocationMethod = PostMemDram; + AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; + AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; + AmdInterfaceParams.StdHeader.Func = 0; + + AmdCreateStruct(&AmdInterfaceParams); + AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; + AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; + + Status = AmdS3Save(AmdS3SaveParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + S3DataType = S3DataTypeNonVolatile; + printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n", + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage); + + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.NvStorage); + + printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n", + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); + + if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { + S3DataType = S3DataTypeVolatile; + + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); + } + OemAgesaSaveMtrr(); + + AmdReleaseStruct (&AmdInterfaceParams); + + return (UINT32)Status; +} + +#endif /* #ifndef __PRE_RAM__ */ +#endif /* CONFIG_HAVE_ACPI_RESUME */ + +UINT32 +agesawrapper_amdreadeventlog ( + UINT8 HeapStatus + ) +{ + AGESA_STATUS Status; + EVENT_PARAMS AmdEventParams; + + LibAmdMemFill (&AmdEventParams, + 0, + sizeof (EVENT_PARAMS), + &(AmdEventParams.StdHeader)); + + AmdEventParams.StdHeader.AltImageBasePtr = 0; + AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdEventParams.StdHeader.Func = 0; + AmdEventParams.StdHeader.ImageBasePtr = 0; + AmdEventParams.StdHeader.HeapStatus = HeapStatus; + Status = AmdReadEventLog (&AmdEventParams); + while (AmdEventParams.EventClass != 0) { + printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo); + printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2); + printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4); + Status = AmdReadEventLog (&AmdEventParams); + } + + return (UINT32)Status; +} diff --git a/src/mainboard/asrock/imb-a180/agesawrapper.h b/src/mainboard/asrock/imb-a180/agesawrapper.h new file mode 100644 index 0000000..db893cd --- /dev/null +++ b/src/mainboard/asrock/imb-a180/agesawrapper.h @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ + +#ifndef _AGESAWRAPPER_H_ +#define _AGESAWRAPPER_H_ + +#include <stdint.h> +#include "Porting.h" +#include "AGESA.h" + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +/* Define AMD Ontario APPU SSID/SVID */ +#define AMD_APU_SVID 0x1022 +#define AMD_APU_SSID 0x1234 +#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS + +enum { + PICK_DMI, /* DMI Interface */ + PICK_PSTATE, /* Acpi Pstate SSDT Table */ + PICK_SRAT, /* SRAT Table */ + PICK_SLIT, /* SLIT Table */ + PICK_WHEA_MCE, /* WHEA MCE table */ + PICK_WHEA_CMC, /* WHEA CMV table */ + PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ + PICK_IVRS, /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */ +}; + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + +typedef struct { + UINT32 CalloutName; + AGESA_STATUS (*CalloutPtr) (UINT32 Func, UINT32 Data, VOID* ConfigPtr); +} BIOS_CALLOUT_STRUCT; + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*--------------------------------------------------------------------------------------- + * L O C A L F U N C T I O N S + *--------------------------------------------------------------------------------------- + */ + +UINT32 agesawrapper_amdinitreset (void); +UINT32 agesawrapper_amdinitearly (void); +UINT32 agesawrapper_amdinitenv (void); +UINT32 agesawrapper_amdinitlate (void); +UINT32 agesawrapper_amdinitpost (void); +UINT32 agesawrapper_amdinitmid (void); +UINT32 agesawrapper_amdreadeventlog (UINT8 HeapStatus); +UINT32 agesawrapper_amdinitmmio (void); +UINT32 agesawrapper_amdinitcpuio (void); +void *agesawrapper_getlateinitptr (int pick); +UINT32 agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, void *ConfigPtr); +UINT32 agesawrapper_amdS3Save(VOID); +UINT32 agesawrapper_amdinitresume(VOID); +UINT32 agesawrapper_amds3laterestore (VOID); + +UINT32 agesawrapper_fchs3earlyrestore (VOID); +UINT32 agesawrapper_fchs3laterestore (VOID); + +UINT32 GetHeapBase(AMD_CONFIG_PARAMS *StdHeader); + +#endif diff --git a/src/mainboard/asrock/imb-a180/buildOpts.c b/src/mainboard/asrock/imb-a180/buildOpts.c new file mode 100644 index 0000000..d0aae25 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/buildOpts.c @@ -0,0 +1,505 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * AMD User options selection for a Brazos platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ + */ + +#include "AGESA.h" +//#include "CommonReturns.h" +#include "Filecode.h" +#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE + +#define INSTALL_FT3_SOCKET_SUPPORT TRUE +#define INSTALL_FAMILY_16_MODEL_0x_SUPPORT TRUE + +#define INSTALL_G34_SOCKET_SUPPORT