Patch set updated for coreboot: mainboard/google/pryo: Update touchscreen device ACPI nodes

[Furquan Shaikh]

Furquan Shaikh ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/18239

-gerrit

commit 9be58307e6c03af4420e991b083c0e61143f4b25
Author: Furquan Shaikh 
Date:   Wed Jan 25 19:15:49 2017 -0800

mainboard/google/pryo: Update touchscreen device ACPI nodes

1. For ELAN, export reset GPIO as well as PowerResource
    2. For WCOM, export PowerResource

BUG=chrome-os-partner:62311, chrome-os-partner:60194,
    chrome-os-partner:62371
    BRANCH=reef
    TEST=Verified that touchscreen works on pyro with WCOM device on
    power-on as well as after suspend/resume.

Change-Id: I0306e24e19bf821cd3e08fdacc0d78b494c9a92f
    Signed-off-by: Furquan Shaikh 
---
 src/mainboard/google/reef/variants/pyro/devicetree.cb | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/src/mainboard/google/reef/variants/pyro/devicetree.cb b/src/mainboard/google/reef/variants/pyro/devicetree.cb
index 193fdd8..4713efe 100644
--- a/src/mainboard/google/reef/variants/pyro/devicetree.cb
+++ b/src/mainboard/google/reef/variants/pyro/devicetree.cb
@@ -172,6 +172,9 @@ chip soc/intel/apollolake
    				 .desc = WCOM_TS_DESC,
    				 .irq = IRQ_LEVEL_LOW(GPIO_21_IRQ),
    				 .probed = 1,
+					 .reset_gpio = ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36),
+					 .enable_gpio = ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_152),
+					 .has_power_resource = 1,
    			}"
    			register "hid_desc_reg_offset" = "0x1"
    			device i2c 0xA on end
@@ -181,14 +184,12 @@ chip soc/intel/apollolake
    			register "desc" = ""ELAN Touchscreen""
    			register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
    			register "probed" = "1"
-
-				chip drivers/generic/gpio_regulator
-					register "name" = ""vcc33""
-					register "gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_152)"
-					register "enabled_on_boot" = "1"
-					device generic 0 on end
-				end
-
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
+				register "reset_delay_ms" = "20"
+				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_152)"
+				register "enable_delay_ms" = "1"
+				register "export_gpio_to_crs" = "1"
+				register "has_power_resource" = "1"
    			device i2c 10 on end
    		end
    	end	# - I2C 3