[S] Change in coreboot[main]: soc/mediatek: Rename pmif_ulposc_* function arguments

[Yu-Ping Wu (Code Review)]

Yu-Ping Wu has submitted this change. ( https://review.coreboot.org/c/coreboot/+/85203?usp=email )

Change subject: soc/mediatek: Rename pmif_ulposc_* function arguments
......................................................................

soc/mediatek: Rename pmif_ulposc_* function arguments

Rename the arguments of pmif_ulposc_check() and pmif_ulposc_cali()
to make the frequency unit clearer.

Change-Id: I7719fd4dc43edd47bf014af13fb57ad38f43778c
Signed-off-by: Yu-Ping Wu 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85203
Tested-by: build bot (Jenkins) 
Reviewed-by: Yidi Lin 
---
M src/soc/mediatek/common/include/soc/pmif_clk_common.h
M src/soc/mediatek/common/pmif_clk.c
2 files changed, 12 insertions(+), 12 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Yidi Lin: Looks good to me, approved

diff --git a/src/soc/mediatek/common/include/soc/pmif_clk_common.h b/src/soc/mediatek/common/include/soc/pmif_clk_common.h
index c61cd1a..dc03bfc 100644
--- a/src/soc/mediatek/common/include/soc/pmif_clk_common.h
+++ b/src/soc/mediatek/common/include/soc/pmif_clk_common.h
@@ -3,7 +3,7 @@
 #ifndef __MEDIATEK_SOC_PMIF_CLK_COMMON__
 #define __MEDIATEK_SOC_PMIF_CLK_COMMON__

-int pmif_ulposc_check(u32 current_clk, u32 target_clk);
-int pmif_ulposc_cali(u32 target_val);
+int pmif_ulposc_check(u32 current_clk_mhz, u32 target_clk_mhz);
+int pmif_ulposc_cali(u32 target_freq_mhz);

#endif /*__MEDIATEK_SOC_PMIF_CLK_COMMON__*/
diff --git a/src/soc/mediatek/common/pmif_clk.c b/src/soc/mediatek/common/pmif_clk.c
index f4e1d0e..ee1996e 100644
--- a/src/soc/mediatek/common/pmif_clk.c
+++ b/src/soc/mediatek/common/pmif_clk.c
@@ -6,24 +6,24 @@
 #include <soc/pmif_clk_common.h>
 #include <soc/pmif_sw.h>

-int pmif_ulposc_check(u32 current_clk, u32 target_clk)
+int pmif_ulposc_check(u32 current_clk_mhz, u32 target_clk_mhz)
 {
-	if (current_clk < (target_clk * (1000 - CAL_TOL_RATE) / 1000) ||
-	    current_clk > (target_clk * (1000 + CAL_TOL_RATE) / 1000)) {
+	if (current_clk_mhz < (target_clk_mhz * (1000 - CAL_TOL_RATE) / 1000) ||
+	    current_clk_mhz > (target_clk_mhz * (1000 + CAL_TOL_RATE) / 1000)) {
    	printk(BIOS_WARNING,
    	       "[%s] calibration fail: cur=%dM, CAL_RATE=%d, target=%dM\n",
-		       __func__, current_clk, CAL_TOL_RATE, target_clk);
+		       __func__, current_clk_mhz, CAL_TOL_RATE, target_clk_mhz);
    	return -1;
    }

printk(BIOS_DEBUG,
           "[%s] calibration done: cur=%dM, CAL_RATE=%d, target=%dM\n",
-	       __func__, current_clk, CAL_TOL_RATE, target_clk);
+	       __func__, current_clk_mhz, CAL_TOL_RATE, target_clk_mhz);

return 0;
 }

-int pmif_ulposc_cali(u32 target_val)
+int pmif_ulposc_cali(u32 target_freq_mhz)
 {
    u32 current_val, min = 0, max = CAL_MAX_VAL, middle;
    int diff_by_min, diff_by_max, cal_result;
@@ -34,21 +34,21 @@
    		break;

current_val = pmif_get_ulposc_freq_mhz(middle);
-		if (current_val > target_val)
+		if (current_val > target_freq_mhz)
    		max = middle;
    	else
    		min = middle;
    } while (min <= max);

-	diff_by_min = pmif_get_ulposc_freq_mhz(min) - target_val;
+	diff_by_min = pmif_get_ulposc_freq_mhz(min) - target_freq_mhz;
    diff_by_min = ABS(diff_by_min);

-	diff_by_max = pmif_get_ulposc_freq_mhz(max) - target_val;
+	diff_by_max = pmif_get_ulposc_freq_mhz(max) - target_freq_mhz;
    diff_by_max = ABS(diff_by_max);

cal_result = (diff_by_min < diff_by_max) ? min : max;
    current_val = pmif_get_ulposc_freq_mhz(cal_result);

/* check if calibrated value is in the range of target value +- 15% */
-	return pmif_ulposc_check(current_val, target_val);
+	return pmif_ulposc_check(current_val, target_freq_mhz);
 }