FALSE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT FALSE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP2_SOCKET_SUPPORT FALSE +#define INSTALL_FT1_SOCKET_SUPPORT FALSE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE +#define INSTALL_FM2_SOCKET_SUPPORT FALSE + + +#ifdef BLDOPT_REMOVE_FT3_SOCKET_SUPPORT + #if BLDOPT_REMOVE_FT3_SOCKET_SUPPORT == TRUE + #undef INSTALL_FT3_SOCKET_SUPPORT + #define INSTALL_FT3_SOCKET_SUPPORT FALSE + #endif +#endif + +//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE +//#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE +//#define BLDOPT_REMOVE_ECC_SUPPORT TRUE +//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE +#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE +#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE +//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE +#define BLDOPT_REMOVE_SRAT FALSE //TRUE +#define BLDOPT_REMOVE_SLIT FALSE //TRUE +#define BLDOPT_REMOVE_WHEA FALSE //TRUE +#define BLDOPT_REMOVE_CRAT TRUE +//#define BLDOPT_REMOVE_DMI FALSE //TRUE +//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE + +//This element selects whether P-States should be forced to be independent, +// as reported by the ACPI _PSD object. For single-link processors, +// setting TRUE for OS to support this feature. + +//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE + +#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER +/* Build configuration values here. + */ +#define BLDCFG_VRM_CURRENT_LIMIT 15000 +#define BLDCFG_VRM_NB_CURRENT_LIMIT 13000 +#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 21000 +#define BLDCFG_VRM_SVI_OCP_LEVEL BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT +#define BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT 17000 +#define BLDCFG_VRM_NB_SVI_OCP_LEVEL BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 +#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 0 +#define BLDCFG_VRM_SLEW_RATE 10000 +#define BLDCFG_VRM_NB_SLEW_RATE BLDCFG_VRM_SLEW_RATE +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE + +#define BLDCFG_PLAT_NUM_IO_APICS 3 +#define BLDCFG_GNB_IOAPIC_ADDRESS 0xFEC20000 +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_MEM_INIT_PSTATE 0 +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 // Specifies the IO addresses trapped by the + // core for C-state entry requests. A value + // of 0 in this field specifies that the core + // does not trap any IO addresses for C-state entry. + // Values greater than 0xFFF8 results in undefined behavior. +#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 + +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE + +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT +#define BLDCFG_ONLINE_SPARE FALSE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1866_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE +#define BLDCFG_ENABLE_ECC_FEATURE TRUE +#define BLDCFG_ECC_REDIRECTION FALSE +#define BLDCFG_SCRUB_DRAM_RATE 0 +#define BLDCFG_SCRUB_L2_RATE 0 +#define BLDCFG_SCRUB_L3_RATE 0 +#define BLDCFG_SCRUB_IC_RATE 0 +#define BLDCFG_SCRUB_DC_RATE 0 +#define BLDCFG_ECC_SYNC_FLOOD TRUE +#define BLDCFG_ECC_SYMBOL_SIZE 4 +#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000ul +#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED +#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeDisabled +#define BLDCFG_IOMMU_SUPPORT FALSE +#define OPTION_GFX_INIT_SVIEW FALSE +//#define BLDCFG_PLATFORM_POWER_POLICY_MODE BatteryLife + +//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL OEM_LCD_BACK_LIGHT_CONTROL +#define BLDCFG_CFG_ABM_SUPPORT TRUE + +#define BLDCFG_CFG_GNB_HD_AUDIO TRUE +//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID +//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID +//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID + +#ifdef PCIEX_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_BASE PCIEX_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE (PCIEX_LENGTH >> 20) +#endif + +#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' +#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' +#define BLDCFG_PCIE_TRAINING_ALGORITHM PcieTrainingDistributed + +/* Process the options... + * This file include MUST occur AFTER the user option selection settings + */ +#define AGESA_ENTRY_INIT_RESET TRUE +#define AGESA_ENTRY_INIT_RECOVERY FALSE +#define AGESA_ENTRY_INIT_EARLY TRUE +#define AGESA_ENTRY_INIT_POST TRUE +#define AGESA_ENTRY_INIT_ENV TRUE +#define AGESA_ENTRY_INIT_MID TRUE +#define AGESA_ENTRY_INIT_LATE TRUE +#define AGESA_ENTRY_INIT_S3SAVE TRUE +#define AGESA_ENTRY_INIT_RESUME TRUE //TRUE +#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE +#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE +/* + * Customized OEM build configurations for FCH component + */ +// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 +// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 +// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 +// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 +// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 +// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 +// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 +// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 +// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 +// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 +// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 +// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 +// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 +// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 +// #define BLDCFG_AZALIA_SSID 0x780D1022 +// #define BLDCFG_SMBUS_SSID 0x780B1022 +// #define BLDCFG_IDE_SSID 0x780C1022 +// #define BLDCFG_SATA_AHCI_SSID 0x78011022 +// #define BLDCFG_SATA_IDE_SSID 0x78001022 +// #define BLDCFG_SATA_RAID5_SSID 0x78031022 +// #define BLDCFG_SATA_RAID_SSID 0x78021022 +// #define BLDCFG_EHCI_SSID 0x78081022 +// #define BLDCFG_OHCI_SSID 0x78071022 +// #define BLDCFG_LPC_SSID 0x780E1022 +// #define BLDCFG_SD_SSID 0x78061022 +// #define BLDCFG_XHCI_SSID 0x78121022 +// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE +// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 +// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE + +CONST AP_MTRR_SETTINGS ROMDATA KabiniApMtrrSettingsList[] = +{ + { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 }, + { CPU_LIST_TERMINAL } +}; + +#define BLDCFG_AP_MTRR_SETTINGS_LIST &KabiniApMtrrSettingsList + +//#include "KeralaInstall.h" + +/* Include the files that instantiate the configuration definitions. */ +#include "cpuRegisters.h" +#include "cpuFamRegisters.h" +#include "cpuFamilyTranslation.h" +#include "AdvancedApi.h" +#include "heapManager.h" +#include "CreateStruct.h" +#include "cpuFeatures.h" +#include "Table.h" +#include "CommonReturns.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "GnbInterface.h" + + // This is the delivery package title, "BrazosPI" + // This string MUST be exactly 8 characters long +#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} + + // This is the release version number of the AGESA component + // This string MUST be exactly 12 characters long +#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '} + +/* MEMORY_BUS_SPEED */ +//#define DDR400_FREQUENCY 200 ///< DDR 400 +//#define DDR533_FREQUENCY 266 ///< DDR 533 +//#define DDR667_FREQUENCY 333 ///< DDR 667 +//#define DDR800_FREQUENCY 400 ///< DDR 800 +//#define DDR1066_FREQUENCY 533 ///< DDR 1066 +//#define DDR1333_FREQUENCY 667 ///< DDR 1333 +//#define DDR1600_FREQUENCY 800 ///< DDR 1600 +//#define DDR1866_FREQUENCY 933 ///< DDR 1866 +//#define DDR2100_FREQUENCY 1050 ///< DDR 2100 +//#define DDR2133_FREQUENCY 1066 ///< DDR 2133 +//#define DDR2400_FREQUENCY 1200 ///< DDR 2400 +//#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency +// +///* QUANDRANK_TYPE*/ +//#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +//#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM +// +///* USER_MEMORY_TIMING_MODE */ +//#define TIMING_MODE_AUTO 0 ///< Use best rate possible +//#define TIMING_MODE_LIMITED 1 ///< Set user top limit +//#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed +// +///* POWER_DOWN_MODE */ +//#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +//#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode + +/* + * Agesa optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +#define DFLT_SMBUS0_BASE_ADDRESS 0xB00 +#define DFLT_SMBUS1_BASE_ADDRESS 0xB20 +#define DFLT_SIO_PME_BASE_ADDRESS 0xE00 +#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 +#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 +#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 +#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 +#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 +#define DFLT_SPI_BASE_ADDRESS 0xFEC10000 +#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 +#define DFLT_HPET_BASE_ADDRESS 0xFED00000 +#define DFLT_SMI_CMD_PORT 0xB0 +#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 +#define DFLT_GEC_BASE_ADDRESS 0xFED61000 +#define DFLT_AZALIA_SSID 0x780D1022 +#define DFLT_SMBUS_SSID 0x780B1022 +#define DFLT_IDE_SSID 0x780C1022 +#define DFLT_SATA_AHCI_SSID 0x78011022 +#define DFLT_SATA_IDE_SSID 0x78001022 +#define DFLT_SATA_RAID5_SSID 0x78031022 +#define DFLT_SATA_RAID_SSID 0x78021022 +#define DFLT_EHCI_SSID 0x78081022 +#define DFLT_OHCI_SSID 0x78071022 +#define DFLT_LPC_SSID 0x780E1022 +#define DFLT_SD_SSID 0x78061022 +#define DFLT_XHCI_SSID 0x78121022 +#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE +#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +#define DFLT_FCH_GPP_LINK_CONFIG PortA4 +#define DFLT_FCH_GPP_PORT0_PRESENT FALSE +#define DFLT_FCH_GPP_PORT1_PRESENT FALSE +#define DFLT_FCH_GPP_PORT2_PRESENT FALSE +#define DFLT_FCH_GPP_PORT3_PRESENT FALSE +#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE +//#define BLDCFG_IR_PIN_CONTROL 0x33 + +GPIO_CONTROL imba180_gpio[] = { + {183, Function1, GpioIn | GpioOutEnB | PullUpB}, + {-1} +}; +//#define BLDCFG_FCH_GPIO_CONTROL_LIST (&imba180_gpio[0]) + +// The following definitions specify the default values for various parameters in which there are +// no clearly defined defaults to be used in the common file. The values below are based on product +// and BKDG content, please consult the AGESA Memory team for consultation. +#define DFLT_SCRUB_DRAM_RATE (0) +#define DFLT_SCRUB_L2_RATE (0) +#define DFLT_SCRUB_L3_RATE (0) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define DFLT_VRM_SLEW_RATE (5000) + +#include "PlatformInstall.h" + +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + // + // The following macros are supported (use comma to separate macros): + // + // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) + // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. + // AGESA will base on this value to disable unused MemClk to save power. + // Example: + // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: + // Bit AM3/S1g3 pin name + // 0 M[B,A]_CLK_H/L[0] + // 1 M[B,A]_CLK_H/L[1] + // 2 M[B,A]_CLK_H/L[2] + // 3 M[B,A]_CLK_H/L[3] + // 4 M[B,A]_CLK_H/L[4] + // 5 M[B,A]_CLK_H/L[5] + // 6 M[B,A]_CLK_H/L[6] + // 7 M[B,A]_CLK_H/L[7] + // And platform has the following routing: + // CS0 M[B,A]_CLK_H/L[4] + // CS1 M[B,A]_CLK_H/L[2] + // CS2 M[B,A]_CLK_H/L[3] + // CS3 M[B,A]_CLK_H/L[5] + // Then platform can specify the following macro: + // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) + // + // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) + // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. + // AGESA will base on this value to tristate unused CKE to save power. + // + // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) + // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. + // AGESA will base on this value to tristate unused ODT pins to save power. + // + // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) + // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. + // AGESA will base on this value to tristate unused Chip select to save power. + // + // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) + // Specifies the number of DIMM slots per channel. + // + // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) + // Specifies the number of Chip selects per channel. + // + // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) + // Specifies the number of channels per socket. + // + // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) + // Specifies DDR bus speed of channel ChannelID on socket SocketID. + // + // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) + // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) + // + // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Specifies the write leveling seed for a channel of a socket. + // + // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Speicifes the HW RXEN training seed for a channel of a socket + // + #define SEED_A 0x12 + HW_RXEN_SEED( + ANY_SOCKET, CHANNEL_A, ALL_DIMMS, + SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, + SEED_A), + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + MOTHER_BOARD_LAYERS (LAYERS_4), + + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + +/* + * These tables are optional and may be used to adjust memory timing settings + */ +#include "mm.h" +#include "mn.h" + +// Customer table +UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] = +{ + // Hardcoded Memory Training Values + + // The following macro should be used to override training values for your platform + // + // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), + // + // NOTE: + // The following training hardcode values are example values that were taken from a tilapia motherboard + // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in + // the table and replace the byte lane values with your own. + // + // ------------------ BYTE LANES ---------------------- + // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC + // Write Data Timing + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 + + // DQS Receiver Enable + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 + + // Write DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 + + // Read DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 + //-------------------------------------------------------------------------------------------------------------------------------------------------- + // TABLE END + NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table +}; +UINT8 SizeOfTableTN = sizeof (AGESA_MEM_TABLE_TN) / sizeof (AGESA_MEM_TABLE_TN[0]); diff --git a/src/mainboard/asrock/imb-a180/cmos.layout b/src/mainboard/asrock/imb-a180/cmos.layout new file mode 100644 index 0000000..f6b5806 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/cmos.layout @@ -0,0 +1,114 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#***************************************************************************** + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asrock/imb-a180/devicetree.cb b/src/mainboard/asrock/imb-a180/devicetree.cb new file mode 100644 index 0000000..3bcaaee --- /dev/null +++ b/src/mainboard/asrock/imb-a180/devicetree.cb @@ -0,0 +1,76 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2013 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +chip northbridge/amd/agesa/family16kb/root_complex + device cpu_cluster 0 on + chip cpu/amd/agesa/family16kb + device lapic 0 on end + end + end + + device domain 0 on + subsystemid 0x1022 0x1410 inherit + chip northbridge/amd/agesa/family16kb # CPU side of HT root complex + + chip northbridge/amd/agesa/family16kb # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # x4 PCIe slot + device pci 2.2 on end # mPCIe slot + device pci 2.3 on end # Realtek NIC + device pci 2.4 on end # Edge Connector + device pci 2.5 on end # Edge Connector + end #chip northbridge/amd/agesa/family16kb + + chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on end # LPC 0x439d + device pci 14.7 on end # SD + end #chip southbridge/amd/hudson + + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + register "spdAddrLookup" = " + { + { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses + { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/family16kb # CPU side of HT root complex + end #domain +end #northbridge/amd/agesa/family16kb/root_complex diff --git a/src/mainboard/asrock/imb-a180/dsdt.asl b/src/mainboard/asrock/imb-a180/dsdt.asl new file mode 100644 index 0000000..78d9bca --- /dev/null +++ b/src/mainboard/asrock/imb-a180/dsdt.asl @@ -0,0 +1,84 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "AMD ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Globals for the platform */ + #include "acpi/mainboard.asl" + + /* Describe the USB Overcurrent pins */ + #include "acpi/usb_oc.asl" + + /* PCI IRQ mapping for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pcie.asl> + + /* Describe the processor tree (_PR) */ + #include <cpu/amd/agesa/family16kb/acpi/cpu.asl> + + /* Contains the supported sleep states for this chipset */ + #include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl> + + /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ + #include "acpi/sleep.asl" + + /* System Bus */ + Scope(_SB) { /* Start _SB scope */ + /* global utility methods expected within the _SB scope */ + #include <arch/x86/acpi/globutil.asl> + + /* Describe IRQ Routing mapping for this platform (within the _SB scope) */ + #include "acpi/routing.asl" + + Device(PCI0) { + /* Describe the AMD Northbridge */ + #include <northbridge/amd/agesa/family16kb/acpi/northbridge.asl> + + /* Describe the AMD Fusion Controller Hub Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/fch.asl> + } + + /* Describe PCI INT[A-H] for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl> + + } /* End _SB scope */ + + /* Describe SMBUS for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/smbus.asl> + + /* Define the General Purpose Events for the platform */ + #include "acpi/gpe.asl" + + /* Define the Thermal zones and methods for the platform */ + #include "acpi/thermal.asl" + + /* Define the System Indicators for the platform */ + #include "acpi/si.asl" +} +/* End of ASL file */ diff --git a/src/mainboard/asrock/imb-a180/get_bus_conf.c b/src/mainboard/asrock/imb-a180/get_bus_conf.c new file mode 100644 index 0000000..0d379d5 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/get_bus_conf.c @@ -0,0 +1,143 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#include <cpu/amd/amdfam14.h> +#include "agesawrapper.h" + +/* Global variables for MB layouts and these will be shared by irqtable mptable + * and acpi_tables busnum is default. + */ +u8 bus_isa; +u8 bus_yangtze[3]; +u32 apicid_yangtze; + +/* + * Here you only need to set value in pci1234 for HT-IO that could be installed or not + * You may need to preset pci1234 for HTIO board, + * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + */ +u32 pci1234x[] = { + 0x0000ff0, +}; + +u32 bus_type[256]; +u32 sbdn_yangtze; + +static u32 get_bus_conf_done = 0; + +#if CONFIG_HAVE_ACPI_RESUME +extern u8 acpi_slp_type; +#endif +void get_bus_conf(void) +{ + u32 apicid_base; + u32 status; + + device_t dev; + int i, j; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + + get_bus_conf_done = 1; + + /* + * This is the call to AmdInitLate. It is really in the wrong place, conceptually, + * but functionally within the coreboot model, this is the best place to make the + * call. The logically correct place to call AmdInitLate is after PCI scan is done, + * after the decision about S3 resume is made, and before the system tables are + * written into RAM. The routine that is responsible for writing the tables is + * "write_tables", called near the end of "hardwaremain". There is no platform + * specific entry point between the S3 resume decision point and the call to + * "write_tables", and the next platform specific entry points are the calls to + * the ACPI table write functions. The first of ose would seem to be the right + * place, but other table write functions, e.g. the PIRQ table write function, are + * called before the ACPI tables are written. This routine is called at the beginning + * of each of the write functions called prior to the ACPI write functions, so this + * becomes the best place for this call. + */ +#if CONFIG_HAVE_ACPI_RESUME + if (acpi_slp_type != 3) { + status = agesawrapper_amdinitlate(); + if(status) { + printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status); + } + status = agesawrapper_amdS3Save(); + if (status) { + printk(BIOS_DEBUG, "agesawrapper_amds3save failed: %x \n", status); + } + } +#else + status = agesawrapper_amdinitlate(); + if (status) + printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status); +#endif + dev = dev_find_slot(0, PCI_DEVFN(0, 0)); /* clear IoapicSbFeatureEn */ + pci_write_config32(dev, 0xF8, 0); + pci_write_config32(dev, 0xFC, 5); /* TODO: move it to dsdt.asl */ + + sbdn_yangtze = 0; + + for (i = 0; i < 3; i++) { + bus_yangtze[i] = 0; + } + + for (i = 0; i < 256; i++) { + bus_type[i] = 0; /* default ISA bus. */ + } + + bus_type[0] = 1; /* pci */ + + // bus_yangtze[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_yangtze[0] = (pci1234x[0] >> 16) & 0xff; + + /* yangtze */ + dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, 4)); + + if (dev) { + bus_yangtze[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + for (j = bus_yangtze[1]; j < bus_isa; j++) + bus_type[j] = 1; + } + + for (i = 0; i < 4; i++) { + dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, i)); + if (dev) { + bus_yangtze[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + } + for (j = bus_yangtze[2]; j < bus_isa; j++) + bus_type[j] = 1; + + /* I/O APICs: APIC ID Version State Address */ + bus_isa = 10; + apicid_base = CONFIG_MAX_CPUS; + apicid_yangtze = apicid_base; +} diff --git a/src/mainboard/asrock/imb-a180/irq_tables.c b/src/mainboard/asrock/imb-a180/irq_tables.c new file mode 100644 index 0000000..9779153 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/irq_tables.c @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdfam16.h> + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern u8 bus_isa; +extern u8 bus_yangtze[2]; +extern unsigned long sbdn_yangtze; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_yangtze[0]; + pirq->rtr_devfn = ((sbdn_yangtze + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_yangtze[0], ((sbdn_yangtze + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/asrock/imb-a180/mainboard.c b/src/mainboard/asrock/imb-a180/mainboard.c new file mode 100644 index 0000000..0a3f9a5 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/mainboard.c @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include <arch/acpi.h> +#include "BiosCallOuts.h" +#include <cpu/amd/agesa/s3_resume.h> +#include "agesawrapper.h" + +/********************************************** + * enable the dedicated function in mainboard. + **********************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + /* + * The mainboard is the first place that we get control in ramstage. Check + * for S3 resume and call the approriate AGESA/CIMx resume functions. + */ +#if CONFIG_HAVE_ACPI_RESUME + acpi_slp_type = acpi_get_sleep_type(); + if (acpi_slp_type == 3) + agesawrapper_fchs3earlyrestore(); +#endif +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/asrock/imb-a180/mptable.c b/src/mainboard/asrock/imb-a180/mptable.c new file mode 100644 index 0000000..118f860 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/mptable.c @@ -0,0 +1,245 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam15.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include "southbridge/amd/agesa/hudson/hudson.h" /* pm_ioread() */ + +//-#define IO_APIC_ID CONFIG_MAX_PHYSICAL_CPUS + 1 +#define IO_APIC_ID CONFIG_MAX_CPUS +extern u8 bus_yangtze[3]; + +extern u32 bus_type[256]; +extern u32 sbdn_yangtze; +extern u32 apicid_yangtze; + +u8 picr_data[0x54] = { + 0x03,0x04,0x05,0x07,0x0B,0x0A,0x1F,0x1F,0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x1F,0x1F,0x1F,0x03,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x05,0x04,0x05,0x04,0x04,0x05,0x04,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x04,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x03,0x04,0x05,0x07 +}; +u8 intr_data[0x54] = { + 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length) +{ + mc->mpc_length += length; + mc->mpc_entry_count++; +} + +static void my_smp_write_bus(struct mp_config_table *mc, + unsigned char id, const char *bustype) +{ + struct mpc_config_bus *mpc; + mpc = smp_next_mpc_entry(mc); + memset(mpc, '\0', sizeof(*mpc)); + mpc->mpc_type = MP_BUS; + mpc->mpc_busid = id; + memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype)); + smp_add_mpc_entry(mc, sizeof(*mpc)); +} + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + u32 dword; + u8 byte; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + memcpy(mc->mpc_oem, "AMD ", 8); + + smp_write_processors(mc); + + get_bus_conf(); + + //mptable_write_buses(mc, NULL, &bus_isa); + my_smp_write_bus(mc, 0, "PCI "); + my_smp_write_bus(mc, 1, "PCI "); + bus_isa = 0x02; + my_smp_write_bus(mc, bus_isa, "ISA "); + + /* I/O APICs: APIC ID Version State Address */ + + dword = 0; + dword = pm_ioread(0x34) & 0xF0; + dword |= (pm_ioread(0x35) & 0xFF) << 8; + dword |= (pm_ioread(0x36) & 0xFF) << 16; + dword |= (pm_ioread(0x37) & 0xFF) << 24; + /* Set IO APIC ID onto IO_APIC_ID */ + write32 (dword, 0x00); + write32 (dword + 0x10, IO_APIC_ID << 24); + apicid_yangtze = IO_APIC_ID; + smp_write_ioapic(mc, apicid_yangtze, 0x21, dword); + + smp_write_ioapic(mc, apicid_yangtze+1, 0x21, 0xFEC20000); + /* PIC IRQ routine */ + for (byte = 0x0; byte < sizeof(picr_data); byte ++) { + outb(byte, 0xC00); + outb(picr_data[byte], 0xC01); + } + + /* APIC IRQ routine */ + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } +#if 0 + outb(0x0B, 0xCD6); + outb(0x02, 0xCD7); + + outb(0x50, 0xCD6); + outb(0x1F, 0xCD7); + + outb(0x48, 0xCD6); + outb(0xF2, 0xCD7); + + //outb(0xBE, 0xCD6); + //outb(0x52, 0xCD7); + + outb(0xED, 0xCD6); + outb(0x17, 0xCD7); + + *(volatile u8 *) (0xFED80D00 + 0x31) = 2; + *(volatile u8 *) (0xFED80D00 + 0x32) = 2; + *(volatile u8 *) (0xFED80D00 + 0x33) = 2; + *(volatile u8 *) (0xFED80D00 + 0x34) = 2; + + *(volatile u8 *) (0xFED80100 + 0x31) = 0xc8; + *(volatile u8 *) (0xFED80100 + 0x32) = 0xc8; + *(volatile u8 *) (0xFED80100 + 0x33) = 0xc8; + *(volatile u8 *) (0xFED80100 + 0x34) = 0xa0; + + *(volatile u8 *) (0xFED80D00 + 0x6c) = 1; + *(volatile u8 *) (0xFED80D00 + 0x6E) = 2; + *(volatile u8 *) (0xFED80D00 + 0x6f) = 2; + + *(volatile u8 *) (0xFED80100 + 0x6c) = 0xa0; + *(volatile u8 *) (0xFED80100 + 0x6E) = 0xa8; + *(volatile u8 *) (0xFED80100 + 0x6f) = 0xa0; + + *(volatile u8 *) (0xFED80D00 + 0xA6) = 2; + *(volatile u8 *) (0xFED80100 + 0xA6) = 0; + + *(volatile u8 *) (0xFED80100 + 0x40) = 0xC8; +#endif + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + mptable_add_isa_interrupts(mc, bus_isa, apicid_yangtze, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, int_sign, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), apicid_yangtze, (pin)) + + /* Internal VGA */ + PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); + PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); + + /* SMBUS */ + PCI_INT(0x0, 0x14, 0x0, 0x10); + + /* HD Audio */ + PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); + + /* USB */ + PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); + PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); + PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); + PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); + PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); + PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); + PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]); + + /* sata */ + PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]); + PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); + + /* on board NIC & Slot PCIE. */ + + /* PCI slots */ + /* PCI_SLOT 0. */ + PCI_INT(bus_yangtze[1], 0x5, 0x0, 0x14); + PCI_INT(bus_yangtze[1], 0x5, 0x1, 0x15); + PCI_INT(bus_yangtze[1], 0x5, 0x2, 0x16); + PCI_INT(bus_yangtze[1], 0x5, 0x3, 0x17); + + /* PCI_SLOT 1. */ + PCI_INT(bus_yangtze[1], 0x6, 0x0, 0x15); + PCI_INT(bus_yangtze[1], 0x6, 0x1, 0x16); + PCI_INT(bus_yangtze[1], 0x6, 0x2, 0x17); + PCI_INT(bus_yangtze[1], 0x6, 0x3, 0x14); + + /* PCI_SLOT 2. */ + PCI_INT(bus_yangtze[1], 0x7, 0x0, 0x16); + PCI_INT(bus_yangtze[1], 0x7, 0x1, 0x17); + PCI_INT(bus_yangtze[1], 0x7, 0x2, 0x14); + PCI_INT(bus_yangtze[1], 0x7, 0x3, 0x15); + + PCI_INT(bus_yangtze[2], 0x0, 0x0, 0x12); + PCI_INT(bus_yangtze[2], 0x0, 0x1, 0x13); + PCI_INT(bus_yangtze[2], 0x0, 0x2, 0x14); + + /* PCIe Lan*/ + PCI_INT(0x0, 0x06, 0x0, 0x13); + + /* FCH PCIe PortA */ + PCI_INT(0x0, 0x15, 0x0, 0x10); + /* FCH PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, 0x11); + /* FCH PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, 0x12); + /* FCH PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, 0x13); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asrock/imb-a180/romstage.c b/src/mainboard/asrock/imb-a180/romstage.c new file mode 100644 index 0000000..9b069b7 --- /dev/null +++ b/src/mainboard/asrock/imb-a180/romstage.c @@ -0,0 +1,200 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <device/pnp_def.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <console/loglevel.h> +#include "agesawrapper.h" +#include "cpu/x86/bist.h" +#include "cpu/x86/lapic.h" +#include "southbridge/amd/agesa/hudson/hudson.h" +#include "cpu/amd/agesa/s3_resume.h" +#include "src/drivers/pc80/i8254.c" +#include "src/drivers/pc80/i8259.c" +#include "cbmem.h" +#include "superio/winbond/w83627uhg/early_serial.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627UHG_SP1) + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx); +void disable_cache_as_ram(void); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val, t32; + u32 *addr32; +#if CONFIG_HAVE_ACPI_RESUME + void *resume_backup_memory; +#endif + + /* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for + * LpcClk[1:0]". To be consistent with Parmer, setting to 4mA + * even though the register is not documented in the Kabini BKDG. + * Otherwise the serial output is bad code. + */ + //outb(0xD2, 0xcd6); + //outb(0x00, 0xcd7); + + val = agesawrapper_amdinitmmio(); + + hudson_lpc_port80(); + + /* Enable the AcpiMmio space */ + outb(0x24, 0xcd6); + outb(0x1, 0xcd7); + + /* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */ + addr32 = (u32 *)0xfed80e28; + t32 = *addr32; + t32 &= 0xfff8ffff; + *addr32 = t32; + + /* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */ + addr32 = (u32 *)0xfed80e40; + t32 = *addr32; + t32 &= 0xffffbffb; + *addr32 = t32; + + if (!cpu_init_detectedx && boot_cpu()) { + post_code(0x30); + post_code(0x31); + + /* Set w83627uhg to 48MHz and enable w83627uhg */ + w83627uhg_set_input_clk_sel(SERIAL_DEV, 0); + w83627uhg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + } + + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx); + + /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */ + int i; + for(i = 0; i < 200000; i++) + val = inb(0xcd6); + + post_code(0x37); + val = agesawrapper_amdinitreset(); + if(val) { + printk(BIOS_DEBUG, "agesawrapper_amdinitreset failed: %x \n", val); + } + + post_code(0x38); + printk(BIOS_DEBUG, "Got past yangtze_early_setup\n"); + + post_code(0x39); + + val = agesawrapper_amdinitearly (); + if(val) { + printk(BIOS_DEBUG, "agesawrapper_amdinitearly failed: %x \n", val); + } + printk(BIOS_DEBUG, "Got past agesawrapper_amdinitearly\n"); + +#if CONFIG_HAVE_ACPI_RESUME + if (!acpi_is_wakeup_early()) { /* Check for S3 resume */ +#endif + post_code(0x40); + val = agesawrapper_amdinitpost (); + if(val) { + printk(BIOS_DEBUG, "agesawrapper_amdinitpost failed: %x \n", val); + } + printk(BIOS_DEBUG, "Got past agesawrapper_amdinitpost\n"); + + post_code(0x41); + val = agesawrapper_amdinitenv (); + if(val) { + printk(BIOS_DEBUG, "agesawrapper_amdinitenv failed: %x \n", val); + } + printk(BIOS_DEBUG, "Got past agesawrapper_amdinitenv\n"); + /* TODO: Disable cache is not ok. */ + disable_cache_as_ram(); +#if CONFIG_HAVE_ACPI_RESUME + } else { /* S3 detect */ + printk(BIOS_INFO, "S3 detected\n"); + + post_code(0x60); + printk(BIOS_DEBUG, "agesawrapper_amdinitresume "); + val = agesawrapper_amdinitresume(); + if (val) + printk(BIOS_DEBUG, "error level: %x \n", val); + else + printk(BIOS_DEBUG, "passed.\n"); + + printk(BIOS_DEBUG, "agesawrapper_amds3laterestore "); + val = agesawrapper_amds3laterestore (); + if (val) + printk(BIOS_DEBUG, "error level: %x \n", val); + else + printk(BIOS_DEBUG, "passed.\n"); + + post_code(0x61); + printk(BIOS_DEBUG, "Find resume memory location\n"); + resume_backup_memory = (void *)backup_resume(); + + post_code(0x62); + printk(BIOS_DEBUG, "Move CAR stack.\n"); + move_stack_high_mem(); + printk(BIOS_DEBUG, "stack moved to: 0x%x\n", (u32) (resume_backup_memory + HIGH_MEMORY_SAVE)); + + post_code(0x63); + disable_cache_as_ram(); + printk(BIOS_DEBUG, "CAR disabled.\n"); + set_resume_cache(); + + /* + * Copy the system memory that is in the ramstage area to the + * reserved area. + */ + if (resume_backup_memory) + memcpy(resume_backup_memory, (void *)(CONFIG_RAMBASE), HIGH_MEMORY_SAVE); + + printk(BIOS_DEBUG, "System memory saved. OK to load ramstage.\n"); + } +#endif + + outb(0xEA, 0xCD6); + outb(0x1, 0xcd7); + /* Initialize i8259 pic */ + post_code(0x41); + setup_i8259 (); + + /* Initialize i8254 timers */ + post_code(0x42); + setup_i8254 (); + + post_code(0x50); + copy_and_run(); + + post_code(0x54); /* Should never see this post code. */ +}
-
Siyuan Wang